PARIS RHONE PE-TM001 Wireless Smart Meat Thermometer Instructions

PARIS RHONE PE-TM001 Wireless Smart Meat Thermometer

WARNING

1. The probe is inserted into meat to exceed the safety line. You can’t put the probe in the oven alone because the probe will be damaged by the high temperature.
2. The distance of the probe is influenced by the grilling equipment.
3. Do not use the probe in the microwave oven.
4. Do not wrap the probe in a tinfoil.
5. Probe will be very hot during or just over a cook. DO NOT touch it with bare hands.
6. Don’t burn the black part with fire, it can only withstand 300°C (572°F), or it will be damaged.

Download the APP

Search “Aicooking” in App Store or Google play or scan the following QR code.

IOS10.0 and above, AndroidP5.0 and above.

NOTE:

• The APP does not have a cloud server and will not automatically collect customer private information.
• Please allow location access and turn on Bluetooth while installing and using the APP.

How to Use

Please charge the probe for 20 minutes before EACH USE.

1. Toggle the switch to the OFF position. The indicator stays solid red until the thermometer is fully charged.
2. Toggle the switch to the ON position. The indicator flashes green means the probe is not connected. The indicator stays solid green after the probe is connected.
3. Turn on Bluetooth, launch the Aicooking APP on your phone, and the probe will connect to the APP automatically.
4. Insert the probe into meat or food. Real-time temperature data will display on the APP.
5. To disconnect, charge the probe, close the APP or turn off Bluetooth on your phone.

Guided Cook System

1. Click “Select Menu”.
2. Choose food type.
3. Select a target temperature.
4. Finished.

Customize Target Temperature

1. Click “Add New Menu”.
2. Select a target temperature.
3. Click “Start BBQ”.

Settings

1. Enable automatic device connection.
2. Select the temperature unit (°F/°C).
3. Turn on/off voice and vibration.
4. Set up the permission of Bluetooth and location access.
5. Select a display language.
6. Privacy policy, check for updates.

FAQ

• Q1: Why is the wireless signal transmission limited to 5 meter (10 feet)?
  • A: Because the oven has a signal shielding function, such as weber or green eggs.
• Q2: Does the probe need to charge before using?
  • A: Yes, charge it for 20 minutes before each use.
• Q3: Can the black part of the probe be roasted with fire?
  • A: No, fire will melt the black part of the probe.
• Q4: Do I still need to reset the menu when the Bluetooth signal has lost its connection?
  • A: No, APP will update the data automatically, as long as you receive the drop alert and connect to APP in time.

WARRANTY

• 12 months after-sales service

SERVICE

If you need any further information or assistance, please feel free to contact us directly, we will reply you at the very first time and do our best to solve it.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

• [email protected]
• www.parisrhone.com
• Manufacturer: Shenzhen Danya Technology Co.,Ltd.
• Address: Room 3323, Building C, Galaxy World Phase II, Minle Community, MinZhi Street, Longhua District, Shenzhen, China

References

• Amazon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>