maono DM30 USB Gaming Microphone Instruction Manual

Maono Link Instruction manual

Getting Started

Connect tothe Computer

Before you can start using it, you need to do a few things.

1. Download and install Maono Link on your computer
2. Plug your DM30,PD400X (or other device that supports Maono Link) into your computer
3. Connect your headphones to the 3.5MM jack of your microphone
4. Open your Maono Link and click on the product icon to enter the main control panel

Main Meau

1. Select a product to go to operation page.
2.  Click the icon to go to Maono social media page.
3.  Setting

Introduction to the settings page

1. Check for software updates
2.  Change languages. Select Maono social media in bottom left area.

Basic Functions

Basic functions

1. Microphone audio processing features, RGB light customization, real-time control of microphone.
2. Fine mic gain headphone volume control, onebutton mute.
3. Four microphone tone options.
4. RGB light on/off switch, brightness adjustment, color selection, and display mode.

Advanced Function

Select Pro to get more advaced audio processing features

4 EQ modes

1.  Flat ：delivers original sound.

2. High-pass ： reduces low-frequency noises.

3. Presence boost ：boosts the mid-frequency vocal and instrument sound.

4. High-pass and presence boost.

5. Limiter ：prevents distortion caused by high volume.
   Function Definition: The limiter can control the peak level below the threshold. Processors that can control the transient level and signal peak level below the threshold level can be called a limiter.

6.  Compressor：limits the dynamic range of audio and prevents overload.

7. RBG light ：on/off, brightness, color and display mode are also available in Pro mode.

Firmware online upgrade

1. Check for Firmware Update ：
   Can be updated to the latest firmware

2. Factory Reset ：
   You can reset the microphone and restore the factory settings

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>