CaRSun T2500-2 Cordless Tire Inflator Portable Air Compressor User Manual
- June 15, 2024
- CaRSun
Table of Contents
- SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- PARTS LIST
- TOUCH SCREEN INTRODUCTION
- BATTERY INDICATOR & CHARGING &power Bank
- EMERGENCY CHARGING & Measure pressure value
- USING STEPS
- Determining the right pressure value
- Product recommended pressure value
- SPECIFICATIONS
- Types of failures and treatment methods
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
T2500-2
CORDLESS
TIRE INFLATOR
USER MANUAL A1.2
※ Please read user manual before using your product and keep it for future reference.
SAFETY INSTRUCTIONS
- Please read the instructions carefully before use.Incorrect usage may damage the product.
- Please pay attention to electricity safety when using.
- Ensure the remaining battery of the rechargeable battery can fulfill objects.
- Check the preset pressure value before use. The preset pressure value should match the object to be inflated.
- Please do not use this product in the rain or where there are any liquids.
- Contains small accessories which are a choking hazard for young children. Keep out of reach of children, if there are children nearby make sure they are properly supervised.
- Keep the device away from fire,corrosive gases,liquids,and strong magnetic fields.
- Do not aim the nozzle at people or any part of a human body.
- Risk of electric shock, do not use air compressor if it is damaged or if the wires are exposed.
- Avoid extended and continuous use. Please use less than 20 minutes for a single use.
- Do not store the air compressor in high-temperatures or in a humid environment.
- Suitable for vehicles, cars, RVs, Pickup trucks , motorcycles, bicycles, decorative balloons and other objects that need to be inflated, etc.
- During use, do not touch any parts of the air compressor apart from the switch . The air compressor gets hot during use and stays hot for some time after. Do not use chemical reagents to clean the air compressor.
- The air pump should be used in a clean, dry, well-ventilated place,please keep the air compressor away from fire,heat,and corrosive liquid.
- The air pump should be charged in time after discharge, avoid keeping the product out of power for a long time, which may cause the product to be unusable. In addition, please use the original charging equipment.
- To avoid damage,please do not charge your electronic devices when the air compressor is pumping.
PRODUCT OVERVIEW
1: Hidden handle
2: LED Light
3: Power button
4: Type-C input| 5: DC 12V cigarette lighter power cord interfac
6: USB output
7: Touch screen
8: Air tube
---|---
PARTS LIST
TOUCH SCREEN INTRODUCTION
: Suitable for balls;
:Suitable for bicycles;
: Suitable for motorcycles;
: Suitable for cars, SUVs, RVs, Pickup trucks;
: (custom modes )You can set the pressure value you want by pressing the +/-
button according to your own needs;
: The light is on to indicate that the current is being output;
: When the 12V cigarette lighter power cord is powered, the light will light
up;
: Press once to switch inflation mode, Long press the’ ‘ button to switch units
(4 options: PSI BAR KPA kg/cm²)
: Suspend work / Start to work;
: Press it once to turn on the white light, press it again to flash the red
light, and press it again to flash the white light;
BATTERY INDICATOR & CHARGING &power Bank
Battery indicator
: Blinking means that the battery is about to run out and needs to be charged
in time;
: The battery light is always on means the battery is fully charged
2 charging methods &power Bank
- :Supply power to the air pump through the original TYPE-C line;
- : Supply power to the air pump through the 12V cigarette lighter power cord;
It can be used as a 5V/2A power bank to charge a mobile phone or a tablet without starting the air pump.
EMERGENCY CHARGING & Measure pressure value
Emergency charging
When the air pump is out of power, it can be powered through the 12V cigarette
plug interface on the car, so that it can be charged while inflating.
Measure pressure value
After turn on the air pump, make sure the air nozzle is connected the ball/
bicycle/motorcycle/car, the LED display will detect the current pressure
value.
USING STEPS
- :Connect the air pump firmly to the air outlet of the inflatable object;
- : Press to turn on;
- : Press to choose the mode you need( ),Long press the button to switch units (4 options: PSI BAR KPA kg/cm²), after waiting for 3 second, press to start, (The pressure value has been preset, this data is the reference pressure value, if it is not what you want, you can adjust it by pressing the +/- button);
- : When the pressure value you need is reached, the air pump will stop working automatically, you can press to ****turn off the air pump;
Determining the right pressure value
The tires
of automobiles, bicycles and motorcycles can withstand the pressure range The
enclosure is marked on the sidewall of the tire. Guide pressure gauge for
automobile tires Note: near the inner wall of the driver’s door. In flation
pressure It is related to the load weight.
For more detailed air pressure suggestions, please check Read the vehicle
manual. The inflation pressure of football, basketball, volleyball and other
balls is at the air nozzle Inflation pressure shall be marked around.
Product recommended pressure value
Inflation pressure value
Bike| 12,14,16 inch bicycle tire| 30-50psi
20, 22, 24 inch bicycle tire| 40-50psi
26,27.5,29 inch mountain bike tire| 45-65psi
700c road bike open tire| 100-130psi
700c road bike tube| 120-145psi
Motorbike| Motorcycle, electric motorbike tire| 26-45psi
Car| Sedan car tire| 26-50psi
Balls| Volleyball| 4-5psi
Basketball| 7-9psi
Rugby| 12-14psi
Football| 8-16psi
The recommended inflation pressure is for reference only. please refer to the requirements of the instruction manual of the inflated product.
SPECIFICATIONS
Name | Cordless Air Inflator |
---|---|
Model | T2500-2 |
DC 12V cigarette lighter power cord Dimensions | Length 350CM |
Inflation Pressure Range | 3-150 psi / 0.2-10.3bar |
Operating Temperature | Charging :0 ℃~60 ℃, Discharging :-20~60 ℃ |
Storage Temperature | -20 ℃~60 ℃ |
Battery Capacity | 2600mAh *4 |
Working Noise | Lower than 88dB within 1 meter |
Output | 5V/2A |
Input Port | Type-C / DC 12V |
Output Port | USB |
Charging Time | 6-8hours |
Sensor Accuracy | ±2psi |
Types of failures and treatment methods
Malfunction | Method of exclusion |
---|---|
Slow inflation | 1. Check whether the air pipe is leaking. |
2. Check whether the inflated object is leaking.
3. Check whether the car is full of heavy objects. If so, please use a jack
to jack up the car before inflating it.
4. Check whether the connections at both ends of the trachea are tight.
5. Whether the battery is sufficient.
Can’t inflate after turning on| 1. Check whether the air pipe is connected in
place.
2. Check whether the battery is sufficient.
3. Check whether the current tire pressure value is higher than the preset
value.
Cannot adjust preset pressure| Check whether it is in the incorrect inflation
mode, select the free mode to adjust the preset value within the range of
3-150psi.
Normal inflation but the pressure shows zero| Low-pressure inflation products
such as balloons are not within the measurable range of the device.
The product automatically shuts down| Long press the power button to turn it
on again.
Battery power after charging The icon is not lit| Replace the safety compliant
adapter and original charging line Charge.
Battery in charge state Electricity icon shows electri city Volume and standby
mode atypism| Replace the safety compliant adapter and original charging line
Charge.
Unable to provide other devices charge| 1. Check whether the power is
sufficient.
2. The output parameter is 5V/2A, please confirm whether the charged device is
Applicable.
3. It cannot be used as a mobile power supply in the inflation state.
4. Please use the original charging cable of the charged device.
Other than the above,No reaction in operation| Long press the ON key to turn
off the machine and turn it on again.
WARRANTY
Activate your warranty
You will receive free 48 months warranty, after you scan below QR code with
providing your Amazon order ID.
If you experience any questions or concerns with our product, please let us
know. CARSUN always wants to provide customers with excellent products as well
as customer service.
We’re happy to help. Please contact us
after-sales@carsun.com
www.carsun-warranty.com
http://www.carsunwarranty.comscan=1
If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.
http://www.carsun-warranty.comscan=1
Email: after-sales@carsun.com
WEB:www.carsun-warranty.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>