Carepeutic KH-301 Leg Spa Bath Massager Instruction Manual
- June 15, 2024
- Carepeutic
Table of Contents
Carepeutic KH-301 Leg Spa Bath Massager
This user manual provides both operation information and specifications of this product. Read this manual and understand it thoroughly before use.
READ AND SAVE IMPORTANT SAFETY INSTRUCTION
- Read the following safety information carefully before using this product. If you have any of the following medical conditions, we advise you to consult with your doctor before use. • Suffering from a heart condition
- Having a sensory disorder or pacemaker
- Suffering from osteoporosis or diabetes
- Pregnant
- Having a malignant tumor
- Undergoing medical treatment
- Physically disabled
- Suffering from acute diseases
- Osteoporosis, vertebral fracture, muscle or skin disease.
- Having gout, arthritis, joint deformation.
- Skin disease and allergic dermatitis
- Having neurological disorder or perceptual disorder on skin
- Having fractured or plastic surgery materials inside your knee, joint, legs, or feet
- Unable to feel normal temperature
SAFETY NOTE:
- Attention: Never try to turn on the power or operate this product without having water inside the water container.
- Attention: This product is designed for private use, not intended for medical or commercial purposes. Children should be supervised to ensure that they do not use this product as a toy.
CAUTION :
- Never try to turn on the power or operate this product without having water inside the water container.
- Do not immerse the product in water for cleaning.
- Do not stand up on this product or stand up inside its water container. Use it only when you are seated on a chair or sofa.
- Do not try to touch the control panel and plug or unplug the power adaptor with wet hands.
- Do not use the product if you are hungry, right after a meal, drunk, or right after extreme exercise.
- Do not use the product if you have a wound or are after surgery and not yet fully recovered on legs or feet.
- Do not use this product continuously for more than 60 minutes at a time. The product has a default working time of 30 minutes. It’ll automatically turn off when the time is up. It is recommended that you should take 10 to 15 minutes of break for every 60 minutes of use.
- Do not use this product while you are sleeping, and avoid falling asleep while the product is in use.
- Always unplug the product from the power outlet after use. Never leave this product unattended while its power is connected.
- Never use the product close to the heater, fireplace, stove or other heat source.
- Always escort and pay attention while children, patients, disabled and elderly people are using this product. This product is not for children under age 18.
- Never use the product if the plug/wire/product is damaged, if it is not in smooth operation as it should be, or if it is immersed in water.
- People with heart disease or are prohibited from exercise should not use this product unless you have consulted with your doctor.
- People with skin allergies, wounded or after surgery, and not well recovered should not use this product unless they have consulted with their doctor.
- Unauthorized person is not allowed to reconstruct or replace the component of this product.
- Do not use this product in a sauna room or bathroom, or in area that has high humidity or wet floor.
- Close supervision is necessary when this product is used by, close or next to children, invalids, or disabled persons.
- Never let children, mentally retarded and people with difficulty in action to operate this product and to reach the power source.
- If the product has not been used for a long time, check it before use again.
- Excessive use can lead to overheating and shorter product life. Should this occur, turn off and unplug the power, and allow the product to cool down before use again.
- Do not use this product as a substitute for medical treatment.
- This product is designed for household use only.
MEDICAL NOTES:
- To avoid excessive stimulation of the skin, the massage time should not exceed the recommended 60 minutes at a time (its default time is 30 minutes).
- If you are under medical treatment and your doctor or orthopedist does not particularly forbid foot spa massage, you can enjoy the massage following your doctor’s instruction.
- A massage should never feel unpleasant. Should pain or discomfort result, discontinue use and consult with your doctor.
- Excessive massage can also harm to body.
- People who are unable to feel normal temperature, ill persons undergoing medical treatment, and children should not use this product. Foot spa massage could be dangerous to people with wound or injuries on legs or feet. If in doubt, talk to your doctor in advance.
WARNINGS
WARNING 一 TO REDUCE RISK OF BURN, FIRE, ELECTRIC SHOCK, OR INJURY TO USERS:
- This product should never be left unattended when it is plugged in. Unplug it from the outlet when it’s not in use.
- Close supervision is necessary when this product is used by or close to children, invalids, or disabled persons. THIS PRODUCT IS NOT A TOY.
- Use this product only for its intended use as described in this manual.
- Never operate this product if it has a damaged power cord or plug if it is not working properly if it has been dropped or damaged on the case or immersed in water. Return the product to a service center for examination and repair. Never try to take apart or repair this product by yourself.
- Do not carry this product with its power cord or use the power cord as a handle.
- Turn off the product on the control panel before removing the plug from the outlet.
- Use only the original adaptor that comes with the product.
- To avoid possibly dropping electronic products into water containers, it is recommended not to use any electronic devices while using this foot spa massager.
- Keep the power cord away from heat or wet sources.
- Always unplug the power cord from the electrical outlet after using and before cleaning.
- Do not use attachments that are not recommended by the manufacturer for this product.
NOTICE: this product should not be used in the following circumstances:
- Massage should be comfortable and pleasant. Should pain or discomfort result, discontinue use and consult with your doctor.
- Avoid the use of an extension cord because the extension cord may lead to overheating and risk of fire.
- This product should never be used by an individual with a medical condition that will limit the user’s capability to operate the product.
- Never use this product if there is a wound or injury on legs or feet.
- Do not use this product after taking pain relief medications, sedatives or alcohol. Consult with your doctor if you are under these circumstances.
- Do not use this product when you have insensitive skin in your targeted areas or in an environment of poor air circulation. The unattended use of heat by children or incapacitated persons may be dangerous.
- It is recommended not to use this product 30 minutes before or after your meal.
SPECIAL WARNING:
- Do not place this product where it may fall into a tub or sink.
- Do not immerse water or other liquid with this product.
- Do not attempt to plug or unplug the power source while your feet are in the water container or with wet hands.
- Use the product on a dry sturdy level surface.
- Always unplug the power source before loading water or moving the product.
- If you take foot spa every day, it is recommended that you apply lotion or skin moisturizer on feet after use and wear socks to keep warm after taking foot bath.
ATTENTION:
- This product is being tested with water at the factory, if there is any water drops left inside the water container, it is normal.
- Optional: to speed up water heating time, it is fine to put warm water into water container, but the warm water temperature should be less than 40 Celsius degrees (104°F Fahrenheit degrees).
- When it is not in use, do not leave water inside the water container if the room temperature is lower than 0 (32°F). Frozen water inside the product may cause damage to its components.
|
---|---
Do not put foot spa massager on wet floor or inside bathroom| During use, all
wheels should be locked properly.
|
---|---
To speed up heating time, it is fine to fill up with warm water, as long as
the water temperature is less than
40 (104°F).
|
Never turn on power or operate the massager without having water inside.
|
Never stand on the cover or inside the water container.
| Do not drag around the massager with its power cord. Do not plug in or unplug
the power cord with wet hands.
|
Do not fill up warm water that is more than 45C (113F) degree. It may lead to
the unit overheating.|
Always turn off power and unplug the power cord before moving or cleaning.
PRODUCT PARTS
Figure 1: Control Panel
Note: Display temperature is in Celsius.
Control
Button
|
Function
|
Default
|
Selection
---|---|---|---
On / Off| Turn on or off power
Temp +/-
| Increase or decrease the water
temperature
|
35°C (95°F)
|
35°C to 48°C (95°F – 118°F)
Timer
|
Set timer
| 30
minutes
| 10, 20, 30, 40, 50,
60 minutes
Massage
| Turn on or off
rolling 15 Slow, Fast, rolling
massage minutes speed
Bubble/Red Light
| Turn on or off bubble massage or red light
therapy
|
Off
|
Bubble massage, red light therapy, working alone or simultaneously
LCD screen
| Constantly displays current water temperature
inside water container
Pull Handle
|
To move the product around on a hard, flat floor
Figure 2: Pull Handle
OPERATION INSTRUCTION
NOTE: You must fill in water before turning on the foot bath massager. Never try to operate this product without having water inside the water container.
1| Assembly| · Refer to Figure 2.
· Check and make sure there is not any damage to the product especially its case and power cord.
· Insert the caster wheels x 4. Two caster wheels with locking system should be on the same side for easy locking and release.
· Remove the detachable cover
---|---|---
2| Stabilize the Product| · Put the massager on the flat, dry
floor where you want to use.
· Make sure the 4 wheels on bottom of
massager are stabilized so that the
| | massager will not move away during
| | use.
· Make sure you are seated on chair or sofa before starting the foot spa
| | massager.
· Do NOT plug in power cord to wall outlet yet.
3| Fill up with| · You must fill up with water before
| Water| turning on the foot bath massager. Never try to operate this product
without having water inside the water container.
· Fill up water with a water bucket. Do NOT put your massager under a faucet directly.
· Be careful NOT to spill water onto the control panel.
· To speed up the water heating time, you can put in warm water but the warm water temperature should be less than 40 Celsius degrees (104°F).
Water Level:
· The maximum water level is 60% of the water container or to its maximum water level indicator.
· It is recommended to fill water 1 to 2 inches under its maximum water level.
· Never fill up water that is higher than
the maximum water level, it will
---|---|---
| | affect the water jet massage function.
· After filling up water, make sure your hands are not wet; use a dry towel to clean up any water drops on the control panel.
· Plug in the power cord to a wall
outlet.
---|---|---
4| ON/OFF| · Press the ON/OFF button once to turn on power, the
two-digit LCD screen immediately shows the current water temperature.
· Press the ON/OFF button again to turn off power completely.
· The default spa massage time is 30 minutes once the power is turned on. (Figure 1). You can use the Timer to increase the spa massage time (up to 60 minutes).
· The default maximum water heating temperature is 35°C (95°F) once the power is turned on.
· Heating function will automatically be ON if the current water
temperature is lower than its default
| 35°C (95°F). | ||
|---|---|---|
| 5 | Heating | Automatic water temperature balancing system: |
· If the water temperature is lower than
35°C (95°F), the Heating function will be turned on automatically and stop when the water temperature reaches 35°C (95°F). When the water temperature cools down below 35°C (95°F), the Heating function will turn on automatically again.
· When the water temperature reaches its default maximum temperature (35°C/95°F), the Keep Warm function takes effect.
Note: the Heating function will not be on if the water temperature is already higher than its default maximum 35°C(95°F).
Changing the Default Water Heating Temperature:
· If you prefer to change its default
maximum water temperature to be
| | higher than 35°C (95°F), you can press the TEMP + / TEMP – to reset the maximum water heating temperature.
· The highest heating temperature you can set is 48°C (118°F).
· The lowest heating temperature you
can set is 35°C (95°F).
---|---|---
6| Temp+/-| When to use Temp+/- :
· The Temp+/- button can be used to change maximum water heating temperature under any massage modes.
· Press TEMP + to increase water heating temperature you want. After 3 seconds, the set temperature will disappear from LCD screen, and its LCD display will switch back to show the current water temperature.
· Press TEMP – to decrease water heating temperature. After 3 seconds, the set temperature will disappear from LCD screen, and its LCD
display will switch back to show the
| | current water temperature.
Minimum and Maximum Water Temperature :
· The highest heating temperature is
48°C (118°F).
· The lowest heating temperature is 35°C (95°F).
· If you do not press the Temp+/- button to adjust the default heating temperature, the water temperature is 35°C (95°F).
· The Automatic Water Temperature Balancing System will be initiated to turn on/off the Heating function automatically to keep water
temperature at 35°C (95°F).
---|---|---
7| Two-Digit display| · When the power is turned on, the LCD
screen displays its current water temperature and its default time (30
minutes).
8
|
Bubble Massage /
| Press Bubble / Red Light button to turn on bubble massage or red light
therapy:
| Red Light| · Press Bubble button one time: air bubble
massage is on.
· Press Bubble button two times: red light therapy is on.
· Press Bubble button three times: both air bubble and red light are on.
· Press Bubble button four times: air
bubble and red light are off.
---|---|---
9| Massage| · Press Massage button to turn On/Off the rolling
massage function.
· Default time for the rolling massage is 15 minutes.
· Massage mode: 3 massage modes to choose for slow or fast rolling
massage speed.
10| Timer| · Default spa massage time is 30 minutes.
· Press Timer button to choose 10, 20, 30, 40, 50, 60 minutes.
· It is recommended NOT to use the product for more than 60 minutes continuously. Always take 10 to 15
minute breaks after each cycle.
11| Water| · This product has static water
| Drainage| drainage.
· You MUST unplug the product from outlet before drainage.
· After each use, before trying to drain out water, always turn off all functions on control panel.
· Put a water bucket under the water drainage pipe; make sure no water will spill onto the floor.
· Release the Drainage Pipe at the back of case (Figure 2) and put it into the water bucket to start draining water.
· Lock back the drainage pipe to the massager after finishing drainage (Figure 2).
Attention:
· There may have small amount of water left inside water container after drainage. Use a dry towel to clean up.
· Never try to pour out water by
flipping over the water container.
---|---|---
12| Using bath
salt / herbal
| · You can put an herbal bag inside the
water container but make sure the
| bag| herbal bag will not break and block the filter.
· If you use herbal bag or bath salts, it is recommended to clean up right after each use so that no residue will
block the filter or water pump.
---|---|---
13| Water Jet| · The Water Jet is located inside the water
container under the control panel.
· The water jet is stronger when the
water level is lower.
14| Pull
Handle
| · The Pull Handle is for you to move
the massager around on hard, flat
| | floors. (Figure 2)
· Its maximum capacity is 50 lbs.
· It is recommended that you drain out water before pulling the massager, if
| | the floor is not hard and flat (such as
| | on carpet).
· Always put back the pull handle onto the massager after each use.
· NEVER use the pull handle to lift up
and carry the massager around.
15| Clean up| · Make sure your hands are not wet
| | when unplugging power cord from outlet.
· After each use, before trying to clean up the container with dry towel, always turn off power on control panel and unplug the power cord from wall outlet first.
· Allocate power cord properly to make sure not to immerse water.
· Do not use the power cord as a hanger to pull or drag away the massager.
· Use only soft, dry towel to clean up the control panel or the water container.
· Once a while, you can put in clean water and turn on the product for about 2 to 4 minutes and then drain out water from its drainage pipe to
clean up its filter and water pipe.
---|---|---
Features
- Motorized rolling massage with 4 massage rollers, melt away calf and foot stress.
- Customized water temperature control (35°C to 48°C (95°F – 118°F) and selective rolling massage speeds.
- With smart thermal control water temperature automatic balancing system, turn on or off the heating automatically.
- Two water jets surf water with air bubbles simulating foot reflex zones.
- Calf-deep water container provides hot-tub spa for both feet and legs.
- Built-in portable pull handle and mobile caster make it easy for storage or transport.
- Air bubble massage with red light therapy.
- Static water drainage function.
- With protection cover to avoid water spilling out.
- Timer with selective 10 to 60 minutes, default timer 30 minutes
Specifications
- Power: 110V/60Hz 800W
- Default spa massage time: 30 minutes (selective from 10, 20, 30, 40, 50, 60 minutes)
- Default rolling massage time: 15 minutes.
- Minimum and maximum heating temperature: 35°C to 48°C (95°F – 118°F).
Cleaning and Maintenance
- Before cleaning, you must turn off the power and unplug the power cord from the electrical outlet.
- Make sure the water drainage valve is closed and the power cord is properly affixed to the back of the case.
- It is recommended to always drain out water along the water drainage valve; do not pour out water over the control panel or cover.
- Clean the water container only with a soft, dry towel. Never use strong abrasives, detergents, or cleaning agents for cleaning.
- Do not immerse the product in water or put it under the faucet to do cleaning or filling in water.
- If you put in a bath salt, herbal bag, and or other spa detergents, try to clean up right after each use to make sure the filter and water pipe is not blocked. To clean up, you can put in some clean water and turn on the massaging function for 1 minute and follow the water drainage procedure to drain out water.
Storage
- Unplug the power cord from the electrical outlet and allow it to cool down and dry.
- Place it in its box or in a clean, dry location.
- Do NOT drag or hang the unit with its power cord.
- This product is designed for household use only.
- Never put the product close to a fireplace or other heating sources.
Correct Disposal of this product: This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used product, please use the return and collection system or contact the retailer where the product was purchased from.
Troubleshooting
| Problem | Cause | Solutions |
|---|
Water Jet not working
| ****
Water filter or water valve is blocked.
| Check and clean up the water filter and water
drainage pipe if necessary.
Heating not working
| Heating function is turned off. It may reach the preset maximum water temperature. The adjusted highest water temperature may be too low.
The current water temperature inside water container is already higher than your preset water temperature.
| ****
Press the Temp+ to adjust the preset highest water temperature.
Product stops working| |
| | power again.
---|---|---
Auto shut off for protection when using too long time.
| Try to unplug the power source completely for a while and plug in the
power again.
The water drainage valve is not closed.
| Check and make sure the water drainage valve is
closed.
Product stops working
| The water temperature is higher than your preset highest temperature.| Try to put in some cold water to cool down the water temperature. Or, reset the highest water
temperature.
Rolling massage is overused.
| Turn off the product completely and let it cool down for a while before
using it again
Air Bubbles not strong enough,
water jet not
| It needs some time to generate air bubble| Try to turn on the massage
function and wait for a while
strong
enough
| Water level can affect the
water jet
| Try to lower the water
level
---|---|---
Rolling Massage not working
|
Power connection. Rollers are not installed properly
| Check the power connection. Make sure the rollers are installed inside the water
container properly.
Note: This product is not intended to diagnose, treat, cure, or prevent any disease.
Limited Warranty
Please contact seller for warranty. Limited warranty from the manufacturer only for the original purchaser against manufacturing or workmanship defect under normal use. Due to the hygiene or rehabilitation nature of this product, it is non-returnable. Carepeutic® is a registered trademark, all rights reserved, © Q.L.M. www.ideatomorrow.com Powered by Carepeutic® Global Lab
FREQUENTLY ASKED QUESTIONS
What is the primary use of the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The leg spa bath massager is designed for use on feet and calves.
What is the power source of the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The power source is Corded Electric.
What material is used in the construction of the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The massager is constructed with plastic material.
How much does the Carepeutic KH-301 Leg Spa Bath Massager Compact weigh?
The weight of the leg spa bath massager is 11.5 Pounds.
What are the dimensions of the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The product dimensions are 18 x 16 x 14.3 inches.
What is the specific model number assigned to the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The model number is KH301.
What type of massage does the Carepeutic KH-301 Leg Spa Bath Massager Compact provide, and how many rollers does it have?
The massager provides motorized rolling massage with 4 massage rollers.
How does the Carepeutic KH-301 Leg Spa Bath Massager Compact control water temperature, and what is the special feature of its thermal control system?
The massager has customized water temperature control with a smart thermal control water temperature automatic balancing system that turns on or off the heating automatically.
What hydrotherapy features are included in the Carepeutic KH-301 Leg Spa Bath Massager Compact?
The massager includes two powerful water jets surfing water with air bubbles simulating foot reflex zones. It also has a calf-deep water container that provides a hot-tub spa for both feet and legs.
How is the Carepeutic KH-301 Leg Spa Bath Massager Compact designed for storage or transport, and what features facilitate this?
The massager has a built-in portable pull handle and mobile caster, making it easy for storage or transport. It also includes static water drainage with a protection cover.
What additional massage features does the Carepeutic KH-301 Leg Spa Bath Massager Compact offer, including light therapy?
The massager provides air bubble massage with red light therapy. It also offers rolling massage with 3 different rolling speed modes and a massage timer.
How does the Carepeutic KH-301 Leg Spa Bath Massager Compact handle international use, and what precaution is provided in this regard?
The note mentions that products with electrical plugs are designed for use in the US, and users may need an adapter or converter for international use. It's important to check compatibility before purchasing.
DOWNLOAD THE PDF LINK:Carepeutic KH-301 Leg Spa Bath Massager Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>