SEBSON MIRROR CAB 5W LED Bathroom Mirror Light Instructions

SEBSON MIRROR CAB 5W LED Bathroom Mirror Light

Specifications

• Product Name: MIRROR_CAB_5W 1
• Input Voltage: 230V AC
• Power: 5W
• Luminous Flux: 400lm
• Color Temperature: 4,000K
• Protection Class: IP44 II

Product Usage Instructions

General Safety Information:

• Installation of this product should only be done by a qualified person according to the valid regulations for electrical installation.
• In case of damages or contact with water, immediately turn off the product without tension and ensure that a restart is no longer possible.
• Keep the product away from children and animals as the packaging contains small parts that can be swallowed.
• Avoid setting up the light beam directly at people or animals to prevent fire or eye damage. Do not look directly into the light  source.
• Do not connect a dimmer to the product as it may cause damage to the lamp.
• Do not cover the light with heat insulating materials as it may damage the LED.
• The manufacturer does not accept responsibility for injuries or damage resulting from improper use of the product.
• Any modifications to the product are not allowed and will invalidate the warranty claim.

Installation Instructions:

Danger: Before installing, make sure that the circuit is interrupted!

1. Mount the mirror luminaire on cabinets or shelves according to the desired location.
2. Use the provided screws to securely fix the mirror light in place.

Cleaning Instructions:

Danger: Before cleaning the product, interrupt the power circuit by turning off the circuit breaker.
Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to gently clean the surface of the mirror luminaire. Avoid using abrasive materials or harsh chemicals that  may damage the product.

Frequently Asked Questions (FAQ):

• Q: Can I replace the built-in luminous in the light?
  A: No, the built-in luminous in the light cannot be replaced.

• Q: Can I modify the product?
  A: No, any modifications to the product are not allowed as it may affect the proper and safe functioning of the device and invalidate the warranty claim.

• Q: Can I connect a dimmer to the product?
  A: No, connecting a dimmer to the product may cause damage to the lamp. Avoid doing so.

• Q: What should I do if the product gets damaged or comes into contact with water?
  A: In case of damages or contact with water, immediately turn off the product without tension and ensure that a restart is no longer possible. Seek professional assistance if needed.

Thank you for choosing a product of SEBSON. Read the instructions carefully and keep them for looking up before start-up this product. A long and failure- free operation can only be guaranteed if the installation and start-up is done properly. Before starting up this product, please check for external damage. In case of visible external damage we immediately dis-advise the start-up of this product! Please remove all packaging material of this product before the first start-up an and check the content for completeness!

Intended use

This SEBSON mirror luminaire is suitable for mounting on cabinets or shelves, for example. Due to its nature, it has a protection class of IP44 and is therefore suitable for use in damp rooms.

Scope of delivery

• 1 Mirror light
• 2 Screws for fixing

General safety information

Danger : The installation of this product may be done only by a qualified person according the valid regulations for electrical installation!
Danger : In case of damages or contact with water turn off this product immediately without tension and make sure that a restart is no longer possible!
Danger of suffocation : Keep this product away from children and animals! The packaging contains small parts that can be swallowed!
Caution: Please set up the light beam of the light never directly at people or animals to prevent fire damage or eyes damage and avoid looking directly into the light source!

• An exchange of the built-in luminous in the light is not possible!
• The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
• Do not connect a dimmer as this may cause a damage to the lamp.
• Do not cover the light with heat insulating materials! As a result of a strong heat development the LED can be damaged!
• The manufacture does not accept any responsibility for injuries or damage resulting from improper use of this product!
• Any other use than the description may result in damage to the product. So the dangers are such as electric shock, short circuit, fire etc.
• We reserve the right to make changes to the product, the packaging or the operating instructions as well as printing errors.
• Protect the product from external damage, heavy dirt, moisture and excessive heat!
• In order that the warranty claim does not expire please use only the supplied items. Repairs may only be done by an expert and only by using original spare parts!
• In commercial institutions, the accident prevention regulations of the professional trade association for electrical equipment and facilities must be adhered to.

Instruction for installation

Danger : Before installing make sure that the circuit is interrupted! For installation, the work on the mains voltage is required. Remove the associated mains fuse or deactivate the switch fuse! Check by using a voltage tester if the line is de-energized. Make sure that the current circuit will not closed during the installation! There is danger to life here!
Attention : Before drilling the mounting holes, make sure that there are no gas, electricity or water pipes at the drilling location that could be damaged by this!

• This product is only suited for indoor-use and not for outdoor-use!
• Plan a minimum distance of 50cm between the illuminated area and the lamp.
• Observe the safety instructions and technical data before installing this product!
• Note on installation:
  • L: Live wire (black or brown)
  • N: Neutral conductor (blue or grey)

Technical Data

• Operating voltage: 230V AC
• Nominal wattage: 5W
• Nominal luminous flux: 400lm
• Rated color temperature: 4.000K
• Electrical protection:  IP44
• Protection class: II
• This product contains a light source of energy efficiency class G.

Information for private households

The Electrical and Electronic Equipment Act (WEEE) contains a large number of requirements for the handling of electrical and electronic equipment. The most important ones are summarised here.

1. Separate collection of waste equipment
   Old, worn-out or defective electrical and electronic equipment is referred to as waste equipment. These devices must not be disposed of in the normal household waste or together with the residual waste. The devices should be transferred to special collection and return systems.

2. Batteries and rechargeable batteries as well as illuminants
   As a rule, owners of WEEE shall separate spent batteries and accumulators that are not enclosed in the WEEE, as well as light sources that can be removed from the WEEE without causing damage, from the WEEE before handing it over to a collection point. This does not apply if WEEE is prepared for reuse with the participation of a public waste management authority.
   Batteries or rechargeable batteries that contain harmful substances are marked with the symbol of a crossed-out dustbin and must not be disposed of in household waste. Below the dustbin symbol is the chemical name of the pollutant – in the example below “Cd” for cadmium. “Pb” stands for lead, “Hg” for mercury:
   If disposed of improperly, the substances contained in the batteries may cause hazards to health and the environment. The hazards are averted by the separate collection and proper disposal of used batteries

3. Options for returning old appliances
   Owners of WEEE from private households can hand it in free of charge at the collection points of the public waste management authorities or at the take- back points set up by manufacturers or distributors.

4. Data privacy notice
   Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the end-of-life devices to be disposed of.

5. Meaning of the “crossed-out dustbin” symbol
   The symbol of a crossed-out dustbin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Cleaning

Danger : Before start cleaning the product interrupt the current circuit by switching off the circuit breaker or unscrew the fuse! Use a slightly moistened cloth for cleaning. In order not to damage the product, it is essential to avoid water penetrating into the housing! Never clean the device under running water! Do not use solvent-containing cleaner for cleaning.
SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
support@sebson.de
VAT-Nr.: GB179436663
WEEE-Reg.-ID.: 500617
Adress: SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
Mail: support@sebson.de
UST-IDNr.:DE246981805
WEEE-Reg.-Nr.: DE 78960174
Batterien Reg. Nr.: DE 11339413
Verpackung Reg. Nr.: DE 4848624667044

References

• Informationen für Verbraucher | SEBSON

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>