Oldowl 3581 USB-C Rechargeable Nose Hair Trimmer User Manual
- June 15, 2024
- Oldowl
Table of Contents
Oldowl 3581 USB-C Rechargeable Nose Hair Trimmer
PRODUCT STRUCTURE
CHARGING
- Plug in the USB cable into the external power adapter DC 5V (not included in package). Then plug in the USB port of the trimmer.
- For the first use, please charge 2 hours. Unplug the USB cable when charging is completed.
OPERATION AND USE
- Push the ON/OFF switch to turn ON/OFF the nose hair trimmer.
SPECIFICATIONS
| Product Name | Nose hair trimmer |
|---|---|
| Model Number | TC-3581 |
| Weight | 99g |
| Size | 1.3 x 1.3 x 5.6inch |
| Charging Standard | 5V-1A |
| Charging Time | 120min |
| Working Time | 120min |
| Battery Capacity | 500mAh |
| Operating Noise | Less than 50db |
MAINTENANCE
- Switch off the appliance.
- Rinse the trimming heads with lukewarm water. You can also use the cleaning brush to clean the trimming heads.
- Let all parts dry completely before you use the appliance again.
Remarks:
Clean the trimming heads immediately after use and when a lot of hair or dirt
has accumulated on the cutting elements. Do not wash the body!
TROUBLESHOOTING
| Abnormal Phenomenon | Possible Causes | Solution |
|---|
The appliance does not shave long hairs.
|
The hairs are too long.
| Pre-trim long hairs with the precision trimming head and move the appliance
against the direction of hair growth.
The appliance does not work as well as it should.| Hairs may be stuck in the
precision trimming head.| Clean the precision trimming head. See chapter
‘MAINTENANCE’.
The appliance pulls at the hairs.| You move the appliance too fast.| Do not
move the appliance too fast.
The appliance works, but the result is uneven.| 1. Low battery.
2. Press onto the skin too hard.
| 1. Charge 2 hours.
2. Do not press onto the skin too hard.
The appliance does not work.| 1. No battery.
2. Trimmer is installed incorrectly.
| 1. Charge 2 hours.
2. Install the trimmer again.
Warning: Do not attempt to repair the unit. No user-serviceable parts
inside.
Remark: Never use compressed air, scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to clean the appliance. Do not
tap on the cutting elements. Do not use any sharp objects to clean the cutting
elements.
IMPORTANT SAFETY INSTRUCTIONS READ AND KEEP THIS MANUAL FOR FUTURE REFERENCE
- This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
- Always check the appliance before you use it. Do not use the appliance if any of its parts are damaged or broken, as this may cause injury.
- Only use this appliance for its intended purpose as shown in the user
- If the appliance is subjected to a major change in temperature, pressure or humidity, let the appliance acclimate for 30 minutes before you use it.
- For hygienic reasons, the appliance should only be used by one person.
- Be careful with hot water when you clean the attachments. Always check if the water is not too hot, to prevent your hands from getting burnt.
- Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.
- Only charge the appliance in DC 5V, and 1A is our recommended.
- Use and store the appliance at a temperature between 0°C and 35°C.
- Do not expose the appliance to direct sunlight.
- Unplug the USB cable when charging is completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>