nVent 10380-027 Elexant Control Module Owner’s Manual
- June 15, 2024
- nVent
Table of Contents
nVent 10380-027 Elexant Control Module
nVent RAYCHEM ELEXANT 4020i-MOD is a set of replacement modules for the ELEXANT 4020i heat tracing controller.
FEATURES
- Available with intrinsically safe barrier and limiter.
- Simple to install
- Reliable during long life: 2-year product warranty available
SPECIFICATIONS
- Current Alarm: 0.1 – 100 A
- Autocycle: 1 – 750 h
- Ground Fault Alarm : 10 – 500 mA
- Ethernet: 10 /100 Base-T
- Max Power Supply Input Wire Size: 16.8 mm²
- Max Heating Cable Output Wire Size: 16.8 mm²
- Max Ground Terminal Wire Size: 16.8 mm²
- Control Max Current: 63A @ 40°C
- Voltage Alarm: 80 – 300 V
- Control Max Voltage: 690 VAC Nominal, 50/60Hz
- Relative Humidity: 0% to 90%, Noncondensating
- Control Relay Type : Double-Pole, Solid-State; Double-Pole, Mechanical
- Communication: RS-485; Ethernet
- Control Algorithms: On/Off, Proportional, PASC, Always On, Always Off
- Temperature Control Range: −200 to 700 °C
- Temperature Alarm: −200 to 700 °C
- Operating Temperature: −40 to 70 °C
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse,
misapplication, or other failure to completely follow nVent’s instructions and
warnings may cause product malfunction, property damage, serious bodily
injury, and death and/or void your warranty.
Our powerful portfolio of brands:nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
North America
- Tel +1.800.545.6258
- Fax +1.800.527.5703
- [email protected]
Europe, Middle East, Africa
- Tel +32.16.213.511
- Fax +32.16.213.604
- [email protected]
Asia Pacific
- Tel +86.21.2412.1688
- Fax +86.21.5426.3167
- [email protected]
Latin America
- Tel + 1.713.868.4800
- Fax +1.713.868.2333
- [email protected]
FAQ
Q: Where can I find the product instruction sheets?
A: The product instruction sheets are available at www.nvent.com or you can
contact your nVent customer service representative for assistance.
Q: What should I do if I encounter a ground fault alarm?
A: If you encounter a ground fault alarm, please check the wiring connections
and ensure that the ground terminal wire is properly installed. If the issue
persists, contact nVent customer service for further assistance.
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners. nVent reserves the right to change specifications
without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent