artika PDT-PEC-BG LED Pendant Light Instruction Manual
- June 15, 2024
- artika
Table of Contents
artika PDT-PEC-BG LED Pendant Light
Specifications
- Product Name: LED pendant light – Peyton TM
- Model: Peyton MR
- Revision: 11-10-2023
Product Usage Instructions
Important Safety Information
Before installing and using the LED pendant light, please read
and understand the following safety instructions:
- Risk of electrical shock. Turn off the breaker at the panel before installation.
- Switch off the main electrical supply from the fuse box/circuit breaker before installing or performing any maintenance.
- Do not use the product outdoors.
- If using a dimmer, ensure it is LED compatible.
Installation
To ensure proper installation, follow these steps:
Mounting Bracket Installation
- Attach the mounting bracket (A) to the junction box using the provided junction box screw (J).
- Secure the canopy base (D) to the mounting bracket using the canopy screw (K).
Fixture Assembly
- Assemble the LED pendant fixture (I) with the rod (E).
- If applicable, assemble Cube 1 (K) or Cube 2 (L) instead of the rod.
- Attach the assembled fixture to the canopy base (D).
Height Adjustment
- To adjust the height, loosen the screws (F) on the canopy base (D).
- Slide the fixture up or down to the desired height.
- Tighten the screws (F) to secure the fixture in place.
Canopy Wire Connection
Connect the wires from the canopy base (D) to the corresponding wires:
- Yellow wire to yellow wire
- Red wire to red wire
- White wire to white wire
Connecting the Wires and Canopy Installation
- Connect the wires as instructed in the previous step.
- Peel off the adhesive backing from the adjustable white technology (AWT) component (13).
- Attach the AWT component to the canopy base (D) for adjustable color temperature.
Important Notes
- The installer and/or user must read, understand, and follow all instructions before installation.
- It is recommended to have a certified electrician install the product.
- Failure to follow instructions may void the warranty.
FAQ (Frequently Asked Questions)
Q: Can I use this light fixture outdoors?
A: No, this product is not suitable for outdoor use.
Q: Is it necessary to use a dimmer compatible with LED lights?
A: Yes, if you plan to use a dimmer, it must be LED compatible to avoid
any issues.
Q: What should I do if I need customer support?
A: For customer service inquiries, you can contact us Monday to Friday
from 9 am to 5 pm EST at 1-866-661-9606
or email us at support@artika.com. You can also visit our website at
www.artika.com.
LED pendant light – Peyton TM
INSTRUCTION MANUAL
IMPORTANT: READ CAREFULLY AND KEEP.
INCLUDED HARDWARE
STEP-BY-STEP INSTALLATION
CAUTION
Switch off the main electrical supply from the fuse box/circuit breaker
before installing the unit or doing any maintenance.
Do not use outdoor.
- If using a dimmer,it must be LED compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used.
If instructions are not followed,the manufacturer will not be held responsible
for any problems or product malfunction. Failure to follow installation and/or
operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician.
In some states or provinces, it is a legal requirement for this type of
product to be installed by a certified electrician, according to the
electrical and building codes effective in the region where the unit is used.
MOUNTING BRACKET INSTALLATION
FIXTURE ASSEMBLY
HEIGHT ADJUSTMENT
CANOPY WIRE CONNECTION
CONNECTING THE WIRES AND CANOPY INSTALLATION
CANOPY INSTALLATION
ADJUSTABLE WHITE TECHNOLOGY
CANADA (IC)
Operation is subject to the following two conditions:
- this device may not cause interference,and
- this device must accept any inteference, including inteference that may cause undesired operation of the device.
USA (FCC)
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received,including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Artika For Living Inc. is proud to offer you a three (3) years limited
warranty on manufacturing defects from the date of purchase for residential
use only. The warranty is extended to the original owner in USA and Canada and
is non-transferable. It does not apply to retailers, commercial applications
or establishments. The original sales receipt is required for all warranty
claims. The remedy under this limited warranty shall be product or part
replacement at Artika’s discretion as provided herein and cannot exceed the
original purchase price.
This warranty is valid only on products installed in accordance with the
building code and laws effective in the region where the unit is used as well
as in accordance with the provided instruction manual. It does not cover
products installed incorrectly or subjected to abnormal use. Product(s) or
component part(s) may be required to be returned for inspection and
verification.
Normal wear and tear, misuse, negligence, vandalism, improper maintenance
(surface damage due to chemical interaction or cleaning agents including, but
not limited to, scouring pads, use of cleaners containing abrasives, alcohol
or other organic solvents) improper handling, accident,abuse, fire, flood,
theft, acts of God,neglect, or alteration of the product will not be covered
under this limited warranty. It excludes any accessories that accompany the
product including but not limited to bulbs or batteries.
The warranty does not cover handling,labor, transportation, or any other cost
associated with the installation or replacement of the product. This limited
warranty is valid in the country of purchase and by Artika authorized
retailers only.
Artika for Living Inc. will not be held responsible for any direct or
consequential damages or injuries related to the use of this product arising
from improper use or installation of this product.
Please visit www.artika.com to discover more about
Artika for Living Inc.
Artika For Living Inc.
1756, 50th Avenue
Montréal (Lachine), Québec
Canada H8T 2V5
1-866-661-9606
support@artika.com
www.artika.com
Customer Service
Monday to Friday
9 am – 5 pm EST