AIWA AT-X80PANC Active Noise Cancelling TWS Headphones User Guide

June 15, 2024
Aiwa

AIWA AT-X80PANC Active Noise Cancelling TWS Headphones

AIWA-AT-X80PANC-Active-Noise-Cancelling-TWS-Headphones-
PRODUCT

AIWA Electronics International Co., Ltd. Explore more at www.int- aiwa.com

Product Overview

AIWA-AT-X80PANC-Active-Noise-Cancelling-TWS-Headphones-
FIG-1

Product Specifications

  • Model Number : AT-X80PANC
  • BT Version: V5.2
  • IP Rating: IPX5
  • Rated Voltage/Current: 51/ IA
  • Rated Power: 3mW
  • Frequency Response: 20Hz-20KHz
  • Battery (Earbuds): 3.7V/30mAh
  • Battery (Charging Case): 3.7V/300mAh
  • Supported Profiles: HFP1.7, A2DP1.3, AVRCPl.6
  • Audio Decoding: AAC, HSBC
  • impedance: 32 Q at 1kHz
  • Sensitivity: 110dB ±3dB
  • Noise Reduction: 23-25dB
  • Estimated Transmission Distance: 10 Meters (No Obstacles)
  • Working Time (Normal Mode): About 5 Hours
  • Working Time (Turn on Noise Reduction): About 4.5 Hours
  • Earbuds + Charging Case Standby Time: About 200 Days
  • Charging Time (Charging Case): About 1.5 Hours
  • Charging Time (Earbuds): About 1.5 Hours
  • Charging Time (Charging Case with Earbuds): About 2 Hours
  • Earbuds Weight: 3g Each
  • Charging Case Weight: 32g

Product Usage Guide

AIWA-AT-X80PANC-Active-Noise-Cancelling-TWS-Headphones-
FIG-2

power on

Automatic power on: When the charging case was opened, the earphones will automatically turn on, and the blue light will stay on for 3 seconds to enter the correct state. The red and blue lights on the main ear will flash, and the auxiliary ear will have no light effect.

Manual power on: Press and hold the (left/right) multifunction button for 3 seconds to turn on the earphones. When the earphones are turned on, the blue light on the (left/right) earphone will stay on for 3 seconds to search and pair. The red and blue lights on the main ear will flash, and the auxiliary ear will have no light effect.

power off

  • Automatic shutdown: Place the (left/right) earphones into the charging box separately, with the green light flashing once to check that the charging is normal. After closing the cover, the earphones will automatically shut down. Manual
  • shutdown: Press and hold the (left/right) multifunction button for 8 seconds to turn it off. After 5 minutes of disconnection, the AT-X80PANC will automatically off.

Music Control

  • play / Pause
    • click touch sensor once(l)
  • Next Song
    • Press and hold the right touch sensor for 2.5 seconds and raise your hand
  • Previous Song
    • Press and hold the left multi-function button for 2.5 seconds to release
  • Volume +
    • Double-click the right multi-function button (2)
  • Volume –
    • Double-click the left multi-function button(2)

Call Control

  • Answer / Hang up
    • Click the touch sensor once(l)
  • Voice Assistant
    • Press and hold the touch sensor for two (2) seconds
  • Mode Switching
    • Click the touch sensor thrice(3)

Mode Switching

AIWA-AT-X80PANC-Active-Noise-Cancelling-TWS-Headphones-
FIG-3

Connecting the Product

AIWA-AT-X80PANC-Active-Noise-Cancelling-TWS-Headphones-
FIG-4

  1. Turn on Bluetooth (BT) on your mobile device
  2. Turn on Earbuds (Flipping open charging case will power up earbuds)
  3. Search and connect to “AIWA AT-X80PANC” from your mobile device

Troubleshooting

L side earbud cannot be linked with R side earbud. Solution: Place both earbuds back into the charging case and close the case. Re-open the lid after a few seconds. The earbuds should now be linked to each other and ready to connect to your mobile device. Only one (1) side earbud can be linked to your device. Solution: Ensure that both earbuds are turned ON and disconnected from any devices. Tap both touch sensors four (4) times, then place the earbuds back into the charging case. AT-X80PANC will be ready to connect once you remove them from the charging case.

Battery & Charging

Earbuds low battery
When the earphones have low battery, the red light indicating low battery’ will flash quickly every 5 seconds for 3 minutes. Please place the earphones into the charging case to recharge.

The low battery of charging box
When the battery indicator light on the charging box flashes orange four times, it indicates that the charging box has a low battery and needs to be charged. Please use a standard charger to recharge it.AIWA-AT-X80PANC-
Active-Noise-Cancelling-TWS-Headphones-FIG-5

Place the left and right earphones into the charging box separately. The green indicator light of the charging box will flash once, and when the cover is closed, the charging box will charge the earphones. While charging, the green light of the charging box will remain on for an extended period, and it will take about 1.5 hours to fully charge the earphones.AIWA-AT-X80PANC-Active-
Noise-Cancelling-TWS-Headphones-FIG-6

When the charger is connected to the charging box, the orange light on the charging box will flash. Once fully charged, the orange light will stay on; and when the charging cable is unplugged, the orange light will turn off. The charging time for the charging box is approximately 1.5 hours

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals