iClever IC-DK03 Combo Multi Device Connection Wireless Keyboard and Mouse Combo User Manual

iClever IC-DK03 Combo Multi Device Connection Wireless Keyboard and Mouse

Combo

Package Contents

• 1 x Dual Mode Keyboard
• 1 x Dual Mode Mouse
• 1x 2.4G USB Receiver (for 2.4G connection)
• 1x USB Charging Cable
• 1 x User Manual

Keyboard Overview

1. Charging Indicator: stay in red when charging and turn green after fully charged (about 2 hours fully charged).
   Caps lock Indicator & Battery Checking:

2. Caps lock Indicator:
   press the “caps lock” key to switch between uppercase and lowercase. Battery Checking:
   press the “F6” or “Fn” + “F6” key to check the battery status; the indicator light flashes once, twice, three times, and four times to indicate that the battery is less than 25%, 50%, 75%, and 100%.

3. 2.4G Wireless Channel Indicator: turn green for 3s after switching to the 2.4G wireless mode.

4. Bluetooth Channel Indicator: to indicate the Bluetooth channel 1/2.

5. Power Switch: slide right to turn on and left to turn off.

6. Charging Port: for charging.

Mouse Overview

Note :
Backward and Forward buttons are not working in iOS and Mac OS.

1. 2.4G/BT1/BT2 Indicator : to indicate the connection channel status.
2. Connect Button: click this button to switch between the 2.4G/Bluetooth 1 and Bluetooth 2 channels. Hold and press this button for 5s to Bluetooth pairing mode when in the BT1/BT2 channel.
3. ON/OFF Switch : slide “ON” J “OFF” to turn on/off the mouse.
4. Storage Slot: used to store the USB receiver (USB Receiver is in here)

Specifications for the Mouse

Connection

Operating distance DPI

| 2.4G Wireless and Bluetooth

< Sm 126ft

800-1200-1600-2400

---|---
Dimensions| 105″64″39mm / 4.13″2.52″1.54in
Lithium battery capacity

Charge time

Uninterrupted working time Compatibility

| 300 mAh

< 2 hours

40 hours

Windows, Mac OS, iOS, Android

“Frequency band: 2403 MHz-2480 MHz
“Maximum transmission power: 0 dBm

Specifications for the Keyboard

Dimensions

Lithium battery capacity

| 428″125″16mm / 16.85 “4.92 “0.63in

280 mAh

Charge time

Uninterrupted working time Compatibility

| < 2 hours

90 hours

Windows, Mac OS, iOS, Android

“Frequency band: 2402 MHz-2480 MHz
“Maximum transmission power: O dBm

Keyboard Pairing Instruction

2.4G Wireless Connection

• Step 1 . Remove the USB Receiver from the bottom of the mouse
• Step 2. Plug the 2.4G USB receiver into the port of the computer.
• Step 3. Slide the power switch right to power on the keyboard.
• Step 4. Press the key to switch to 2.4G wireless mode.
• Step 5. Press the “fn” + “Q”f’W’ keys to choose the right system. (fn+Q is for iOS and Mac OS, and fn+W is for Windows and Android)

Bluetooth Wireless Connection

Pair with 1st device

• Step 1. Slide the power switch right to power on the keyboard.
• Step 2. Hold and press the key of 3 for 5 seconds to pairing mode in channel 1, and the Bluetooth channel 1 indicator will quickly flash blue and start to search for the available Bluetooth device.
• Step 3. On your Bluetooth device, find the Bluetooth name “iClever IC-DK03 KB” and click to connect it.
• Step 4. The Bluetooth channel indicator will be off after successfully paired.
• Step 5. Press the “fn” + “Q”l” W’ keys to choose the right system. (fn+Q is for iOS and Mac OS, and fn+W is for Windows and Android)

Pair with 2nd device

• Step 1. Hold and press the key for 5 seconds to pairing mode in channel 2, and the Bluetooth channel 2 indicator will quickly flash blue and start to search for the available Bluetooth device.
• Step 2. On your Bluetooth device, find the Bluetooth name “iClever IC-DK03 KB” and click to connect it.
• Step 3. The Bluetooth channel indicator will be off after successfully paired.
• Step 4. Press the “fn” + “Q” W” keys to choose the right system. (fn+Q is for iOS and Mac OS, and fn+W is for Windows and Android)

Details of connection settings for the different system devices:

• For Windows 10 PC/laptop:
  Click Win > Setting > Devices> Bluetooth & other devices > Add Bluetooth or another device> Bluetooth > click “iClever IC-DK03 KB” to connect.

• For MacBook/iMac:
  Click System Preferences> Bluetooth > click “iClever IC-DK03 KB” to connect.

• For iPad & iPhone:
  Click Setting> Bluetooth > click “iClever IC-DK03 KB” to connect.

Notes:

• Auto re-connect function: the keyboard will connect with the last-used device automatically.
• Do not connect it via a Bluetooth adapter.
• If fail to connect, please read the FAQ.

Switch among connected devices.
Press key to switch among the connected devices.

Repair the channel that is already connected

• Step 1. Press the key to choose the Bluetooth Channel.
• Step 2. Hold and press for 5s to re-pair.

Pair with 2nd device

• Step 1. Hold and press the key of El for 5 seconds to pairing mode in channel 2, and the Bluetooth channel 2 indicator will quickly flash blue and start to search for the available Bluetooth device.
• Step 2. On your Bluetooth device, find the Bluetooth name “iClever IC-DK03 KB” and click to connect it.
• Step 3. The Bluetooth channel indicator will be off after successfully paired.
• Step 4. Press the “fn” + “Q” W” keys to choose the right system. (fn+Q is for iOS and Mac OS, and fn+W is for Windows and Android)

Details of connection settings for the different system devices:

• For Windows 10 PC/laptop:
  Click Win > Setting > Devices> Bluetooth & other devices > Add Bluetooth or another device> Bluetooth > click “iClever IC-DK03 KB” to connect.

• For MacBook/iMac:
  Click System Preferences> Bluetooth > click “iClever IC-DK03 KB” to connect.

• For iPad & iPhone:
  Click Setting> Bluetooth > click “iClever IC-DK03 KB” to connect.

Notes:

• Auto re-connect function: the keyboard will connect with the last-used device automatically.
• Do not connect it via a Bluetooth adapter.
• If fail to connect, please read the FAQ.

Switch among connected devices.
Press the key to switch among the connected devices.

Repair the channel that is already connected

• Step 1. Press the key to choose the Bluetooth Channel.
• Step 2. Hold and press for 5s to repair.

Mouse Pairing Instruction

2.4G Wireless Connection

• Step 1. Remove the USB Receiver from the bottom of the mouse.
• Step 2. Plug the 2.4G USB receiver into the port of the computer.
• Step 3. Slide the mouse ON/OFF switch to “ON” to turn on the mouse.
• Step 4. On the bottom of the mouse, click the “Connect” button to choose the 2.4G channel.

Bluetooth Connection

Pair with 1st device

• Step 1. Slide the mouse ON/OFF switch to “ON” to turn on the mouse.
• Step 2. On the bottom of the mouse, click the “Connect” button to choose the BT1 channel.
• Step 3. Hold and press the “Connect” button for 5 seconds to pairing mode in BT1 Channel, and the indicator will keep flashing.
• Step 4. On your device, find “iClever Mouse” and click to connect it.

Pair with 2nd device

• Step 1. Slide the mouse ON/OFF switch to “ON” to turn on the mouse.
• Step 2. On the bottom of the mouse, click the “Connect” button to choose the BT2 channel.
• Step 3. Hold and press the “Connect” button for 5 seconds to pairing mode in BT2 Channel, and the indicator will keep flashing.
• Step 4. On your device, find “iClever Mouse” and click to connect it.

Switch among connected devices
Click the “Connect” button to switch among the connected devices.

Repair the channel that is already connected

1. Step 1. Click the connect” button to choose the BT1/BT2 channel.
2. Step 2. Hold and press the “Connect” button for 5s until the BT1/BT2 channel indicator keeps flashing.
3. Step 3. On your device, find “iClever Mouse” and click to connect it.

Keyboard Keys and Functions

Before using, please ensure that you already choose the right system: fn + Q is for iOS and Mac OS and fn +W is for Windows and Android.

Your keyboard has by default access to the Media and Hotkeys such as Volume Up, Play/Pause, Volume Down, and so on. If you prefer to have direct access to your F-keys simply press on your keyboard to swap them.

Sleep Mode

• The keyboard will enter sleep mode if idle for 30 minutes.
• Press any key to exit sleep mode and wait for 3 seconds.

Charge the Device
It is recommended to use our included charging cable to directly connect with the computer interface. If you prefer to connect the charging cable with an adapter, before to use, please check your adapter voltage is lower than 5V.

• Output: DC 5V/200mA; USB charger is not included.
• In the charging, the indicator will stay red while charging, and it will light up green when fully charged. Generally, it takes about 2 hours to get fully charged.

Compatibility

1. For Bluetooth Compatibility: Mac, Android, iOS, Windows 8/8.1/10 PC and laptop with Bluetooth host.
   Note : it is not fully compatible with Mac mini smart TV and Xbox.

2. For 2.4G Wireless Compatibility: Windows 7/8/8.1/1 O PC, and laptop.

Tips

• Keep away from oil, chemicals, liquid, and snacks.
• Keep away from sharp objects.
• Keep away from metal and other sources of wireless signal.

FAQ’s

My keyboard fails to connect to 2.4G Mode

1. Ensure you already plugged the USB Receiver into the USB port.
2. Ensure you already press the key of
3. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
4. Charge the keyboard for 2 hours.
5. Move the receiver to a different USB port on your computer.
6. Try moving away at least 8 inches (20 cm) from metal and other sources of wireless signal. Try moving away from:
   • Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router
   • Computer power supplies
   • Metal or metal wiring in the wall
7. Try on a different computer or email us.

MY keyboard fails to connect to Bluetooth mode

1. Charge the keyboard for 2 hours.
2. Make sure that your iClever device and computer are within proximity of each other.
3. Try moving away at least 8 inches (20 cm) from metal and other sources of wireless signal.
4. Delete all the Bluetooth connection records. (For example for iPad click “Settings” > “Bluetooth” > under “MY DEVICE” to delete alt the Bluetooth connection records/
5. On your device, turn off the Bluetooth and turn it on again to Refresh. (For example for iPad click “Settings”> “Bluetooth” > if the on-screen switch beside Bluetooth currently shows as ON tap it twice to refresh it)
6. Connect it again or email us.

Is this keyboard fully compatible with Macbook(iMac?
No, it is not fully compatible. The keys of  are not working for Macbook and iMac.

Is this keyboard fully compatible with iPhone/iPad?
No, it is not fully compatible. The keys   are not working for iPhones and iPads.

Delay when typing or frequently net disconnected

1. Restart your Bluetooth device.

2. Charge the keyboard for 2 hours.

3. Keep the keyboard and computer within proximity of each other.

4. Try moving away at least 8 inches from:
   My devices that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router
   Computer power supplies, Metal or metal wiring in the wall

5. Do not use your wireless keyboard on metal surfaces.

6. Check if any updates are running in the background that may cause the delay.

7. Check your computer memory, insufficient memory may cause a delay.

8. Try on a different APP/device to connect.

If the problem persists you will need to follow specific steps based on your device OS. Please email us to get advanced troubleshooting.

How to fix keyboard typing multiple letters on Windows 107

Tum on the Filter Keys:
Click the win key> Settings > Ease of Access> Keyboard > find “Use Filter Keys”, and turn it on.

How to fix the keyboard typing multiple letters on Mac?

1. On a Mac, choose the Apple menu> “System Preferences”, click Keyboard”, and choose the Keyboard tab.
2. Locate the “Key Repeat” slider setting and adjust it to the “Off’ position.

Keyboard/Mice – Buttons or keys do not work correctly.

1. Restart your PC/laptop and iClever Keyboard/mouse.
2. Clean the button/key with compressed air.
3. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
4. Unpair/repair or disconnect/reconnect hardware.
5. Windows only – try a different USB port.
6. Try on a different USB port or a different computer.

The cursor does not follow mouse movements.

1. Use a mouse pad
2. Avoid using your mouse on Glass and other see-through surfaces, Reflective surfaces, such as mirrors and metal desks, and grooved surfaces.
3. Try the mouse on a piece of white paper to make sure it isn’t a tracking issue on the particular surface you’re using.

Keyboard stop working

1. Charge the keyboard for 2 hours.

2. Keep the keyboard and computer within proximity of each other.

3. Try moving away at least 8 inches from:
   Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router
   Computer power supplies, Metal or metal wiring in the wall

4. Do not use your wireless keyboard on metal surfaces.

5. Try on a different device to connect.

6. Contact us.

Miss the USB Receiver.

1. The USB Receiver is located at the bottom of the mouse storage Slot. Please open the cover to get the USB Receiver.
2. Only one USB Receiver is included and both work for the keyboard and mouse.

EU Declaration of Conformity
Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [Wireless Keyboard and Mouse Combo IC-DK03 Combo] complies with Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: http://files.iclever.com/ic-dk03combo-uk-doc.pdf

UK Declaration of Conformity
To learn more about the UK Declaration of Conformity, please check the below link: http://files.iclever.com/ic-dk03combo-uk-doc.pdf

Contact

Email support@iclever.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>