Sony SRSXG500 X-Series Wireless Portable Bluetooth User Guide
- June 4, 2024
- Sony
Table of Contents
- Sony
- Sony SRSXG500 X-Series Wireless Portable Bluetooth
- Specifications
- Introduction
- RECYCLING RECHARGEABLE BATTERIES
- Precautions
- About the Voice Guidance
- How to care for the unit
- Compatible iPhone/iPod models
- Frequently Asked Questions
- Video
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Sony
Sony SRSXG500 X-Series Wireless Portable Bluetooth
Specifications
- DIMENSIONS: 11 x 10.07 x 8.46 inches
- WEIGHT: 3 pounds
- WOOFER UNIT : Approx. 110 mm × 110 mm (4 in × 4 in) (2)
- TWEETER UNIT : 25 mm (1 in) dia. (2)
- BLUETOOTH SPECIFICATION version 5.0
- MAXIMUM COMMUNICATION RANGE : Line of sight*1 approx. 30 m (98 ft.)
- FREQUENCY BAND: 4 GHz band (2.4000 GHz – 2.4835 GHz)
- MODULATION METHOD: FHSS (Freq. Hopping Spread Spectrum)
Introduction
The tough SRS-XG500 Wireless Speaker allows you to bring powerful party sound wherever you go. Battery life of up to 30 hours and IP66 water and dust protection ensure that the music never stops. Play your favorite music through X-Balanced speakers for clear, crisp sound, and set the mood with the soft glow of the LED ring lighting.
CAUTION
Do not install the appliance in a confined space, such as a bookcase or built- in cabinet.
As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Do not subject the batteries to extreme low temperature conditions that may result in overheating and thermal runaway. Do not dismantle, open or shred secondary cells or batteries. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Do not use any charger other than that specifically provided for use with the equipment. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Dispose of properly.
RECYCLING RECHARGEABLE BATTERIES
Rechargeable batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, visit https://www.sony.com/electronics/eco/environmental- management Caution: Do not handle damaged or leaking rechargeable batteries. Do not place this product close to medical devices This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
For customers in the USA
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Precautions
On safety
- Important information such as the model name is located as follows:
- On the inner surface of the cap on the rear side of the unit
- On the surface of the AC adaptor
On the AC adaptor
Use only the supplied AC adaptor. To avoid damaging the unit, do not use any other AC adaptor.
On placement
- To eliminate the risk of malfunctions, avoid the following locations when placing or leaving this unit.
- A place subject to high temperatures, such as under direct sunlight or lighting equipment, near a heat source, or in a sauna
- Inside a vehicle with the windows closed (especially in summertime)
- A place subject to excessive dust
- A place subject to strong vibration
- Place this unit on a flat, level surface. When placed on a sloped surface, the unit may fall over or fall off the surface due to its own vibration, resulting in injuries, malfunctions, or performance degradation.
- Depending on the conditions where this unit is placed, it may fall over or fall off the surface. Do not leave any valuables near the unit.
- This unit is not anti-magnetic. Keep objects susceptible to magnetism (recorded tapes, watches, cash cards and credit cards with magnetic coding, etc.) away from the unit. When you carry around the unit, keep this in mind as well.
- Others
- If you use this unit for a long time, the temperature of this unit may rise, but it is not a malfunction.
- Do not use or leave the unit in an extremely cold or hot environment (temperature outside the range of 5 °C – 35 °C (41 °F – 95 °F)). If the unit is used or left in outside the above range, the unit may automatically stop to protect internal circuitry.
- At high temperature, the charging may stop or the volume may reduce to protect the battery.
- Even if you do not intend to use the unit for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.
About the Voice Guidance
IMPORTANT: THE SOUND GUIDANCE IS AVAILABLE IN THIS PRODUCT ONLY IN ENGLISH Depending on the status of the unit, the voice guidance outputs from the unit as followings.
- When entering pairing mode: “BLUETOOTH pairing”
- When establishing a BLUETOOTH connection: “BLUETOOTH connected”
- When disconnecting a BLUETOOTH connection: “BLUETOOTH disconnected”
- When pressing the BATTERY button to check the battery power during the unit is turned on: “Battery fully charged/Battery about 90%/Battery Care mode, Fully charged, Battery about 90%/Battery about 80%/Battery about 70%/Battery about 60%/Battery about 50%/Battery about 40%/Battery about 30%/Battery about 20%/Please charge”
- When the remaining power of the rechargeable battery falls below 10% while the unit is powered: ”Please Charge”
- When pressing and holding the BATTERY button to change the charge mode while the unit is powered: ”Battery Care mode, ON/Battery Care mode, OFF”
- When a Stereo Pair connection is established by the application (Sony | Music Center): “Left/Right”
On Copyrights
- Android, Google Play and other related marks and logos are trademarks of Google LLC.
- LDAC™ and LDAC logo are trademarks of Sony Corporation.
- Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
- This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
- The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
- Apple, the Apple logo, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
- App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
- Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
- Other trademarks and trade names are those of their respective owners.
- ™ and ® marks are omitted in the documents.
Notes on water resistant and dustproof features (Read before using the unit)
Water resistant and dustproof performance of the unit
The unit, with the cap closed securely, has a water resistant specification of IPX61 as specified in “Degree of protection against jets of water” of the IEC60529 “Ingress Protection Rating (IP Code)”3, and a dustproof specification of IP6X2 as specified in “Degree of protection against solid foreign objects”3.
Liquids that the water resistant performance specifications apply to
- IPX6 (Degree of protection against jets of water): For details, refer to the Help Guide.
- IP6X (Degree of protection against dust): For details, refer to the Help Guide.
- The supplied accessories and the connectors of this unit (DC IN/USB/AUDIO IN/MIC/GUITAR) are neither water resistant nor dustproof. To reduce the risk of fires or electric shocks, do not expose the unit to water or droplets while using any connectors (DC IN/USB/AUDIO IN/MIC/GUITAR). Do not place a vase or any other liquid-filled container on the unit.
- The water resistant and dustproof performance of the unit is based on our measurements under the conditions herein described. Note that malfunctions as a result of water immersion or dust intrusion caused by misuse by the customer are not covered by the warranty.
To avoid deterioration of water resistant and dustproof performance
Check the following and use the unit correctly.
- This unit does not have a design that is resistant to water pressure. Do not put the unit in the water to avoid a malfunction.
- Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the unit directly. Also never use the unit in a place subject to high temperatures, such as in a sauna or near a heat source.
- Handle the cap with care. The cap plays a very important role in maintenance of the water resistant and dustproof performance. When using the unit, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the water resistant and dustproof performance may deteriorate and may cause a malfunction of the unit as a result of water or dust particles entering the unit.
How to care for the unit
Although the fabric part of the unit has water repellent treatment applied, you can use the unit more comfortably and for a longer period of time by following the maintenance procedure below.
- If the surface of the unit gets dirty in the following cases, wash the unit with fresh water (tap water, etc.) promptly to remove the dirt. Leaving dirt on its surface may cause the fabric part or the passive radiator section to discolor or deteriorate, or the unit to malfunction. Ex.
- When the unit has sand, salt (chlorine), or other residue on it after having been used in a mountain area, by a swimming pool, etc.
- When the unit is stained with foreign substances (sunscreen, suntan oil, etc.)
- If the unit gets wet, wipe off the moisture using a dry soft cloth immediately. In addition, dry the unit in an airy place until no moisture remains.
- The sound quality may change when water enters the speaker section of the unit. This, however does not indicate a malfunction. Wipe off the moisture on its surface, and put the unit on a dry soft cloth to drain the collected water inside the unit. Then, dry the unit in an airy place until no moisture remains.
Note
- If the surface of the unit gets dirty, do not use detergent, thinner, benzine, alcohol, etc. to clean the unit because it will affect the water repellent function of the fabric part of the unit.
- Especially in cold regions, be sure to wipe off the moisture after using the unit. Leaving moisture on its surface may cause the unit to freeze and malfunction.
- If sand grains, etc. enter the fabric or other part of the unit, remove them carefully. Never use a vacuum cleaner, etc. on the unit. It may cause damage of the speaker section or other part of the unit.
Compatible iPhone/iPod models
iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPod touch (7th generation) The unit is compatible with iOS 10.0 or later. Design and specifications are subject to change without notice.
Frequently Asked Questions
Does it have aux port?
Yes.
What is the actual weight?
18 lbs.
Does the speaker come with a charger?
Yes.
Does it come with mounting hardware if you want to secure it to a shelf for example?
No, it doesn’t.
What type of USB port does it charge with?
It doesn’t charge with a USB port.
Is there a carrying case for this item?
No.
Does it have a mic so you can take a phone call?
No.
What is the Bluetooth version?
The version of Bluetooth is 5.0.
What’s the wattage output?
30 watts.
Will this work with Chromecast?
This doesn’t support Chromecast.
Could this speaker also be used as a sound bar for television?
Yes.
Can the lights follow the beat?
Yes.
Can you rewind with this speaker?
Yes, you can.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>