SHARPER IMAGE AS-EM002 Eye Care Wand Massager User Manual

June 4, 2024
Sharper Image

SHARPER IMAGE AS-EM002 Eye Care Wand Massager

SHARPER IMAGE AS-EM002 Eye Care Wand Massager

Thank you for choosing this product
Please read this instruction carefully before use.
Please keep it properly for future reference

Product parameters

Model Name| AS-EM002 Eye care wand massager| Fuselage High quality material ABS + Silica gel+ Aluminum alloy Product 288X86X50mm size
---|---|---
Product code| 6971752570056| Charging interface| Type-C
Rated voltage| 3.7V| Battery capacity| 2500mAh
Product color| Rose gold| G,W,| 0.33kg
Massage time| Stop the mcisscige automciticcilly after 20min each time| Charging time| About 3 hours
Massage mode| 6 types| Temperature of Ice/hot compress| Each mode has 3 gears of temperature
Product function| Ice compress revitalization,Warm feeling hot compress,Slight vibration massage, High-frequency vibration massage
Executive standard| GB4706.l-2005 GB4706.10-2008

Note: the product pictures shown in this manual and the description of the relevant product features, Explanation of some nouns, Can only serve as a reference. please make the object as the standard when use.
In view of the consistent policy of continuous improve­ment for products, The company reserves the right to change product specifications, Physical goods are subject to shipment.

Daily maintenance

  1. When cleaning and maintaining this product, please turn off the host and clean with wet wipes, when it is very dirty, a little alcohol (75% alcohol concentration) can be used for wiping disinfection.
  2. Please use neutral detergent and soft cloth for daily maintenance. Do not use corrosive detergent, do not put it into water for soaking or rinse.
  3. During the cleaning process, water or other liquids should be prevented from entering the body to avoid short circuit and electric shock during use.
  4. When an accident occurs, professional technicians should be invited to repair, non-professional person­nel, please not self-assembly device.

Product Schematic diagram

SHARPER IMAGE AS-EM002 Eye Care Wand Massager 1

Preparation before use and charging

Charging

  1. When the power of the main engine is insufficient, the blue light on the power indicator on the brick of the main engine flashes and needs to be charged.
  2. Please use the charger with USB output 5V/1A/2A when charging. (Charger self-provided)
  3. Using the type-c line configured by our company, Insert host cit one end, cind insert the charger into the other end;
  4. The power indicator flashes a red light when charging.
  5. The blue light of the power indicator is long and bright when the power is full.

Tips

  1. During the charging process, the product cannot be started up for working. If the product is charged during working, the product will stop working automatically.
  2. When the product is started up and running 20 minutes, sleep protection time gate is set. If you need to continue using it, wake it up again and use it as needed.
  3. This product should be stored in a dry and ventilated place after use.
  4. Do not place other weights on the product.
  5. When all functions of the whole machine are turned on and the power is full. the product can be used for 60~90 minutes continuously, Product is dormant for 20 ‘ minutes, need to wake up again each time.

Preparation before use

  1. When cold and hot compress to the eyes, Holding the massage stick, put the care head of cold cind hot temperature control to eyes.
  2. When massaging eyes: hold the massage stick in hand, put the silicone nursing head on the eye/Eye bags, and move the massage stick frequently in order to massage cill the positions of the eyes.
  3. When massaging the rest of the body: hold the massage stick, put the head of the massager to the positions need to be massaged.

Tips
When use this product for massaging, Please remove eye accessories to avoid discomfort occurring when use. Please do not fall down and trample on this product.

Gesture diagram

SHARPER IMAGE AS-EM002 Eye Care Wand Massager 2

Tips
When Undercooling / overheating, Please adjust yourself to feel comfortable about joint tightness.

Operation

  1. Press the switch button “@ “of the host.
  2. Turn on the host , the Indicator light is bright for long time, host start working, Open massage mode of high frequen­cy vibration by default, massage mode is low-speed mode.The working time is 20 minutes. If you want to continue using it after 20 minutes, please open it again.

Adjusting product

  1. After turn on the host, Find the module of pattern selection on the front of the product, Press the function of massage you need. such as press but­ton,the massage mode is opened, Continue to press the”button, switch the massage mode, mode c.in be switched by circle, The six modes are: low-speed mode, medium speed mode, high-speed mode, Progressive mode, wave mode cind intermittent mode.
  2. Press button, Open ice compress mode Default mode is one gear, then press button, temperature decreases to the second gear , press the third times button, temperature decreases to the third gear , press the fourth time button, temperature back to the first gear, ice compress contains three gears, temperature ccin be switched by circle.
  3. Press”button , Open hot compress mode , Default mode is one gear , then press button, temperature heat to the second gear, press the third times button, temperature heat to the third gear, press the fourth time button, temperature back to the first gear, hot compress contains three gears, temperci­ture can be switched by circle.
  4. Press button long time , The care head of silicone of massage granule design( Under the button module) Micro motor start, Open micro-massage mode,lt can be used to massage the eyes and other parts that ccinnot be affected by gravity.

TIPS
Press button, Massage mode will stop , press button ,The mode of ice compress and hot compress will stop

Close the product
When product working, press the power button START Gently, hots shut down.

Precautions

Before using this product, Please make sure read it carefully and follow the instructions, The company is not responsible for the consequences caused by incorrect use or non-compliance with the relevant instructions of the product.

  1. Do not use this product when charging.
  2. Please don’t use it for children or people who have no expressiveness, otherwise it may cause an accident or cause discomfort.
  3. The product has a surface heating function, Please note for users who are not sensitive to heat For adults. disabled people and elderly need to be used under adult guardianship.
  4. Sensitive skin, allergic dermatitis, The parts of the body have integral material, metal material and such special groups, Please use it under the doctor’s instruction.
  5. Don·t self-disassembly, Wash this product, it contains a lithium battery. Don’t self-disassembly, modify,­flood the product, or throw it into fire, otherwise it may result in product image cind explosion.
  6. This product is personal health massage product, can not replace medicine or medical instrument.
  7. It is invisible to use it continuously for 20-30 minutes each time.
  8. In case of any abnormality or malfunction in use, please stop using immediately.
  9. The product is recommended for use by one user. When it’s used by different users, please clean the product before using.
  10. In the following cases, consult your doctor before use, otherwise it may cause accidents or cause physical discomfort.
  11. Patients under medical treatment and feel discom­fort.
  12. Patients whose body temperature exceeds 38 degrees( fever period).
  13. Patients with infectious diseases.
  14. Patients with skin perceptual disorders or skin abnormalities.
  15. Patients who are not free to express their wishes
  16. Usage under the following conditions is prohibited:
  17. Malignant tumor patient.
  18. Patient with bleeding tendency.
  19. Pregnant women, lying-in women
  20. Don’t use for purposes other than the ones described in the instruction manual, Otherwise, accident or malfunction may occur.
  21. Don’t use the product with a chipped or damaged surface. Otherwise, accidents or m.ilfunctions may occur.
  22. Don’t disassemble, repair or modify this product without authorization. Otherwise, malfunction or electric shock may occur.
  23. If your body or skin feel strange, consult your doctor and follow the doctor’s advice.
  24. If you want to move the product to other people during massage, be sure to turn off the power before moving it.
  25. lf abnormal operation occurs, immediately switch off the power supply and remove it. Otherwise, high temperatures or short circuits may occur and lead to an accident. At the same time contact customer service for after-scale advice.
  26. Don’t plug or unplug the USB charging cable with wet hands. Doing so may result in electric shock or accident.
  27. Don’t use while driving ci CM, otherwise it may cciuse physical discomfort due to excessive stimulation, resulting in an accident.
  28. Don’t apply the product on the same place for long time (more than 30 minutes), otherwise it may cause muscle fatigue at the massage site to cause physical discomfort.
  29. When unplugging the USB charging cable from the fuselage, do not pull the wire, but hold the plug and pull it out. Otherwise, it mciy cause electric shock or product damage.
  30. When the product is working for a long time, the surface will be hot, which is normal.

Note

  1. Please make sure that the host button is working properly.
  2. When you use it for the first time, or if the battery loses power after the product has been left idle for a long time, please perform the charging operation according to the instruction manual to ensure that it can work normally,
  3. When disposing of this product, please dispose of it in accordance with the relevant environmental protection regulations of the city, otherwise it may cause environmental pollution.
  4. It is recommended for people aged 16 and above.

Troubleshooting

In case of any malfunction during operation, please check it. If the obstacle cannot be excluded or the product is still not operated ideally, please cut off the power.

1 Problems Possible cause Treatment
2 Automatic shut down after starting up The battery is running low Please

charge it

3

| The hot compress temperature is

not high

| The battery is running low| Please charge it
4| The ice compress temperature is not low| The battery is running low| Please charge it
 | | USB socket with poor contact /power with poor contact| Pull and plug in a USB charging cable/the power cord
The charging
indicator, couldn’t shining

Do not repair and disassemble the product without permission, If so cause product damage , Personnel injury or any other losses.The company is not responsible.

Precaution of scrapped product

Please support the recycling use of the rechargeable battery (lithium-ion battery ).

Danger| The battery used for this product is a professional rechargeable battery.
Don’t use it for other products.
Don’t change the battery that ;, cilrecidy removed.

• Please don’t throw it into fire and over it

•Please don’t pierce it with nail, impact it or decompose and reconstruct it.

• Please don’t connect the positive and negative poles of the battery directly with the metal.

•Please don’t store it with the necklace, or hairpin together.

---|---
 | •Please don’t charge, use and place it near the fire, under the sun and other places of high temperature.

The above circumstances can cause fever, fire, and rupture.

Warning| Please place the removed rechargeable battery out of the reach of infants to prevent being swallowed.

WARNING

  • If it’s swallowed by accident, please see a doctor
  • When the battery liquid leaks, please do not touch the liquid with bare hands, and handle it with following method.
  • There is a risk of blindness when battery fluid enters the eye. Please do not rub your eyes directly with your hands. Wash with clean water immediately and see a doctor. Battery fluid may cause skin irritation or injury when it gets on your body or clothing. Please rinse with water, see a doctor immediately if you still feel unwell.
  • Only the product ccin be decomposed when it is scrapped. Failure to comply may lead to fire, electric shock, injury and other accidents. If need to repair (except battery replacement), Please consult the store where you bought this product cit the beginning,

The lithium-ion battery used in this product is a renewable and valuable resource. Please remove the lithium-ion battery when it is discarded after use, Transfer to a professional organiza­tion for rechargeable battery recycling and reprocessing.

After-sales and warranty

Storage
More than 3 months, the m.ichine should be checked cind recharged before use.Do not cling to floor, wall or roof, Indoor should be well-ventilated to avoid strong sunlight and erosion of corrosive gas .

Transport
The product is equipped with simple anti-vibration facilities, suitable for aviation, railway, highway and shipping transport, should avoid rain, snow splash, inversion and collision.

Power inspection
Check the power, If the power voltage exceeds the specified range of the instrument, it shall not be turned on for use.

Maintenance
Measures should be taken to prevent moisture, circuit and anti-pollution. Cleaning should be 1n the state of shutdown. Users should put the instrument in a safe place. Do not put heavy objects on the instrument. In case of failure, professional and technical personnel should be called for repair, non-professional personnel do not to disassemble and install the instrument.

Commitment
If the performance of the product have trouble since it’s sold from the city, You can handle return/replacement in the original purchase platform depend on the product warranty card or invoice within 7 days, Please ensure that the product is not damaged by external force when returning/replacing, make sure that the external packaging, user manual and other accessories is intact, and does not affect the secondary sales.

WARRANTY

  1. Within one year from the date of purchase, You can enjoy the service of free parts replacement and repair depend on valid warranty card or invoice. (the replacement of the product shell and electrode is not covered by the warranty, The company promises to provide free maintenance, including the cost of maintenance and materials, but the transportation costs is not included. Meanwhile, Our company doesn’t provide on-site maintenance service).
  2. Due to the improper use of customers, such is providing the wrong voltage, causing accidents, domicile or breakdown caused by the repairman’s repair the products without our company’s .:iuthorizcition is not covered by the warranty.
  3. The company will change corresponding fees for any additional services or transportation services beyond the standard warranty.
  4. Damage caused by improper use, storage and maintenance by customers; and disassembly by maintenance personnel not authorized by our company, No warranty card or invoice; Damage caused by force majeure.
    Our company can provide maintenance services, but it needs to charge corresponding parts and transportation costs,

Note: the company reserves the right to cement the terms and conditions due to the service upgrade constantly, without prior notice.

Effective warranty

  1. The end user must fill in the customer information in order to provide effective after-sales service for you.
  2. The maintenance protection depends on the warranty card and its product serial number, Please check the warranty card when you purchase Whether the item to be filled in is completely true and whether the sericil number of the product is complete, Please call our after-sales service hotline if you have any questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Sharper Image User Manuals

Related Manuals