HPRT MT810 Wireless Portable Printers User Guide

: June 15, 2024
: HPRT

Table of Contents

HPRT MT810 Wireless Portable Printers
Product Information
Product Introduction
Product Usage Instructions
Product Introduction
Loading Paper Roll
Power On
Printing Wirelessly from Mobile Phone
Error Status
Product Parameters
FCC WARNING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HPRT MT810 Wireless Portable Printers

Product Information

Specifications

Model : MT810
Connection: Bluetooth, USB
Power Button : Yes
Cover-opening Button : Yes
LED Indicators: Connection Status LED, Operational Status LED

Product Introduction

Front View

Rear View

Accessories

USB Cable
Power Adapter
User Manual

Product Usage Instructions

Loading Paper Roll

Open the top cover by pushing the cover-opening buttons on both sides.
Remove the supplied paper roll and tear it apart along the edge.
Load the paper roll to the paper compartment again and pull some extra paper. Adjust the separator according to the paper width.
Close the top cover, ensuring both sides click into place.

Please use HPRT official thermal paper for a better printing experience.

Power On/Off
To power on the printer, hold down the power button for 3 seconds. To power off the printer, also hold down the power button for 3 seconds.

Printing from Windows PC

Download the App by scanning the provided QR code.
Open the App, click the “+” icon in the top right corner, choose the MT series, and then connect via ‘settings’.
Turn on Bluetooth on your mobile phone and select the corresponding MT810 device to connect.
Return to the App, open the document you want to print, and copy/share it to the App. Alternatively, select document printing on the App home page.
Adjust the document in the print preview and click the print icon on the top right corner to print.

Note: App operation shall be subject to the latest version.

Battery Charging
When the battery is low, the operational status LED will flash (red light flashes quickly). Please use the provided USB cable to charge the printer. If you continue printing, the printer may shut down automatically.

Charging Options:

Charging by PC: Connect the printer to a PC using the USB cable for charging.
Charging by Power Adapter : Connect the printer to a power adapter using the USB cable for charging.

Precautions

The best operating temperature is 0~40°C. If the environmental temperature is too low or too high, it may affect the print quality.
Use only HPRT official thermal paper to ensure print quality.
During printing, the printer head will heat up. Do not touch it to avoid burns.
Do not pull out the paper by force during printing as it may damage the printer.

LED Indicator and Buzzer Definitions

Status	LED Indicator	Buzzer
Print head temperature is too high	Red LED flashes rapidly	Beep-beep beep
Out of paper/paper jam/abnormal paper loading	Red LED flashes slowly	Beep

Frequently Asked Questions (FAQ)

Q: What should I do if the printer does not connect to my mobile phone?
A: Make sure Bluetooth is turned on your mobile phone and select the correct MT810 device to connect. If the issue persists, try restarting both the printer and your mobile phone.
Q: Can I use any thermal paper with this printer?
A: It is recommended to use HPRT official thermal paper for the best printing experience and to ensure print quality.
Q: How do I know when the battery is low?
A: The operational status LED will flash red quickly when the battery is low. Please charge the printer using the provided USB cable.

Product Introduction

Accessories

Loading Paper Roll

Open the top cover
Push the cover-opening buttons on both sides, and open the top cover.
Remove the paper roll
Remove the supplied paper roll and tear it apart along the edge.
Load the paper roll
Load the paper roll to the paper compartment again and pull some extra paper. Please adjust the separator according to the paper width.
Close the top cover
Close the top cover after loading paper. Please make sure both sides click into place.

Please use HPRT oﬃcial thermal paper for a better printing experience.

Power On

Power on
Hold down the power button for 3 seconds to start the printer.
To turn oﬀ the printer, also hold down the power button for 3 seconds.

Printing from Windows PC

Connect one side of the USB cable to the PC and the other side to the printer. Turn on the printer.
Download the printer driver from the website: https://www.hprt.com/HPRT-MT810
And then install it on the PC.
Choose the document you want to print from the PC and print it via printer “HPRT MT810”.

Tip: Default printing mode is page by page. You need to click the power button to continue printing after one page is printed. If you want to change default printing mode to continuous printing mode, please set it in the printer driver.

Printing Wirelessly from Mobile Phone

Download App
Scan the QR code below to download App. Connect with the printer

Open App, click “+” in the top right corner, choose MT series, and then“Connect via ‘settings’”. Turn on Bluetooth on the mobile phone, select “MT810-XXXX”(XXXX are last four digits of Bluetooth address), click it to connect.
Return to App, click the same model “MT810-XXXX” to connect.

Print

Open the document you want to print, and copy/share it to App.（Or select document printing on the App home page）.
Adjust it in the print preview, and click the print icon on the top right corner to print.
Note: App operation shall be subject to the latest version.

Battery Charging
When the battery is low, the operational status LED will ﬂash (red light ﬂashes quickly). Please use the matching USB cable to charge in time. If you continue printing, the printer may shut down automatically.

Precautions

The best operating temperature is 0℃~40℃, if the environmental temperature is too low or too high, the print quality may be aﬀected.
Please do not use the unoﬃcial paper roll to ensure the print quality.
During printing, the printer head will heat up ,do not touch it to avoid burns.
Do not pull out the paper by force during printing, or else it may damage the printer.

LED Indicator and Buzzer Deﬁnitions
01 Operational Status LED, which shows the printer status itself

Error Status

Status	LED Indicator	Buzzer
Print head temperature is too high	Red LED ﬂashes rapidly	“Beep-beep beep-”
Out of paper/paper jam/ abnormal paper loading	Red LED ﬂashes slowly	“Beep

beep beep-”
Voltage/Battery is too low| Red LED ﬂashes rapidly| “Beep-beep-beep-”
Printer cover is not closed| Red LED is lighting| ⸺ ⸺

Printer Status

Status	LED Indicator
Power on	White LED is lighting
Power oﬀ	Light oﬀ
Printing	White LED ﬂashes slowly
Sleeping	Blue LED is lighting

Connection Status LED, which shows the connection status of printer

Status	LED Indicator
In Bluetooth connection	Blue LED is lighting
Bluetooth data receiving	Blue LED ﬂashes rapidly
In USB connection	Green LED is lighting
USB data receiving	Green LED ﬂashes rapidly
No connection currently	Light oﬀ

Product Parameters

Product Name： Mobile Printer
Product Model： MT810
Battery Parameter： 7.4V, 2500mAh
Dimensions： 280 x 95 x 51.4mm
Weight： About 1kg (without accessories)
Operating Temperature： 0℃~40℃
Executive Standard： GB4943.1-2011, GB/T9254-2008, GB 17625.1-2012

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Please Scan QR Code to Get 24h After-sales Technical Support Service

Search “HPRT Oﬃcial ”on YouTube to Get Instruction Videos

Search “HPRT Oﬃcial ”on Facebook to Get Extra Consumables of Printer

Xiamen Hanin Electronic Technology Co., Ltd.