UGREEN LP176 Suction Cup Car Phone Mount User Manual
- June 15, 2024
- UGREEN
Table of Contents
UGREEN LP176 Suction Cup Car Phone Mount
Product Overview
- Side Arm
- Ball Joint Groove
- Fixing Nut
- Ball Joint
- Telescopic Arm
- Telescopic Knob
- Pivot Knob
- Pressure Valve
- Suction Cup
Installation
STEP 1
Unscrew the nut to let the ball joint pass through it, then insert the ball
joint into the groove and tighten the nut.
STEP 2
Clean a flat surface on the dashboard or the windshield.
STEP 3
Pull up the pressure valve and attach the product to the clean surface. Press
down the pressure valve after applying firm pressure.
STEP 4
Wait for 24 hours before use.
STEP 5
Place your phone in position.
STEP 6
Adjust the length and angle of the mount.
Release The Mount
Package Contents
- 1×Suction Cup Car Phone Mount
- 1×User Manual
Parameters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>