Newsinte SMRGBCD001 2.4G Rechargeable Wireless Mouse User Manual
- June 15, 2024
- Newsinte
Table of Contents
SMRGBCD001 2.4G Rechargeable Wireless Mouse
User Manual
Product instructions
A: 2.4g use method: pro, charging wireless mouse 2.4g link: use needs: 1,
the bottom of the mouse receiver cover inside the USB receiver plug into the
computer, 2, wait 5 seconds to open the power switch at the bottom of the
mouse, then can be used normally! (Please note that in this order, quick
pairing)
B: How to use Bluetooth: 1: Power ON to the ON bit, turn on the Bluetooth
of the device, and click the search: BT3.0Mouse or BT5.2 Mouse.
2: iPad – Settings – Auxiliary functions – Touch – auxiliary touch – open
it. If you can’t find the Bluetooth, turn off the Bluetooth of all connected
devices, save the last device you want to connect to, restart the mouse, long
press (press) DPI and turn on the device Bluetooth synchronization, then you
can reconnect
C: IOs Configuration Mouse connection Method: To upgrade to iOs 13 or
later, open Settings → General → Assistive → Assistive touch → open your phone
or tablet and search for pairing
D: About charging: Micro USB charging interface, you can use any smart
phone charger to charge, charge bank or plug in the COMPUTER USB interface
above charge! When charging, the charging light is blue, and when full, the
charging light is off, so you don’t have to worry about charging for a long
time anymore
E: Precautions: 1. When the mouse moves slowly, please check whether the
battery is low, it is recommended to charge in time;
2. If the mouse cannot be connected, please check whether the power
switch at the bottom of the mouse is turned on, or move the NANO receiver to
another USB interface for use;
3. When you do not use the mouse for a long time, please turn off the
power switch manually to save power;
4. If the mouse is not used for a long time, it will enter sleep state
automatically. You can move the mouse or press any key to wake up.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>