SEBSON MIRROR CAB 8W LED Bathroom Mirror Light Instructions
- June 15, 2024
- SEBSON
Table of Contents
SEBSON MIRROR CAB 8W LED Bathroom Mirror Light
Specifications:
- Product Name: MIRROR_CAB_8W 1
- Input Voltage: 220-240V AC
- Power Consumption: 8W
- Luminous Flux: 600lm
- Color Temperature: 4,000K
- Protection Class: IP44 II
Product Information:
The SEBSON mirror luminaire, model MIRROR_CAB_8W 1, is designed for mounting on cabinets or shelves. It can also be easily mounted on cabinet doors. The luminaire has a protection class of IP44, making it suitable for use in damp rooms.
Scope of Delivery:
- 1 Mirror light
- 2 Screws for fixing
General Safety Information:
Please read and follow the safety instructions below before using the product:
- Danger: The installation of this product should only be done by a qualified person according to the applicable electrical regulations.
- Danger: In case of damages or contact with water, turn off the product immediately and ensure that it cannot be restarted.
- Danger of suffocation: Keep this product away from children and animals as it contains small parts that can be swallowed.
- Caution: Avoid directing the light beam directly at people or animals to prevent fire damage or eye damage. Do not look directly into the light source.
- Do not attempt to exchange the built-in luminous in the light.
- Modifying the product is not allowed and may compromise its proper functioning and warranty.
- Do not connect a dimmer to the luminaire as it may cause damage.
- Do not cover the light with heat insulating materials to prevent LED damage.
- Protect the product from external damage, heavy dirt, moisture, and excessive heat.
- Only use the supplied items to ensure warranty coverage.
- Repairs should only be done by an expert using original spare parts.
- Follow the accident prevention regulations of the professional trade association for electrical equipment and facilities in commercial institutions.
Installation Instructions (Fig 1):
Before installing the luminaire, ensure that the circuit is interrupted.
Cleaning:
Danger: Before cleaning the product, disconnect the power supply by
switching off the circuit breaker.
Contact Information:
SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
Mail: support@sebson.de
UST-IDNr.: DE246981805
WEEE-Reg.-Nr.: DE 78960174
Batterien Reg. Nr.: DE 11339413
Verpackung Reg. Nr.: DE 4848624667044
Frequently Asked Questions:
-
Q: Can this mirror luminaire be used in bathrooms?
A: Yes, this luminaire has a protection class of IP44 and is suitable for use in damp rooms. -
Q: Can I replace the built-in luminous in the light?
A: No, the built-in luminous in the light cannot be replaced. -
Q: Can I connect a dimmer to this luminaire?
A: No, connecting a dimmer may cause damage to the lamp. -
Q: Can I cover the light with heat insulating materials?
A: No, covering the light with heat insulating materials may result in LED damage. -
Q: What should I do if the product gets damaged or comes into contact with water?
A: Turn off the product immediately without tension and make sure that a restart is no longer possible.
Thank you for choosing a product of SEBSON. Read the instructions carefully and keep them for looking up before start-up this product. A long and failure- free operation can only be guaranteed if the installation and start-up is done properly. Before starting up this product, please check for external damage. In case of visible external damage we immediately dis-advise the start-up of this product! Please remove all packaging material of this product before the first start-up an and check the content for completeness!
Intended use
This SEBSON mirror luminaire is suitable for mounting on cabinets or shelves, for example. It can also be easily mounted on cabinet doors. Due to its nature, it has a protection class of IP44 and is therefore suitable for use in damp rooms.
Scope of delivery
- 1 Mirror light
- 2 Screws for fixing
General safety information
Danger: The installation of this product may be done only by a qualified
person according the valid regulations for electrical installation!
Danger: In case of damages or contact with water turn off this product
immediately without tension and make sure that a restart is no longer
possible!
Danger of suffocation: Keep this product away from children and animals!
The packaging contains small parts that can be swallowed!
Caution : Please set up the light beam of the light never directly at
people or animals to prevent fire damage or eyes damage and avoid looking
directly into the light source!
- An exchange of the built-in luminous in the light is not possible!
- The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
- Do not connect a dimmer as this may cause a damage to the lamp.
- Do not cover the light with heat insulating materials! As a result of a strong heat development the LED can be damaged!
- The manufacture does not accept any responsibility for injuries or damage resulting from improper use of this product!
- Any other use than the description may result in damage to the product. So the dangers are such as electric shock, short circuit, fire etc.
- We reserve the right to make changes to the product, the packaging or the operating instructions as well as printing errors.
- Protect the product from external damage, heavy dirt, moisture and excessive heat!
- In order that the warranty claim does not expire please use only the supplied items. Repairs may only be done by an expert and only by using original spare parts!
- In commercial institutions, the accident prevention regulations of the professional trade association for electrical equipment and facilities must be adhered to.
Instruction for installation
Danger : Before installing make sure that the circuit is interrupted! For
installation, the work on the mains voltage is required. Remove the associated
mains fuse or deactivate the switch fuse! Check by using a voltage tester if
the line is de-energized. Make sure that the current circuit will not closed
during the installation! There is danger to life here!
Attention : Before drilling the mounting holes, make sure that there are
no gas, electricity or water pipes at the drilling location that could be
damaged by this!
- This product is only suited for indoor-use and not for outdoor-use!
- Plan a minimum distance of 50cm between the illuminated area and the lamp.
- Observe the safety instructions and technical data before installing this product!
- Note on installation:
- L: Live wire (black or brown)
- N: Neutral conductor (blue or grey)
Technical Data
- Operating voltage: 220-240V AC
- Nominal wattage: 8W
- Nominal luminous flux: 600lm
- Rated color temperature: 4.000K
- Electrical protection: IP44
- Protection class: II
This product contains a light source of energy efficiency class G.
Information for private households
The Electrical and Electronic Equipment Act (WEEE) contains a large number of requirements for the handling of electrical and electronic equipment. The most important ones are summarised here.
-
Separate collection of waste equipment
Old, worn-out or defective electrical and electronic equipment is referred to as waste equipment. These devices must not be disposed of in the normal household waste or together with the residual waste. The devices should be transferred to special collection and return systems. -
Batteries and rechargeable batteries as well as illuminants
As a rule, owners of WEEE shall separate spent batteries and accumulators that are not enclosed in the WEEE, as well as light sources that can be removed from the WEEE without causing damage, from the WEEE before handing it over to a collection point. This does not apply if WEEE is prepared for reuse with the participation of a public waste management authority.
Batteries or rechargeable batteries that contain harmful substances are marked with the symbol of a crossed-out dustbin and must not be disposed of in household waste. Below the dustbin symbol is the chemical name of the pollutant – in the example below “Cd” for cadmium. “Pb” stands for lead, “Hg” for mercury:
If disposed of improperly, the substances contained in the batteries may cause hazards to health and the environment. The hazards are averted by the separate collection and proper disposal of used batteries. -
Options for returning old appliances
Owners of WEEE from private households can hand it in free of charge at the collection points of the public waste management authorities or at the take- back points set up by manufacturers or distributors. -
Data privacy notice
Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the end-of-life devices to be disposed of. -
Meaning of the “crossed-out dustbin” symbol
The symbol of a crossed-out dustbin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.
Cleaning
Danger : Before start cleaning the product interrupt the current circuit by switching off the circuit breaker or unscrew the fuse! Use a slightly moistened cloth for cleaning. In order not to damage the product, it is essential to avoid water penetrating into the housing! Never clean the device under running water! Do not use solvent-containing cleaner for cleaning.
SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
support@sebson.de
VAT-Nr.: GB179436663
Adress : SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund
Germany
Mail: support@sebson.de
UST-IDNr.:DE246981805
WEEE-Reg.-Nr.: DE 78960174
Batterien Reg. Nr.: DE 11339413
Verpackung Reg. Nr.: DE 4848624667044
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>