ECO-WORTHY KP1100 Pure Sine Wave Solar Inverter Instruction Manual
- June 15, 2024
- ECO-WORTHY
Table of Contents
REMOTE MANUAL AND TEMPLATE
Mounting Inverter Remote
- Cut out the template at right and position it on the wall where remote is to be mounted.
- Mark the location of the four holes, and the square area to be cut out.
- Drill four holes, 1/8” (2.8 mm) diameter and remove the cutout area,
- Feed the phone jack connector and wire through the cutout hole in the panel and route the wire to the inverter phone jack receptacle.
- Position the remote switch assembly upright and secure to the panel using the four screws provided. Plug the phone jack into the inverter, Press the power button to turn the inverter on and off.
Mounting template
IMPORTANT:
Please read the instructinon manual carefully before running this power
inverter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>