MBN LED L50002A1 Mini PWM Dimmer Instruction Manual
- July 20, 2024
- MBN LED
Table of Contents
MBN LED L50002A1 Mini PWM Dimmer
Product Information
Specifications
- Signal Type: Analog 0/1-10V
- Power Mode: Standby
Product Usage Instructions
Analog Signal Type
The product operates using an analog signal type ranging from 0 to 10 volts. Ensure that the input signal matches this range for optimal performance.
Power Mode – Standby
When in standby mode, the product is powered but not actively processing or transmitting data. To activate the product, switch it from standby mode to operational mode following the specific instructions provided in the manual.
Characteristics
- Analog 0/1-10V.
- Standby <0,3 Watt.
- Max. 6A output current.
- Usage temperature -10° C till +40° C.
- CE conformity with the related directive.
Warnings
- For indoor use only.
- Please ensure that the packaging is disposed of in a safe environment.
- We do recommend that a qualified electrician should be used to install the products.
- Never connect any of the connectors to the 230V mains supply directly or indirectly.
- At 0/1-10 V installation the wirings shall do not exceed 10m in length.
Safety Indices
Be sure to have a qualified electrician complete the installation. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any controller is subsequently modified, the person responsible for the modification shall be considered as manufacturer. For indoor use only. Protection class IP20.
Installation
Please follow the sequence of installation step by step. Non-observance can lead to damage.
- Switch off the electricity at the mains before commencing and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect the luminaire to the OUT-connector.
- Connect the signal input (potentiometer, 0/1-10V signal) according to the desired schematic.
- Connect 12 – 48 VDC power supply.
- Ensure fire regulations are not breached when fitting your 0/1-10V-controller.
- If you are in any doubt regarding these instructions, consult a qualified electrician.
Function
DIMMING
- 0-1 V = 0%
- 10 V = 100%
Remarks
The device allows you to vary the luminous intensity from 0 – 100%.
For brightness levels <10%ignition of luminaires driven can not be visible.
This depends on the ambient light and the luminaire features.
Connection diagram
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
Frequently Asked Questions
Q: How do I switch the product from standby to operational mode?
A: To switch the product from standby to operational mode, locate the power button or switch on the device and press or toggle it accordingly. Refer to the installation manual for detailed instructions specific to your product model.