nVent RBWS1467E Horizontal Pouring Basin Instruction Manual
- June 15, 2024
- nVent
Table of Contents
nVent RBWS1467E Horizontal Pouring Basin
Product Information
Specifications
- Product Name: Horizontal Pouring Basin
- Type: Standard, Top Fill
- Catalog Number: RBWS1467E
- Material: Heat-resistant Graphite
- Diameter: 2.25 inches
- Length: 3.38 inches
- Width: 3.5 inches
- Height: 4 inches
- Unit Weight: 2.1 lb
Features:
- Made from heat-resistant graphite
- Durable, reusable, and long-lasting
- Designed for use with T-Series and B-Series horizontal top fill sleeves
Additional Product Details:
The RBWS1467 pouring basins require one RBW167 pouring basin frame (sold separately). Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
Warning:
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.
Product Usage Instructions
Step 1: Prepare the Structure
Ensure that the clearances of the structure allow for the installation of the standard horizontal pouring basin. Clear any obstructions or debris from the pouring area.
Step 2: Install the Pouring Basin Frame
Before installing the pouring basin, make sure to have the RBW167 pouring basin frame (sold separately). Follow the instructions provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual for proper installation of the pouring basin frame.
Step 3: Position the Pouring Basin
Place the RBWS1467 pouring basin onto the pouring basin frame. Ensure that it is securely positioned and aligned properly with the structure.
Step 4: Fill with Filler Material
Pour the desired filler material into the top fill opening of the pouring basin. Make sure to follow the recommended filling instructions provided by the manufacturer of the filler material.
Step 5: Clean and Maintain
After use, clean the pouring basin thoroughly to remove any residue or leftover filler material. Store it in a safe and dry place to ensure its longevity.
FAQ
Q: Can I use the RBWS1467 pouring basin without the RBW167 pouring basin frame?
A: No, the RBWS1467 pouring basin requires the RBW167 pouring basin frame for proper installation and support.
Q: Where can I find the nVent LENTON Cadweld Rebar Splicing System Instruction Manual?
A: The nVent LENTON Cadweld Rebar Splicing System Instruction Manual can be found with your product purchase or by contacting nVent customer service representative. It is important to read and understand all the instructions and safety notices before installation.
Q: Are there other sizes available for the pouring basin?
A: Yes, sizes not shown may be available by special order. Please contact your nVent LENTON representative for more information on different sizes.
CATALOG NUMBER
RBWS1467E
Standard horizontal pouring basins should be used whenever the clearances of the structure allow. The compact size of the standard pouring basins help ensure the best possible flow of filler material.
FEATURES
- Made from heat-resistant graphite
- Durable, re-usable and long lasting
- Designed for use with T-Series and B-Series horizontal top fill sleeves
PRODUCT ATTRIBUTES
- Material: Graphite
- Diameter: 2.25″
- Length: 3.38″
- Width: 3.5″
- Height: 4″
- Unit Weight: 2.1 lb
ADDITIONAL PRODUCT DETAILS
- RBWS1467 pouring basins require one RBW167 pouring basin frame (sold separately).
- Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
- Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries: +31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services
GmbH or its affiliates. All other trademarks are the property of their
respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>