JILLIAN JMTA4M01 Unisex Adult Multi Function Black Smart Watch User Guide
- June 15, 2024
- JILLIAN
Table of Contents
AIR 4
EDITION
UNPACK CONTENTS
Locate the watch and charging cable inside the box.
CHARGING
Insert the cable into a computer USB port or UL-certified wall charger.
Note: avoid using fast-chargers
FULLY CHARGE WATCH
Line up the metal pins on the charging cable with the contacts on the back of the watch and lower until it snaps into place.
Charging can take up to 2 hours
The magnetic charging cable snaps into place.
A charging screen will appear to confirm your watch is charging.
DOWNLOAD APP
Scan the QR code with your smartphone camera to download our free mobile app.
PAIR YOUR WATCH
Power on the watch (press and hold the side button for 5 seconds), open the
mobile app, create an account,
then tap the watch icon to begin pairing. Pairing sets the time and date on
your watch.
Note: enable Bluetooth on your phone but only pair your watch using mobile app.
VISIT US ONLINE
For the full user manual, help, and answers to many common questions, visit us online:
Enjoy your watch!
FCC REGULATORY COMPLIANCE
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
BATTERY WARNING
– Replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types);
– Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
– Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
– A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
– Operating temperature:
– Charging: 0°C ~ 45°C
– Discharging: -10°C ~ 60°C
E-LABEL NAVIGATION
The e-label can be found in the Information section of your device’s settings.
– Open up Settings page
– Select Regulatory Information
– View e-label for product and compliance information.
FCC ID: 2AJXA-TA4
Product: Smart Watch
Model No: JMTA4M01/JMTA4L01