Koenner Soehnen KS 300PS Portable Power Station Owner’s Manual

KS 300PS Portable Power Station
Owner’s Manual

INTRODUCTION

Thank you for your purchase of Könner & Söhnen® products. This manual contains a brief description of safety, use and debugging. More information can be found on the  official manufacturer’s website in the support section: www .koenner-soehnen.com/manuals
You can also go to the support section and download the full version of the manual by scanning the QR code, or on the website of the official importer of Könner & Söhnen  products: www.koenner-soehnen.com

http://ks-power.de/betriebsantleitungen/

We care about the environment, therefore, we consider it expedient to save paper and leave in print a short description of the most important sections.
Be sure to read the full version of the manual before getting started!
Manufacturer reserves the right to make alterations into the generators, which may not be reflected in this manual. Pictures and photos of the product may vary from its  actual appearance. At the end of this manual, You may find contact information which you are free to use in case of any issues occurrence.
All data, specified in this operation manual is the most up to date for the moment of its publishing. The current list of service centers you can find at the website of official importer: www.koenner-soehnen.com

ATTENTION – DANGER!
Failure to follow the recommendations marked with this sign may lead to serious injury or death of the operator or third parties.
IMPORTANT!
Useful information while operating the machine.
ATTENTION – DANGER!
AC output voltage and frequency will be different depending on different countries or areas.
Please refer to the actual product before using.

ABOUT THE UNIT

Thanks for purchasing our portable solar generator power station. Please read this manual carefully before use and keep it for review.
This manual helps you to operate this device correctly. The images in this manual are for reference only.
Thank you!

MAIN OVERVIEW

MODEL KS 300PS

1. DC Output
2. INPUT
3. DC ON/OFF
4. DC Outputs
5. USB ON/OFF
6. Type-C Output
7. USB Outputs| 8. QC 3.0
9. AC Output
10. AC ON/OFF
11. Power ON/OFF
12. LED-display
13. LED light ON/OFF
---|---

MODELS KS 1200PS-FC, KS 2200PS-FC

1. USB ON/OFF
2. DC ON/OFF
3. DC Outputs
4. DC Input
5. Type-C Outputs
6. USB Output
7. Anderson 1
8. QC 3.0| 9. AC Outputs
10. AC ON/OFF
11. LCD Display
12. DC Output
13. Anderson 2
14. LED Light
15. LED ON/OFF
---|---

ANDERSON 2 PORT CAUTIONS:

1. You should use the original charger or the charger with the same parameters (the voltage range is 25±0.2V and the current range is 5A~40A), and correctly connect it to  the positive and negative poles of this port;
2. This port is a fast charging port, when the device is charged to 90% via it, the charging will stop to protect the device;
3. If the parameters of the charger do not match, the display of this device will light up while the charging will not start.

SPECIFICATIONS

(600000mAh, 3.7V)
Battery Type| high quality lithium-ion batteries
Anderson 1 (30A) PV-Input| –| 18V-30V, 8A Max| 18V-301/, 8A Max
Anderson 2 (50A) QC-Input| –| 25V/22A Max| 25V/40A Max
Charge input| 19V/3A| 25.5V/8A| 25.5V/8A
AC Output| 230V/50Hz| 230V/50Hz| 230V/50Hz
DC Output| 3x12V/8A| 2×124±1V/8A| 2x12V/10A Max
USB Output| 2x5V/2.4A| 5V/2.4A| 3x5V/2.4A
QC 3.0| SV/3A, 9V/2A, 12V/1.5A| 5V/3A, 9V/2A, 12V/1.5A| 5V/3A, 94/2A, 12V/1 .5A
Type-C Output 1| PD 45W, 5V/3A, 94/3A,
12V/3A, 15V/3A| PD 100W, SV/3A, 9V/3A,
12V/3A, 15V/3A, 20V/5A| PD 100W, 5V/3A, 9V/3A, 12V/3A, 1SV/3A, 204/5A
Type-C Output 2| PD 18W, SV/3A, 9V/2A,
12V/1.5A| PD 18W, 5V/3A, 9V/2A,
12V/1.5A
Solar charge input (PV-Input Anderson 1)| 18V–30V/3A Max| Anderson 1, MPPT| Anderson 1, MPPT
Cigar port output| 12V/8A| 12V/8A| 12V/8A
LED Flashlight| 4W| 3W| 4W
Dimensions (LxWxH), mm| 285x155x205| 365x235x280| 466x300x310
Weight, kg| 3.| 12.| 22.
Working Temp| -10 ,C+40°C| -100( 440 °C| -10 °C +40 cC

LED DISPLAY

MODEL KS 300PS

MODELS KS 1200PS-FC, KS 2200PS-FC

7. DC Output

In models E 1200P5-K, KS 2200PS-K the LCD screen will shut down automatically when no outputs are activated within 60 seconds.

BATTERY LEVEL INDICATOR
For model KS 300PS show the percentage of the power. If it shows 0%, please charge it immediately.
For models KS 1200PS-FC, KS 2200PS-FC shows the percentage of the power. Its recommended to charge the power station when battery indicates less than 20%.

FAN INDICATOR
The fan automatically turns on when the battery temperature gets high. CURRENT INPUT
For model KS 300PS show the current input power in watts.
For models KS 1200PS-FC, KS 2200PS-FC shows the current input power in watts and provides remaining charging time in hours under current input.

CURRENT OUTPUT
For model KS 300PS show the current output power in watts..
For models KS 1200PS-FC, KS 2200PS-FC shows the current output power in watts and provides remaining usage time in hours under current output.

TEMPERATURE STATUS INDICATOR (FOR MODEL KS 300PS)
Green light: Under normal temperature
Yellow light Cooling fan starts working when the battery temperature is over 50C°
Red light Over-temperature warning indicates that the temperature of the product is too high. Please cool down before using it again.

FUNCTION FAILURES WARNING
When short-circuit, low voltage, or exceeding maximum current/power limit take place, the Function Failure sign will show on display, and the corresponding outlet indicator will flash simultaneously for 60 sec- onds. At the same time, it automatically stops running immediately. Please remove the overloaded devices and then restart the power station to resume work.

PRODUCT INSTRUCTION

1. POWER ON/OFF
   For model KS 300PS:
   For model KS 300PS: Turn on the product:Press and hold the master POWER button for 2 seconds to turn on the product,the LED indicator light and the display screen will light up.
   Turn off the product: Press and hold the master POWER button for 2 seconds to turn on the product,the LED indicator light and the display screen will turn off.
   It will switch off within 10 seconds automatically when there is no load.
   Please make sure the product is turn on , or you can not turn on AC/DC/USB output.

2. DC OUTPUT ON/OFF
   For model KS 300PS:
   For model KS 300PS: Turn on DC output: Press and hold the DC power button to turn on the product, the corresponding LED indicator light will light up and the display screen will show
   Turn off DC output: Press and hold the DC power button to turn off the product, the corresponding LED indicator light and the display screen will turn off.
   It will switch off within 1 hour automatically when there is no load.
   For models KS 1200PS-FC, KS 2200PS-FC: Turn on DC output: Press the DC power button to turn on DC output, the corresponding indicator light will light  up and the display screen will show . DC output will switch off within 1 hour automatically when there are no loads(less than 2W).
   Turn off DC output: Press the DC power button to turn off the product,the corresponding indicator light and the display screen will turn off.
   

3. USB OUTPUT ON/OFF
   For model KS 300PS: Turn on USB output: Press and hold the USB power button to turn on the product, the corresponding LED indicator light will light up and the  display screen will show and . Turn off USB output: Press and hold the USB power button to turn off the product, the corresponding LED indicator light and the display screen and  will turn off.
   For models KS 1200PS-FC, KS 2200PS-FC: : Turn on USB output: Press the USB power button to turn on USB/TYPE-C output, the corresponding  indicator light will light up and the display screen will show . USB output will switch off within 1 hour automatically when there are no loads (less than 1W).
   Turn off USB output: Press the USB power button to turn off the product, the corresponding indicator light and the display screen will turn off.
   

4. AC OUTPUT ON/OFF
   For model KS 300PS: Turn on AC output: Press and hold the AC power button for 2 seconds to turn on the product,the corresponding LED indicator light will light up and the display screen will show . Turn off AC output: Press and hold the AC power button for 2 seconds to turn off the product, the corresponding LED indicator light and the display screen will turn off It will switch off within 3 hour automatically when there is no load.
   For models KS 1200PS-FC, KS 2200PS-FC: Turn on AC output: Press and hold the AC power button for 2 seconds to turn on the AC output, the  corresponding indicator light will light up and the display screen will show Frequency For models KS 1200PS-FC, KS 2200PS-FC:
   . AC output will switch off within 3 hours automatically when there are no loads(less than 5W).
   Turn off AC output: Press and hold the AC power button for 2 seconds to turn off the product,the corresponding LED indicator light and the display screen will turn off.
   

5. 5. LED LIGHT
   For model KS 300PS: Turn on LED light: Press and hold the LED button for 2 seconds to turn on the light, then one more click to switch the modes, it’s „LED  Lighting mode”, „LED SOS mode”, „LED Flashing mode”.
   Turn off LED light: Press and hold the LED button for 2 seconds to turn off the light.
   KS 1200PS-FC, KS 2200PS-FC: Turn on LED light: Press and hold the LED button for 2 seconds to turn on the light, and the display screen will show . One more click to switch the modes, including „LED Lighting mode”, „LED SOS mode”, „LED Flashing mode”.
   Turn off LED light: Press and hold the LED button for 2 sec- onds to turn off the light.

HOW TO CHARGE THE PORTABLE POWER STATION?

FOR MODEL KS 300PS
Charge by AC adaptor: Please connect our original adaptor to the household AC socket, connect the DC plug of standard charging adapter with the DC input interface of this  product, and you’ ll know the unit is charging when the battery icon lights up with the light twinkling at the same time. When the product is fully charged, the battery  icon will fully light. After the power station is fully charged, please remove the charger in time.

FOR MODELS KS 1200PS-FC, KS 2200PS-FC
Charging by DC input input (7.9х5.5х0.9mm)(12V~30V, 8A max/250W max):

and provide remaining charging time in hours under current input,and the percentage of the battery.

Charging by Anderson port 1 (18V~30V, 10A max/250W max): The icon will lights up, show the current input power in watts and provide remaining charging time in hours  under current input ,and the percentage of the battery.

Charging by Anderson port 2 (25V, 20A max / 500 ax for model KS 1200PS-FC, 25W, 40A max / 1000 W max for model KS 2200PS-FC) The icon will lights up, show the current input power in watts – and provide remaining charging time in hours under current input, and the percentage of

FREQUENTLY ASKED QUESTIONS

Can the product be carried on  the plane?

– No. According to international air transport standards, the lithium battery should not exceed 100Wh. You can not board the plane with the product because the built-in battery is 296Wh for model KS 300PS (1110Wh for model KS 1200PS- FC, 2220Wh for model KS 2200PS-FC).

Why the device sometimes power is not available within 300W for model KS 300PS(1200W for model KS 1200PS-FC, 2200W for model KS 2200PS-FC)?

– a. The power station’s power is less than 20%, and it needs to be charged in time.
– b.The instantaneous starting power of your equipment is larger than the peak power of the power station, or the nominal power of the equipment is larger than the actual power of our power station. It is recom­mended to choose our larger power products.

Why is there a sound when the product works?

– The power station built-in cooling fans system. The built-in fan can better help the product to dissipate heat to achieve a high conversion rate. It is common to have a slight noise during use.

Is the charger(adaptor) heating up normally while the product is charging?

– It is normal for the charger to heat up during charging. The standard charger conforms to national safety standards.

PRODUCT APPLICATION SKILLS

1. This product has high-quality built-in lithium-ion battery, which has no memory but high-capacity, and it is durable. However, we still recommend you to apply between  10C o~30C o , in order to obtain the optimal charging capacity.
2. When charging, in order to avoid interference, please keep it away from TV, radio and other devices.
3. If the device has not been used for a long time, please disconnect the cable and store it well.
4. Some portable devices may need to be set in charge mode to charge, see the corresponding equipment manual for more information.
5. After starting, if there is no any output, it displays to automatically shut down within 60 seconds, so as to achieve better energy-saving effect.
6. Please deal with scrap products in accordance with the regulations, do not treat the built-in battery as a household garbage, so as not to cause the explosion and  pollution.
7. Your device has and internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device.

WARRANTY SERVICE TERMS

• The international manufacturer warranty is 1 year. The warranty period starts from the date of purchase.
  In cases when warranty period is longer than 1 year according to local legislation please contact your local dealer. The Seller which sells the product is responsible for granting  the warranty. Please contact the Seller for warranty. Within the warranty period, if the product fails because of defects in the production process, it will be exchanged  on the same product or repaired.
  All faults caused by the manufacturer during the warranty period will be eliminated free of charge. Warran- ty repair is carried out only if you have a fully completed warranty  card, the Buyer’s signature of acceptance of the warranty terms, as well as a document supporting the purchase (cash receipt, sales slip or invoice). In the absence thereof, as  well as in the event of errors or corrections not authenticated by the seller’s seal or illegible inscriptions in the warranty card or tear-off coupon, no warranty repair is carried  out, no objections to quality are accepted and the warranty card is withdrawn by the service center as invalid. The device is accepted for repair clean and full.

• EC Declaration of Conformity Nr.126
  The following products have been tested by us with the listed standards and found in compliance with the European Community Machinery Directive 2006/42/EC,  Electromagnetic compatibility Directive (EMC) 2014/30/EC, Low Voltage Directive 2014/35/EC.

The statement is based on a single evaluation of above mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab. logo. The manufacturer should ensure that all product in series production are in conformity with the product sample deta lied in this report. The applicant should hold the whole technical report at disposal of the competent all the right.

Applied EC Directives:

2006/42/EC Machinery Directive
2014/35/EU Low Voltage
Directive 2011/65/EU (RoHS) as last amended by pirective (EU) 2017/2102

Applied Standards:
EN IEC 62368-1:2020+A11:2020
EN 55032:2015+A11:2020, EN 55035:2017+A 1 1 :2020
EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013+ A1:2019 EN 61000-4-2:2009, EN IEC 61000-4-3:2020,
EN 61000-4-4:2012, EN 61000-4-5:2014+A1:2017,
EN 61000-4-6:2014, EN 61000-4-8: 2010,
EN IEC 61000-4-11:2020
IEC 62321-4:2013& IEC 62321-4:2013+A1:2017&
IEC 62321-7-2:2017 & IEC 62321-6:2015 & IEC 62321-8:2017& IEC 62321-3-1:2013 & IEC 62321-7-1:2015

We DIMAX INTERNATIONAL GmbH hereby declare that specified above conforms covering European Parliament and Council Directives, 2014/35/EC Low Voltage Directive of 26 February 2014, Electromagnetic compatibility Directive (EMC) 2014/30/EC of 26 February 2014. The CE mark above can be used under the responsibility of manufacturer. After completion of an EC declaration of Conformity and compliance with all relevant EC directives.

Polska:
DIMAX International
Poland Sp.z o.o.
Polska, Warczawska,
306B 05-082 Stare Babice,
www.koenner-soehnen.com
info.pl@dimaxgroup.de

References

• Könner & Söhnen Stromerzeuger ᐉ Generatoren k&s | Könner & Söhnen Notstromaggregat und Gartentechnik
• Könner & Söhnen Stromerzeuger ᐉ Generatoren k&s | Könner & Söhnen Notstromaggregat und Gartentechnik
• Betriebsanleitungen und Kataloge | Könner & Söhnen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>