MANVINS BR150 Robot Vacuum and Mop Combo Instruction Manual
- June 15, 2024
- MANVINS
Table of Contents
MANVINS BR150 Robot Vacuum and Mop Combo
Specifications
- Package Contents:
- Robot Vacuum
- Charging Base
- 2 AAA batteries for Remote Control
- Remote Control
- Adapter
- Mop Accessories
- Water tank
- Dust Box & Filter
- Cleaning Brush
- Instruction Manual
- 2 Side Brushes
- 4 Water Tank Filter Cottons
- Host:
- Front of the host:
- Recharge button
- Infrared buffer anti-collision board
- Power button Machine panel Water tank button
- Back of the main unit:
- Anti-drop Sensors
- 2 Side brushes
- 2 Drive wheels
- Dust box
- 2 charging contacts
- Universal wheel
- Machine Battery
- Remote Control:
- Pause/Sleeping button
- Automatic cleaning
- Pause/Start button
- Direction control button
- Zig-zag cleaning
- Suction adjustment button
- Edge cleaning
- Charging Base:
- Recharge button
- Spot cleaning button
- Water output adjustment
- Dust box:
- Dust filter cotton
Product Usage Instructions
Precautions for Product Use
Before using the robot vacuum cleaner, please ensure the following:
- Remove any objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects from thearea to be cleaned. This will prevent the robot from dragging or pulling off objects from tables or shelves.
- If the room to be cleaned has a balcony, use a physical barrier to prevent access to the balcony and ensure safe operation of the robot.
Safety Rregulations
If you encounter any problems during use, please contact our after-sales
service center: EMAIL, and there will be professionals to answer your
questions.
Due to the need for continuous product improvement, this information product
is subject to the actual product, and our company reserves the right to update
the product.
Note:
- The problems that may occur during the cleaning of the product should be eliminated in time. Clean the power cords and small items on the ground to prevent the product from being blocked during the cleaning process. Fold the fringe of the carpet under the carpet, and make sure that the hanging curtains, tablecloths, etc. do not touch the ground.
- If there is a hanging environment such as stairs, please test the product first to see if it can detect the edge of the hanging area without falling. A protective fence or other protective measures should be set at the edge of the suspended area to prevent the product from falling. Make sure that the fence or other fire prevention measures will not cause personal injury such as tripping.
- Please follow the instructions in the manual to use the product. Only use product accessories recommended or sold by the manufacturer.
- Make sure that the power supply voltage matches the voltage marked on the charging stand.
- Ensure that the dust box, filter material, etc are installed in place before using the product.
- If the power cord is damaged, to avoid danger, it must be replaced by a professional from the manufacturer or maintenance department.
- Please turn off the product switch before cleaning and maintaining the product.
- The socket must be unplugged from the power socket before cleaning and maintaining the product.
- Before discarding the product, please remove the product from the charging stand, turn off the power switch of the product, and take out the battery.
- If you do not use the product for a long time, please power off the product.
- The product cannot be used by children under the age of 12 or people with mental disorders. If you need to use it, please do it under the supervision of a guardian. Please do not allow children to ride on the product or play with the product as a toy.
- Use it only in an indoor home environment. Do not use it outdoors, as commercial or industrial products.
- Please do not use the product in the room where the baby sleeps.
- Please do not use the product with a damaged power cord or power socket. Please do not use the product when it is dropped, damaged, used outdoors or cannot work normally due to water ingress. To avoid injury, the product should be repaired by the manufacturer or after-sales service.
- Please follow the instructions in the manual to use the product. The company is not responsible for any loss and damage caused by improper use.
- Do not place the product near cigarette butts, lighters, and other smoldering fires.
- Do not use this product in a wet environment(eg: bathroom) .
- To prevent tripping, please inform others of the house when this product works.
- The temperature used for this product is 0 to 40 degrees Celsius. Do not use this product in a high-temperature environment.
Warning:
- Only use the original battery and charging base specially equipped by the manufacturer, and it is strictly forbidden for users to change the battery and charging base privately. If you suspect that the battery or charging base is damaged, please contact the manufacturer’s professionals for replacement.
- It is forbidden to use the product in an environment with open flames or fragile objects.
- It is forbidden to use in extremely hot (above 40°C) or extremely cold (below 0°C) environments.
- It is forbidden for hair, clothes, fingers and other parts of the human body to approach the openings and operating parts of the product.
- It is forbidden to use products on wet or stagnant ground.
- It is strictly forbidden for the product to absorb anything that may block the product, such as stones, waste paper, etc.
- It is forbidden for products to absorb any inflammable substances, such as petrol, toner, and toner for printers or photocopies. Prohibit the use of products in clean areas with flammable items.
- It is forbidden for the product to absorb any burning items, such as cigarettes, matches, ashes and other items that may cause a fire.
- It is forbidden to place objects in the mouthpiece. Do not use the product when the suction port is blocked. Clean up dust, lint, hair, etc. at the suction port to ensure smooth air circulation at the suction port.
- Handle the power cord carefully to avoid damage. It is forbidden to use the power cord to drag the product and the product charging base. Do not use the power cord as a handle. It is forbidden to clamp the power cord in the door gap. It is strictly forbidden to pull the power cord at sharp corners and corners. It is forbidden to operate the product on the power cord, and the power cord should be kept away from heat sources.
- Do not use damaged charging bases.
- Even if the product is severely damaged, it is prohibited to burn the product, otherwise, the battery of the product may explode.
Product Composition
Package contents
Part name
(1)About the host
(2) About the remote control
(3) About the accessories
Use of the Product
Precautions for product use
Before using Robot, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects. If the Robot passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf.
If the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.
First prepare
Remove shield：
Please remove the protective materials on the main unit and charging base
before use
Install the side brush correctly
Host charging
-
a. Find a suitable location to place the charging base
After connecting the charger, the indicator light on the charging stand will be always on.
Place the charging base on a flat ground against the wall. Do not place objects within 20 inches to the left and 60 inches in front.- TIP: If there is a mirror or other reflective objects near the charging base, you need to cover the 3 inches of the bottom part.
-
b.First take out the water tank and the mopboard, then turn on the main unit to charge.
-
c. Connect the power supply
-
D. Place the host on the charging stand to charge
(The indicator light flashes during charging Flashing; the indicator light is always on
when fully charged. The charging time is about 5 hours)
When the machine is cleaning, the host can sense that its own power is insufficient, automatically start to return to the charging mode, and automatically find the charging dock to charge. You can also use the remote control’s return to charge button to instruct the host to start returning to the charging mode.
TIP: If there is a mirror or other reflective objects near the charging base, you need to cover the 3 inches of the bottom part.
Install the water tank
- a. Open the water tank plug and inject clean water.
- b. Cover the water tank plug and install the water tank back to the host.
Install the mop board
-
a. Please wet the cloth completely and install it on the mopboard
-
b. Nest the white edge of the mop on the mopboard
-
c. Install the mopboard on the host TIP:
- Before using the mopping function, be sure to install the mopping board to the designated position.
- Please do not use the mopping function on the carpet, this will cause the mopping to fail.
- Please be sure to remove the mop accessories when using the vacuum function.
Host Operation
Power on
Press and hold the host start/pause button for 2-3 seconds in the off state,
and the power on is successful.
-
Pause: When the host is working, short press the host start/pause button or the remote control pause button to pause the host.
-
Wake-up: Within 10 minutes of the main unit being suspended, if short press the main unit start/pause button or remote control start/pause button again, the main unit can continue cleaning.
-
Sleep: If the host is suspended for more than 10 minutes, the host will enter sleep mode (the host indicators are all off). You can short-press the host start/pause button or the remote control start/pause button to wake up the host first.
-
Shutdown: First, the main unit pauses work, then long press the main unit start/pause button, and finally the main unit indicator light will go out, and the machine shuts down successfully.
TIP: -
When starting the cleaning job for the first time, please make sure that the product is fully charged.
-
After the robot vacuum cleaner completes its operation, you are advised not to shut down the robot vacuum cleaner. Keep the robot vacuum cleaner in the charging status so that it can work better in the next operation.
Cleaning mode and Usage settings
a. Automatic cleaning
The Robot Vacuum performs random cleaning for 90 minutes and automatically recharges after the cleaning is completed.
Setting method:
In standby mode, short press the start/pause button, or the button on the
remote control, and the robot enters the Automatic cleaning mode. b. Spot
cleaning
First, clean in a spiral clockwise from the inside to the outside. After the
maximum radius is 24 inches, clean in a spiral from the outside to the inside,
and finally return to the starting position and finish the cleaning.
Applicable scenarios:
suitable for ground environments where garbage is concentrated.
Setting method:
In standby mode, press on the remote control, and the robot enters the Spot
cleaning mode.
c. Edge Cleaning
The Robot Vacuum and the wall shall be cleaned along the wall at a distance
of less than 0.8 inches.
Applicable scenario:
The host cleans the periphery of the indoor fixed objects (such as walls,
table corners, etc.), and returns to the charging dock after working along the
edges.
Setting method:
In standby mode, press on the remote control, and the robot enters the Edge
Cleaning mode.
d.Zig-zag Cleaning
The Robot Vacuum performs bow cleaning mode, and the longest straight line
distance during cleaning is 197 inch.
Setting method:
In standby mode, press on the remote control, the robot enters the Zig-zag
Cleaning
e.Manually control cleaning
Applicable scene:
Uitable for human control cleaning.
Setting method:
In standby mode, press on the remote control, to control the machine moves
forward and turns
Maintenance of Accessories
Dust box and filter
- a. Press the buckle to remove the dust box
- b. Open the dust box lid
- c. Dump out the trash in the dust box
- d. Remove the filter
- e. Wipe the dust box clean
- f. Rinse the filter with clean water
- g. Dry the dust box and filter until completely dry
TIP:
- After the filter is used for 15-30 days, it is recommended to wash it once; the maximum service life of the high-efficiency filter is 3 months.
- Do not put the filter cotton of the dust box in the sun or high-temperature environment to avoid glue failure.
- The dust box and filter must be completely dry before use.
Water tank filter cotton
- a. Pull up to remove the water tank filter cotton by hand
- b. Replace with 2 new filter cottons
Charging pole piece, Anti-drop Sensors, Driving wheel, and Universal
wheel
Note: The charging electrode, Anti-drop Sensors, and bumper contain
sensitive electronic components. Use a dry cloth to clean the parts. Do not
use a wet cloth in case water enters the parts and causes damage
- a. Cleaning the charging electrode
- b. Cleaning the driving wheel and universal wheel
- c. Cnlseoarning the lower visual
TIP:
- If you do not use the product for a long time, fully charge the product and then power off the product before you store the product. Charge the product every three months in case of over-discharge of the battery.
- If the battery is over-discharged or is not used for a long time, the product may not be rechargeable. Contact after-sales service personnel of the company for maintenance. Do not disassemble the product.
Light Indication
The robot has two light indications, the upper is power and the under is recharging. Light has three colors: red, green, and yellow. Light status has lights off, lights always on, quick flash, and slow flash.
Item
|
Contents
| Definition of light
---|---|---
Power| Recharging
Color| Status| Three color| Status
1| Power on| Green| Lights always on| | Lights off
2| Power off| | Lights off| | Lights off
3| Cleaning| Green| Lights always on| | Lights off
4| Recharging| Green| Lights always on| Yellow| Lights always on
5| Low battery recharge| Green| Lights always on| Red| Lights always on
6| During Charging| Green| Lights always on| Green| Slow flash
7| Charging finished| Green| Lights always on| Green| Lights always on
8| Abnormal warning| Red| Quick flash| | Lights off
9| Standby mode| Green| Lights always on| | Lights off
10| Sleeping mode| | Lights off| | Lights off
11| Low battery| Red| Quick flash| | Lights off
12| Not calibrated| Red| Quick flash| Red| Quick flash
13| Calibrated| Green| Lights always on| | Lights off
Troubleshooting
Serial number
| ****
Fault content
| Fault tone| ****
Fault handling method
---|---|---|---
Bass(beep)
| ****
Treble(beep)
1| Bumper abnormal| 0| 1| Please check whether the bumper can rebound
normally?
2| Anti-drop Sensors abnormal| 0| 2| Please clean the anti-drop sensor or
change the location and start again!
3
| Abnormal charging/poor battery life| ****
0
| ****
3
| Please make sure to use the original adapter to charge and try to recharge
the machine for 5 hours!(Keep the charging contact normal)
4| Battery is low| 1| 1| Please put the machine back on the charging pile to
charge!
5| Robot vacuum was stucked| 1| 2| Please use the machine in an open place!
6| Side brush was stucked| 2| 1| Please check whether there is any foreign
matter entangled in the side brush and clean the foreign matter before
starting!
7| The wheels was stucked| 2| 2| Please check whether there is any foreign
matter entangled in the wheel and clean the foreign matter before starting!
8| Fan abnormal| 2| 3| Please check if the fan port is blocked or the dust box
is full!
9| Encoder abnormal| 2| 4| Please try to restart the machine!
Our Robot Vacuum have a one-year warranty. If you have any questions, please contact us.
Product specifications
| Category | Item | Specification |
|---|---|---|
| Diameter | 300 mm | |
| Structure | Height | 74 mm |
| Net weight | 2.5 kg | |
| Battery | Voltage | 14.4 V |
| Battery | 2500 mAh rechargeable lithium battery |
Cleaning parameters
| Dust box capacity| 200 ml
Charging type| Auto charging and manual charging
Cleaning mode| Auto cleaning; Spot cleaning; Edge cleaning
Charging time| About 300 minutes
Cleaning time| About 100 minutes
Main unit| Rated power (W)| 28 W
Operating voltage (V)| 14.4 V
Due to the continuous improvement of the product, the product specifications are subject to the actual product. Our company reserves the right to update the product.
Security information
Component Type
| Hazardous Substance
---|---
Lead (Pb) and its compounds
| Mercury (Hg) and its compounds| Cadmium (Cd) and its compounds| Hexavalent chromium (Cr(VI)) and its compounds| Polybrominated biphenyls (PBB)| ****
Polybrominated diphenyl ether (PBDE)
Plastic parts| 〇| 〇| 〇| 〇| 〇| 〇
Metal parts| X| 〇| 〇| 〇| 〇| 〇
The circuit module of the main unit| ****
X
| ****
〇
| ****
〇
| ****
〇
| ****
〇
| ****
〇
Electronic component| 〇| 〇| X| 〇| 〇| 〇
Battery| 〇| 〇| 〇| 〇| 〇| 〇
Power cord (Metal part)| X| ****
〇
| ****
〇
| ****
〇
| ****
〇
| ****
〇
- O: It means that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in the currently valid edition of the EU RoHS Directive.
- X: It means that the content of the hazardous substance in at least one of the homogeneous materials of the component exceeds the limit requirement specified in the currently valid edition of the EU RoHS Directive. The content of the hazardous substance in the component is in the RoHS exemption list, and meets the environmental protection requirements of the EU RoHS Directive.
Standard compliance:
Directive 2011/65/EU and (EU) 2015/863
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>