iclever IC-GK08 Keyboard and Mouse Combo User Manual

iclever IC-GK08 Keyboard and Mouse Combo

Package Contents

• 1 x 2.4G Keyboard
• 1 x 2.4G Mouse
• 1 x USB Charging Cable
• 1 x 2.4G USB Receiver (stored in the back of mouse)
• 1 x Keyboard Cover
• 1 x User Manual

Specification of Keyboard

• Frequency band: 2402 MHz~ 2480 MHz
• Maximum transmission power: 0 dBm

Specification of Mouse

• Frequency band: 2405 MHz – 2470 MHz
• Maximum transmission power: 0 dBm

Product overview

Keyboard:

1. Fn Lock Indicator: Press key to activate Fn lock function, andFn Lock indicator will turn to be blue. With the activation of Fn lock,
   shortcut keys on F1-F12 are able lo press directly without pressing Fn key.

2. Numeric Indicator: The numeric indicator will be green when NumLock is activated.

3. Caps Lock Indicator: The caps lock indicator will be green when caps lock is activated.

4. Power Indicator: The indicator will be on for 3s when keyboard is on. Pressing keys, power indicator will flash. Each flash represents 25% battery power, 4 flashes in total.

5. Charging indicator: Stay in red when charging, and it will be off after fully charged.

6. Power Switch: Move the switch to ON/OFF to turn on/off the keyboard.

Mouse:

1. ON/OFF Switch: Turn on/off the mouse.
2. Storage Slot: The place to insert two AAA batteries(not included) and store the USB receiver (USB Receiver is stored in here).
3. DPI Switch: 3 adjustable dpi (800, 1200, 1600) are available. Press DPI Switch to change.
4. Scroll Button: For scrolling.

Sleep Mode
The keyboard and mouse will enter sleep mode if idle for 10 minutes. Press any key and wait for 3s to exit sleep mode.

Keys and Functions

The table below describes special key combinations for Windows and Mac OS. For all the media keys to work as normal, please press ‘fo” + “Q” or “In” + ‘W’ to choose right system.
( “fn”+ 11Q” is for Mac OS, and “fn”+ “W” is for Windows )

Keyboard Shortcuts

Shortcuts
Select all| Window
Ctrl+A| Mac OS cmd+A
---|---|---
Copy| Ctrl+C| cmd+C
Cut| Ctrl +X| cmd+X
Paste| Ctrl +V| cmd+V

Special gray keys for Mac 05 Users

Before using, please ensure

• You already press “Fn” + “Q” keys to switch to Mac OS.
• The input method has been changed to British (not British-PC)

Note: , means to click this key directly; and I shift , means to press these two keys simultaneously.

Pairing Instructions

For Windows users

• Step 1. Charge the keyboard for 2 hours.

• Step 2. Remove the USB Receiver from the bottom of mouse and insert two AAA batteries into the slot (AAA batteries are not included).

• Step 3. Move the mouse ON/OFF Switch to “ON” to power on.

• Step 4. Plug the USB Receiver into the USB-A port of the computer.

• Step 5. Move the keyboard power switch to “ON” to power on.

• Step 6. Press “Fn” + “W” to switch to Windows system.

• Step 7. Done, ready to use.

For Mac 05 users:

• Step 1. Charge the keyboard for 2 hours.
• Step 2. Remove the USB Receiver from the bottom of mouse and insert two AAA batteries into the slot (AAA batteries are not Included).
• Step 3. Move the mouse ON/OFF Switch to “ON” to power on.
• Step 4. Plug the USB Receiver into the USB-A port of the computer or a hub.
• NOTE: if your Mac is USB-C port please connect it by a hub-
• Step 5. Move the keyboard power switch to “ON” to power on.
• Step 6. Press “Fn” + “Q” to switch to Mac OS (MacBook I iMac).
• Step 7. Done, ready to use.

If fall to connect, please read FAQ, and follow as below:
A. Keyboard re-pairing:

• Step 1. Plug out the 2.4G USB receiver. Turn on the keyboard.
• Step 2. Press “Esc” + “Q” keys simultaneously; the indicator will flash green quickly.
• Step 3. Immediately plug the 2.4G USB receiver into the computer within 1 Os and keep the keyboard close to the receiver within 30cm (0.98 ft ).
• Step 4. With connected successfully, the power indicator will flash green for 3 limes then to be off.

Note : Keep the keyboard off the ground.

B. Mouse re-pairing

• Step 1. Plug out the 2.4G USB receiver and turn off the mouse.
• Step 2. Holding “mouse right key” and “scroll button” for 5s and turn on the mouse ( keep holding “mouse right key” and “Scroll Button” before finishing step 3).
• Step 3. Immediately insert the receiver into the computer within 1 Os and keep the mouse close to the receiver within 30cm (0.98 ft ).
• Step 4. Move the mouse to test.

Note: If failed, please repeat above steps again.

Device Requirements
Windows XPNista/7/8110, and Mac OS 10.14.6 or above with USB-A port.

Note

1. The keyboard is not fully compatible with Mac mini, smart TV, and XBox.
2. If your Mac is USB-C port, please try to connect ii by a hub, extender or something similar.

Charge the Device
If your mouse stop working, please try to change new two AAA batteries. If your keyboard stop working, please charge the keyboard by included charging cable to PC/laptop USB port directly.

Note

• Keyboard output: DC 5V/200mA; USB charger is not included.
• In the charging process, the indicator will light up red, and it will be off after fully charged. Generally, it takes about 2 hours to get fully charged.

Tips

• Keep away from oil, chemical, liquid, and snacks.
• Keep away from sharp objects.
• Keep away from metal and other sources of the wireless signal.

Contact
Email: support@iclever.com

FAQ

Q. Is this keyboard fully compatible with MacBook and iMac?
No, it is not fully compatible. The keys of are not working for MacBook and iMac. In addition, if your device is MacBook with USB-C port, please try to connect the USB receiver by a hub, extender or something similar.

How to Fix Keyboard Typing Multiple Letters on Windows.

How to Fix Keyboard Typing Multiple Letters on Mac.

On a Mac, choose the Apple menu> System Preferences, click Keyboard , and choose the Keyboard tab. Locate the Key Repeat' slider setting and adjust it to the Off position.

Cursor does not follow mouse movements.

Use a mouse pad. Avoid using your mouse on: Glass and other see-through surfaces, Reflective surfaces, such as mirrors and metal desks, and Wood grains and grooved surfaces. Try the mouse on a piece of white paper to make sure it isn't a tracking issue on the particular surface you're using.

Miss the USB Receiver.

The USB Receiver is located in the bottom of mouse storage compartment. Please open the cover to get the USB Receiver. Only one USB Receiver is included and both works for keyboard and mouse.

Hereby, Thousand shores Deutschland GmbH] declares that the radio equipment type [2.4G Keyboard and 2.4G Mouse, IC-GK08] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address:http://files.iclever.com/ic-gk08-uk-doc.pdf
Learn more about the UK Declaration of Conformity, please visit the following website: http://files.iclever.com/gk08-uk-doc.pdf

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>