nVent RBVA7570J Lenton Vertical Pouring Basin Instructions

June 15, 2024
nVent

nVent RBVA7570J Lenton Vertical Pouring Basin

Product Information

Specifications:

  • Catalog Number: RBVA7570J
  • Material: Graphite
  • Diameter: 3
  • Length 1: 7.5
  • Length 2: 1.5
  • Width: 3
  • Height 1: 7
  • Height 2: 3

Features:

  • Made from heat-resistant graphite
  • Durable, re-usable, and long-lasting
  • Designed for use with T-Series and B-Series vertical sleeves

Additional Product Details:

WARNING: nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.

Contact Information

  • Europe Netherlands: +31 800-0200135
  • France: +33 800 901 793
  • Europe Germany: 800 1890272
  • Other Countries: +31 13 5835404
  • APAC Shanghai: +86 21 2412 1618/19
  • Sydney: +61 2 9751 8500

Brands:

Our powerful portfolio of brands: nVent.com, CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, TRACER

Note: All trademarks and registered trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

Product Usage Instructions

Step 1: Preparing the Extended Vertical Pouring Basin

  1. Ensure that the interference of the structure is directly next to the tap hole in the sleeve.
  2. Clean the pouring basin with a soft cloth to remove any dirt or debris.
  3. Inspect the pouring basin for any signs of damage or wear. Do not use if damaged.

Step 2: Installing the Extended Vertical Pouring Basin

  1. Place the extended vertical pouring basin on a stable surface.
  2. Align the tap hole in the sleeve with the opening of the pouring basin.
  3. Gently insert the sleeve into the pouring basin until it is securely fitted.

Step 3: Using the Extended Vertical Pouring Basin

Note: Follow all safety guidelines and precautions while using the product.

  1. Pour the desired liquid or material into the pouring basin through the tap hole.
  2. Ensure that the pouring basin is level to prevent spills or leaks.
  3. Monitor the flow of liquid or material and adjust as necessary.
  4. After use, clean the pouring basin thoroughly and store it in a safe place.

Frequently Asked Questions (FAQ)

Q: Can I use the extended vertical pouring basin with other vertical sleeves?

A: No, the extended vertical pouring basin is specifically designed for use with T-Series and B-Series vertical sleeves.

Q: How do I clean the pouring basin?

A: Use a soft cloth to clean the pouring basin and remove any dirt or debris. Avoid using abrasive cleaners or materials that may damage the graphite material.

Q: What should I do if I notice any damage or wear on the pouring basin?

A: Do not use the pouring basin if you notice any signs of damage or wear. Contact nVent customer service for assistance and possible replacement.

Extended vertical pouring basins are used when interferences of the structure are directly next to the tap hole in the sleeve.

FEATURES

  • Made from heat-resistant graphite
  • Durable, re-usable and long lasting
  • Designed for use with T-Series and B-Series vertical sleeves

PRODUCT ATTRIBUTES

  • Material: Graphite
  • Diameter: 3″
  • Length 1: 7.5″
  • Length 2: 1.5″
  • Width: 3″
  • Height 1: 7″
  • Height 2: 3″

ADDITIONAL PRODUCT DETAILS

RBVA pouring basins require one RBM2660DC pouring basin frame and one RBS5000 bolt retainer. RBVB pouring basins require one RBM2660TC pouring basin frame and one RBS5000 bolt retainer (all sold separately).
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support

Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793

Europe Germany:
800 1890272 Other Countries:+31 13 5835404

APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500

Our powerful portfolio of brands:

nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals