Electrolux EP81 Power Pro WET EPPCS2 Vacuum Cleaners User Guide
- June 13, 2024
- Electrolux
Table of Contents
EP81 Power Pro WET EPPCS2 Vacuum Cleaners
-
Fill the clean water into the inner tank.
1b Detergent optional. -
Place the mop nozzle according to the sign on the top plate.
-
Hold the vacuum cleaner vertically and turn the Power on.
-
Gently press down the PRESS button to wash the pads. Hold the cleaner in an upright position (min 5 sec).
-
Keep the Power on, lift up the vacuum cleaner and release the
-
PRESS button to dry the pads with the radial scraper.
-
Empty the dirty water tank through the drainage hole.
** When washing the pads on your cleaning station, press the cleaner down
only gently and keep it in an upright position. If you use too much force, the
cleaner may switch off. This is a safety feature. If this happens, wait around
10 seconds, switch the cleaner on again and press it down with less force than
before.
To get the best performance out of your UltimateHome 900 handstick vacuum
cleaner or Ultimate/Animal/Hygienic 800 cordless cleaner (EP81), we
recommend that you replace the default black springs under the PRESS button
with the spare silver springs before your first use of the product.
-
Lift and flip the top plate
-
Push inwards the blue pins at the IP bottom of the “PRESS” button with a flat-head screwdriver
-
Detach the “PRESS” button
-
Replace the 2 springs underneath with the spare ones, and Reattach the “PRESS” button, making sure it faces the correct direction
-
Put back the top plate to the bucket
-
