amazon basics B07THYV6HC 3 Speed Oscillating 20 inch Table Desk Fan User Manual
- June 15, 2024
- amazon basics
Table of Contents
amazon basics B07THYV6HC 3 Speed Oscillating 20 inch Table Desk Fan
Contents
Before getting started, ensure the package contains the following components
You will need
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be included.
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to perso11s
including the following
- Ensure that the fan is switched off from the supply mains before removing the guard.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Intended Use
- This product is intended for household use only. It is not intended for commercial use.
- This product is intended to be used in dry indoor areas only.
- No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.
Before First Use
- Check for transport damages.
- Before connecting the product to the power supply, check that the power supply voltage and current rating correspoods with the power supply details shown on the product rating label.
A DANGER
Risk of suffocation! Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Assembly
-
Step 1
NOTICE I Take out the fixing screw located in the fixing ring (F).- Insert the front notch of the main body (A) into the base’s (B) indent.
- Push the main unit (A) down until it clicks in place.
-
Step 2
- Remove the fixing ring (F) from the main unit (A).
- Connect the rear guard (E) with the main unit (A). Align the rear guard’s holes with the main unit’s guide nodes.
- Secure the rear guard (E) with the fixing ring (F).
-
Step 3
- Place the blade (C) on the shaft. Align the axle shaft pin with the groove on the rear side of the blade (C).
- Secure the connection by turning the cap nut (G) anti-clockwise.
-
Step 4
- Place the front guard (D) onto the bottom hook of the rear guard (E).
- Use the pin holes on top as guides to align both guards (D) and (E).
-
Step 5
- Secure the both guards (D) and (E) with the screw.
- Close the locking brackets on both sides of the guards (D) and (E).
Tilt adjustment
To adjust the tilt, use the handle located on the rear guard (E) and pull
upwards or downwards.
Operation Switching on/off
- Plug in the product to the electrical outlet.
- Place the product on a flat and stable surface.
- To switch on, press one of the speed buttons 1, 2 or 3.
- To switch off, press the O button and unplug the product from the electrical outlet.
Setting the speed
Press the speed button 1, 2 or 3 to select the speed.
Setting the
oscillation
The product features automatic oscillation for better airflow distribution .
- To switch on the oscillation, push the oscillation knob down.
- To switch off the oscillation, pull the oscillation knob up.
Vertical position adjustment
- Loosen the tightening knob on the side of the main body (A).
- Adjust the fan to the appropriate vertical position.
- Secure the tightening knob.
Cleaning and Maintenance
- WARNING Risk of electric shock! To prevent electric shock, unplug before cleaning.
- WARNING Risk of electric shock! During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.
Cleaning
- To clean the product, wipe with a soft, slightly moist cloth.
- Regularly remove dust and dirt from the guards using a vacuum cleaner.
- Dry the product after cleaning.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
Maintenance
- Store the product in a cool and dry place away from children and pets, ideally in original packaging.
- Avoid any vibrations and shocks.
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to
minimize the impact of electrical and electronic goods on the environment, by
increasing re-use and recycling and by reducing the amount of WEEE going to
landfill. The symbol on this product or its packaging signifies
that this product must be disposed separately from ordinary household wastes
at its end of life. Be aware that this is your responsibility to dispose of
electronic equipment at recycling centers in order to conserve natural
resources. Each country should have its collection centers for electrical and
electronic equipment recycling. For information about your recycling drop off
area, please contact your related electrical and electronic equipment waste
management authority, your local city office, or your household waste disposal
service.
Specifications
Feedback and Help
Love it? Hate it? Let us know with a customer review.
Amazon Basics is committed to delivering customer-driven products that live up
to your high standards. We encourage you to write a review sharing your
experiences with the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>