BNT Dummy Security Camera User Manual
- June 15, 2024
- BNT
Table of Contents
Dummy Security Camera
User Manual
How To Mount The Camera
Steps:
-
Choose where you want to mount the camera, ceiling mount, or wall mount.
-
Tear off the location sticker and stickit to the location you choose
-
Drill holes at the location of the screw holes on the sticker
-
Put the rubber plug into the 2 screw holes, screw in the screws. Keep part of the screw above the surface
-
Align the camera with the 2 screws on the wall, rotate the camera clockwise slightly to fix the camera.
Activate the warranty period
Facebook member discount
https://www.facebook.com/groups/2206092852880257
Product Information
Camera Type: | Dummy / Fake |
---|---|
Shape: | Dome |
Color: | White |
Size: | 1Pack/ 2Pack/ 4Pack |
Housing Material: | ABS Plastic |
Protection Level: | IP 65 |
Installation Environment: | Indoor/Outdoor |
Installation Type: | Ceiling / Wall Mount |
Power Supply: DC 1.5V | 2xAA Battery (not included) |
Camera Weight: | 97g |
Working Current: | 3mA |
Power consumption: | 0.0045w |
Working Time: | About 3 months |
(with 2x AA 2500mAh battery )
Dimensions
Tips
- Use both fake and real camera to get a balance between cost and security .
- Choose a right location to install the fake camera, and paste warning.
Attention
- Please dispose of used batteries properly to protect the environment.
- When replacing the battery, please avoid rain and moisture erosion to maintain the life of the battery case.
- Choose batteries with good quality, to avoid leaking liquid cause damage to the battery compartment.
Customer service
Please contact our after-sales service mailbox:
support@bnt-store.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>