Pyle PBMSQG9 Portable Bluetooth Speaker User Guide

June 4, 2024
Pyle

Pyle PBMSQG9 Portable Bluetooth Speaker

Pyle-PBMSQG9-Wireless-Portable-
Bluetooth-Speaker-img

Specifications

  • MAX POWER OUTPUT: 150 Watt
  • SOUND SYSTEM: 1’’ Full Range Stereo
  • IMPEDANCE: 4 Ohm
  • SIGNAL/NOISE RATIO: >60dB
  • FREQUENCY RESPONSE: 100-16kHz
  • Housing Construction Material: Engineered ABS
  • DIGITAL AUDIO FILE COMPATIBILITY: MP3, WMA
  • MAXIMUM USB FLASH/MICRO SD CARD SUPPORT: Up to 32GB
  • RECHARGEABLE BATTERY: 7V Li-iOn, 1500mAh
  • POWER : DC, 5V/1A
  • DIMENSIONS (L X W X H): 2’’ x 4.5’’ x 4.7’’
  • SOLD AS : Unit

Introduction

High-powered Wireless Active Stereo Speaker with digital sound amplifier for perfect sound that can reach 30 feet. Lightweight and compact, easy to camy and can connect with any wireless devices. Play music from a wide range media, including FM Radio, MP3’s and even streaming services via Bluetooth with absolutely flawless quality crisp, clear sound.

KEY INSTRUNCTIONS

Pyle-PBMSQG9-Wireless-Portable-Bluetooth-Speaker1

  1. Aux-in jack
  2. Charging Jack
  3. ON/OFF
  4. Micro SD slot
  5. USB Port
  6. Play/Pause
  7. Previous/Volume Down
  8. EQ
  9. Next/Volume Up
  10. Mode (Switch Bluetooth,USB disk,Micro SD, FM and AUX-IN state)

Bluetooth

  1. Turn the power button to “ON”. The LED light will turn blue, blinks quickly and beeps twice.
  2. Activate Bluetooth using a mobile phone. Search for device name “PyleUSA” then connect it. The blue LED light will blink slowly and will beep three times once  successfully connected.
  3. Play the music from your mobile phone and enjoy.
  4. Short press PREVIOUS or NEXT button on the device or on Mobile phones to select songs you like.
  5. Press Play/Pause button on the device or on Mobile phone to play/stop the music
  6. Long press PREVIOUS or NEXT button to adjust volume up and down or you can adjust the volume using your mobile phones.

Play Music from USB disk & Micro SD card

  1. Turn the Power button to “ON”. Insert USB flash disk or Micro SD card into the slot, the music stored will be played automatically and the blue LED light will blink slowly.
  2. Under playing mode, short press Previous or Next button to select songs that you like, long press to adjust the volume.
  3. Press PLAY/PAUSE to play or pause.
  4. Please turn the Power button to “OFF” when not in use.

Remark: Under Bluetooth playing mode, inserting USB or Micro SD card will disconnect the Bluetooth and switch the playing from USB or Micro SD card. You can press the MODE button to switch to Bluetooth mode again.

FM Radio:

  1. Under FM radio state, the audio cable provided treat as antenna.
  2. Please insert the audio cable to get the best FM signal before using.
  3. Turn the power button to “ON”, press the “MODE” button to switch to FM radio state.
  4. Under playing mode, short press “Play/Pause”  button to auto search the FM Channel and store it automatically.
  5. Press Previous or NEXT button to change the stored FM channel.

AUX-IN:

For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s  “Line Out”  to the “Aux In” of this devices. Then press the “MODE” button to switch to AUX-IN state. Enjoy…

When using an external device, all functions will be controlled by the external devise except the “Play/Pause”  button.

Remarks:

  1. Press the MODE button to switch different modes, the order is Bluetooth, USB disk, Micro SD card, FM radio and AUX-IN.
  2. Turn the power button to “Off”  to cut off the power supply when not in use.

How to charge

  1. Power off the unit, put the provided charger cable into the charge slot of the unit, connect the other end to a PC or in a charger with DC5V output (not included), the red light charging indicator will be lit.
  2. Charging time should be 3-5 hours. When charging is full, the indicator light will switch off.
  3. In order to prolong the life of battery, please do not charge more than 8 hours.

What’s in the Box

  • Wireless Tube Speaker
  • USB Charging Cable

Audio Connection

Frequently Asked Questions

Can I use a USB flash drive to play my music not just to charge the battery?

Yes, you can use a USB having 32 GB or less.

Does it have a built in mic?

No, it doesn’t have a built-in mic.

Is this really 150W?

Yes, it is really 150 Watts.

Would the 3.5 mm jack work to plug a microphone into (to use like a PA system) or is it only output for headphones?

It features a 3.5 mm input jack, which may be used to connect a microphone.

How long does the battery lasts?

The battery lasts for about 3 hours.

How do you adjust the volume when playing radio?

Press and hold the skips buttons.

Is this waterproof?

No, it isn’t waterproof.

Will this go with the Pyle amplifier?

No, it will not go with the Pyle amplifier.

Will this work with a Bluetooth mic in the Bluetooth mode?

Passive Bluetooth signal is being used by the device. Only devices with Active Bluetooth capabilities, such as smartphones, laptops, desktop computers, tablets, and iPads, can connect to it. Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PBMSQG9 in the search box.

Does this work with a mini home theater projector?

No, it doesn’t.

Can i answer phone calls through the speakers?

No, you can’t.

Does it have volume control?

Yes, the unit comes with volume control.

How do I play AAC songs on it or is it only MP3 files?

The only formats it can read are mp3 and WMA audio files; therefore you must convert AAC forms to those.

Does it have a headphone jack?

Yes, it has a headphone jack.

How do you set stations?

The strongest signal will be sought for when you press the M button. Press the M button one more to lock in a station if you like it.

Does this unit turn on at the last set volume level?

No, it doesn’t turn on at the last set volume level.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals