MagZoom IC30D MagSafe Wireless Car Mount Charger User Manual
- June 15, 2024
- MagZoom
Table of Contents
USER MANUAL
MagZoom IC30D
Magnetic Wireless Car Charger
IC30D MagSafe Wireless Car Mount Charger
Scan the QR Code to Watch a Quick
Setup Video
izeehoo.com
Product Overview
Fitting Included in the Accessories Package
Operating Instructions
This magnetic car charger can work with all phone models, and please kindly check the instructions below 1o make it work properly for your phone.
- iPhone 12/13/14 mobile phone: Direct magnetic attraction is OK.
- iPhone 12/13/14 with original or magnetic case: Direct magnetic attraction is OK.
- Other situation (iPhone 12/13/14 with non-original non-magnetic case, or non-iPhone 12 bare machines/ phones with a mobile phone case) : it shall be used by matching up with metal rings.
Assembling the Metal Ring
There are two ways to paste the metal ring, which are listed as follows. Please choose between them according 1o your needs.
Note:
- To better protect your phone, it is recommended that you paste the metal ring on the back of the phone case.
- Please use this product with a phone case that has a flat and smooth back. It is not recommended to attach the metal ring 1o the phone case with rough surface (such as frosted surface)which would affect the adsorbing effect.
- Before use, please be sure to use the phone’s match-up card to aim at the position before the metal ring is pasted.
STEP1:
Use a cleaning wipe to clean the back of the phone (or phone case) where the
metal ring needs o be pasted.
STEP2:
Select the match-up card that matches the model of the phone (remove the
middle semicircle) and aim it at the edge at back of the phone / phone case.
STEP3:
Remove the release paper of the protective film, aim it at the half-circle of
the match-up card before pasting it on the back of the phone (or phone case).
Note: After pasting, squeeze out the air bubbles inside the protective
film.
STEP4:
Tear off the release paper of the metal ring and paste the metal ring onto the
protective film.
STEP5:
Press firmly along the metal ring to secure .
STEP6:
Remove the match-up card, and the installation is completed.
Important Reminders:
- Please wait 12 hours before use to ensure a strong-adhesive griping.
- The ring will only adhere to smooth PC or TPU without a Fingerprint. resistant coating.
Silicone/leather/glass case, heavy case and uneven case is NOT recommended.
How to make it charge effectively?
-
Choose the right adapter: a 9V/2A or 12V/2A QC 3.0 car charger adapter(NOT INCLUDED) is required for fast charging. ZEEHOO 45W car charger is RECOMMENDED.
• Using multiple ports on the same adapter can slow down charging. -
Choose the correct case: a case that is flat and up to 3mm is required for fast charging.
-
Use the included charging cable.
Specification
| Input | DC12V 1.25A 9V 2A 5V ****2A |
|---|---|
| Output | 5W/7.5W/10W/15W |
| Size (LWH) | 595926mm |
| Charging Induction Distance | ≤ 4mm |
| Charging Efficiency | 80% |
| Material | Aluminium+PC |
Compatibility
| Smartphone | Car Charger | Power Output |
|---|
iPhone 14 Series
iPhone 13 Series
iPhone 12 Series| +| 9V 2A
12V 1.5A
Quick Charge 3.0| =| 5W/7.5W/
10W/15W
Other Qi-enabled Phones| +| 9V 2A
12V 1.5A
Quick Charge 3.0| =| 5W/7.5W/
10W/15W
Scan the QR Code to Watch a Quick Setup Video
https://izeehoo.com/pages
/installation-information
Thank You
for purchasing @ zeehoo product.
Our goal is to make sure that you are completely satisfied with your purchase.
Please contact us at any time 24/7/365 if you have any questions, concerns or
need o submit ‘warranty request.
support@zeehoo.info
izeehoo.com/page/contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>