TRONXY Moore1 Mini Clay 3D Printer User Manual

TRONXY Moore1 Mini Clay 3D Printer

Product Information

Specifications

• Printing principle: LDM (Liquid Deposition Molding)
• Print volume:
• Printing accuracy : X/Y 0.00625mm, Z 0.00125mm
• Number of printheads : 1
• Nozzle diameter : 1.0-3.0mm (optional)
• Print speed: 10~40mm/s (30mm/s recommended)
• Moving speed: 60mm/s
• Consumables : Ceramic mud, porcelain mud, purple sand mud, etc.
• Ambient temperature:
• Slicing software: Cura
• Input format: . STL, .OBJ
• Output format: G-Code
• Connection method : TF card, USB disk, USB cable (for skilled users)
• Power input: 100V-240V AC, 50/60Hz
• Power output : 24V/4A DC
• Machine size : 355252370mm
• Machine weight : 7.5kg

Product Usage Instructions

Unpacking and Checking
When unpacking, please check the packing list to ensure that no parts are lost or damaged. If any parts are missing or damaged, please contact our after- sales personnel immediately and we will reissue them for you in the shortest time.

Environment Setup
Please use the machine in a ventilated, dry, clean, and flat environment.

Safety Precautions
The machine contains high-speed moving parts. Children are not allowed to use the printer alone. It is not recommended to use this 3D printer when unattended. In an emergency, you can turn off the power directly.

Warranty
If the user’s unauthorized modification or disassembly causes damage to the core components of the machine, the situation is not covered by the warranty.

SD Card
Video, software, and other related information are stored in the SD card. Please check.

User notes

• When unpacking, please check the packing list to ensure that no parts are lost or damaged. If any, please contact our after-sales personnel immediately and we will reissue them for you in the shortest time.
• Please use the machine in a ventilated, dry, clean and flat environment.
• The machine contains high-speed moving parts. Children are not allowed to use the printer alone. It is not recommended to use this 3D printer when unattended
• The recommended room temperaturefor 3D printers is 8 °C-40 °C, and the humidity is 20% – 80%. fused outside this temperature and humidity range, it may lead to a bad printing effect.
• In an emergency, you can turn off the power directly.
• If the user’s unauthorized modification or disassembly causes damage to the core components of the machine, the situation is not covered by the warranty.
• Video, software and other related information are stored in the SD card, please check.

Introduction

1. X axis system
2. Print head module
3. PC10-03 pneumatic connector
4. 3.5 inch full color touch screen
5. Printing platform
6. Power switch
7. Leveling nut
8. Tube
9. PC10-02 pneumatic connector C10
10. Barrel holder
11. M18 feeding screw
12. Transmission
13. 57 feeding motor
14. DC interface
15. 57 Extrusion motor interface
16. X axis slider
17. USB-A, USB-B and TF card sockets

Parameter

Print parameters

• Printing principle:
  LDM (Liquid Deposition Molding)

• Print volume:
  180 X 180 X 180 (mm)

• Printing accuracy:
  0.3-3.0mm

• Positioning accuracy:

  • X/Y: 0.00625mm,
  • Z:0.00125mm

• Number of printhead :
  1

• Nozzle diameter:
  1.0-3.0 mm (optional)

• Print speed
  10~40mm s30mm sis recommended)

• Consumables :
  Ceramic mud, porcelain mud, purple sand mud, etc

Temperature parameter

• Ambient temperature:
  8°C – 40°C

Software parameters

• Slicing software:
  Cura

• Input format:
  .STL .OBJ

• Output format:
  G-Code

• Connection method:
  TF card, USB disk, USB cable (for skilled users)|

Physical parameters

• Machine size:
  355252370 (mm)

• Machine weight:
  ~7.5kg

Packing list

1. Moore 1 Main Body *1

2. Screw print head *1

3. Barrel 0.5L *2

4. M18 extrusion screw * 1

5. Barrel holder * 1

6. Feed transmission *1

7. Piston *1

8. Tube 2 #*2

9. 57 Motor connection line * 1

10. Power adapter1+ Power cable 1

11. PC10-03 pneumatic connector * 1

12. PC10-02 pneumatic connector * 2

13. Firberglass plate * 2
    Accessories and tools

14. M410 screws 1

15. M420 screws 4

16. Clip *2

17. Plastic wrap * 1

18. Card reader and TF card * 1

19. USB cable *1

20. USBiE|Z#*1

21. A box ofnozzles *1

22. T-shaped allen wrench *1

23. Slotted screwdriver *1

24. Wrench* 1

25. L-shaped allen wrench * 4

26. Shovel *1

27. Clav *1

Installation

Install Screw Feeding Device
Remove the barrel fixing block and insert the M18 extrusion screw. Install the barrel fixing block back.

Install the Printhead and Feed Tube

Install Fiberglass Plate

Cable Connection

Platform Leveling

Slicing Software Settings

Model settings

Set the value as shown in the figure Select the option in the red circle

parameter settings

Precautions and Operations for Replacing the Barrel

Preparation of the Clay

Soak the clay : Put the clay into a basin, add some water (which needs to spread over the clay), soak the clay for 2.5 hours. (The complimentary clay can be used directly without adding water to soak.)

Mix/blend the clay: Take out the clay and mix it evenly by hand for 3-5 minutes. Shape the clay to be cylindrical by hand, and make sure its diameter is smaller than the barrel.

Load the clay into the barrel: Put the clav into the barrel

Squeeze the air/bubbles out

• Bubbles were found after filling the mud
• Beat the barrel up and down
• After squeezing out the bubbles
• Find a piece of paper with a certain thickness and beat it up and down several times to saueeze out the bubbles in the barrel.

Cautions after printing

Note : soak the printhead/nozzle in the water after printing to prevent the mud from drying and clogging the printhead

Shenzhen Tronxy Technology Co., Ltd
Address: No.23 Baoya Road, Danzhutou Community, Nanwan Street, Longgang District, Shenzhen, China, 518114.
Official Website : https://www.tronxy.com
Email: support@tronxy.com

FAQ’s

Can children use the printer alone?

No, children are not allowed to use the printer alone due to the high-speed moving parts.

What should I do in case of an emergency?

In an emergency, you can turn off the power directly.

What happens if I modify or disassemble the machine without authorization?

If the user's unauthorized modification or disassembly causes damage to the core components of the machine, the situation is not covered by the warranty.

References

• TRONXY is the Leading Manufacturers of 3D Printer Worldwide - TRONXY

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>