PHILIPS HR2500-00 Eco Conscious Edition Blender User Manual

**PHILIPS HR2500-00 Eco Conscious Edition Blender User Manual

**

General information

General specifications
Product features: ProBlend technology, Tritan Renew™ Tumbler, NutriU app, Easy to use, Detachable blade, Sustainably designed, Modern and minimalistic sty.

Weight and dimensions
Dimensions of product (LxWxH): 118 x 116 x 360 mm Weight of product: 1.05 kg

Design
Color(s): Silk White Matte

Technical specifications
Power: 350 W
Voltage: 220-240 V
Cord length: 0.85 m
Working capacity tumbler: 0.6 L

Finishing
Material of main body: Bio-based plastic

Important repair instructions

• Only skilled personnel should carry out the repair.
• After repair the appliance should function properly.
• After repair the appliance has to meet the regulatory and safety requirements that were applicable at the time of release of the model.
• After repair the appliance always has to be tested for electrical safety according VDE 0701-0702 and for medical products IEC 62353.

Disassembly – and Reassembly advice

During disassembly and repair

Wiring and crimp connections instructions

Caution: Some wiring insulation types, like silicone wiring, are very soft and easy to damage Replace damaged wires.

Whenever an electrical component is repaired, crimp connectors should be opened.

• The eastest way is to reopen a closed crimp housing, is by attacking from the side with pliers.

Note: Do not cut the old crimp as this causes shortening of the wires and can be an issue afterwards. Always connect the wires with a new 2 or 3-wire crimp housing.

Required tool when replacing crimp connections:

Ratchet Crimping Tool

• Oval crimp tool for insulated cable connectors
• 0.5 mm²-6 mm²

Preparing of wires.

• Twist the nude copper wires together along the entire length of the strip.

  • 16 mm (0,63 in) Max
  • 13 mm (0,51 in) Min

• Insert the wires into a new crimp housing.

• Make sure not to miss any single wire, as any loose wire that comes Into contact with metal parts of the appliance may cause electrical shocks.

• Center the ratchet crimping tool on the crimp housing, and crimp with 6 kg/cm²

• Perform a pull test to check that wires are . firmly fixed!

• The ribs are used as strain relief for these crimp connector types

• Always use or replace tie ribs when replacing crimp connectors!

WARNING:

• Make sure that the crimp is fully tightened. If not done properly it can cause inner sparkling, cause overheating and in worst case cause a firel.
• Please align the crimp in such a way that with high air humidity, moist cannot be captured into the crimp housing.
• When reassembling the open sides of the crimp housings should always face down.

*Reference Documents

1. EC61210-1993 Flor quick-connect terminations for electrical copper conductors Safety requirements
2. IEC 60352-2:1990 (and 1-1996 and 2:2002) “Solderless comped connections-General requirements, test methods and practical guidance

Spare Parts

Part List

Version History

1. Version A:  Initial release

www.philips.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>