SM Tek Group TWS9 AQUAS True Wireless Earbuds User Manual
- June 5, 2024
- SM Tek Group
Table of Contents
Tek Group TWS9 AQUAS True Wireless Earbuds
**User Manual
**
**INTRODUCTION
**
Headphones that are water resistant? Say no more! Aquas will have you covered
when it comes to a little water. These
headphones are water resistant not waterproof which means that if some water
were to get on them it would be no problem at all. But in no way shape or form
are these designed for swimming or showering. That much water will waterlog
them and become unusable. Perfect for any type of activity in any type of
weather. Never worry about the rain again!
**PACKAGE CONTENTS
**
- 2x Individual Earbuds
- 1 x Charging Case
- 1 x Charging Cable
- 4x Silicone Earbud tips
**PRODUCT OVERVIEW
** SPECIFICATIONS & FEATURES
- IPXS Water Resistant
- Bluetooth v5.0
- Noise Isolating
- Up to 60-Foot Range
- Up to 3 Hours of Continuous Play
- Pre-Paired Technology
- Anti-Interference Transmitter
- Ergonomic Fit
- Smart Display with Accurate Battery Display
HOW TO USE
Charging Case:
-
Connect the Micro USB end of the provided Charging Cable into
the Micro USB Port of the Charging Case. -
Connect the USB end of the USB Cable into any USB Charging Port
-
While charging the Charging Case Indicator Lights will blink.
Charging Earbuds:
- Charge the Earbuds by placing them into the already charged case.
- The Ear Bud Indicator Lights will glow red while being charged.
- All Indicator Lights will turn off once the earbuds are fully charged.
Pair Both Earbuds (TWS):
- Simultaneously hold down the Multi-Function Button on Both earbuds for 3 Seconds.
- The Pairing Indicator Light will blink red and blue and a sound will prompt that they are being paired.
- The blue light will blink slowly to indicate that they have been paired.
- Select “Aquas” from your device’s Bluetooth Interface
Make a Call:
- Connect the earbuds to your Phone’s Bluetooth.
- To receive an incoming call press the Multi-Function Button once.
- To deny an incoming cal I quickly press the Multi-Function Button twice.
Listen to Music:
- Connect the earbuds to your Phone’s Bluetooth.
- Use your Phone’s interface to select your music
- Press the Multi-Function Button to Pause/Play Music
Turn Off the Earbuds:
- Press the Multi-function Button for 5 Seconds or until the red light blinks
- The earbuds will automatically turn off if they are out of reach of the Bluetooth Device or if the Bluetooth Device shuts down.
CARE AND SAFETY
- Do not use this unit for anything other than its intended use.
- Keep the unit away from the heat source, direct sunlight, humidity, water or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children.
- • This unit is not a toy
BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.
©SM TEK GROUP INC, All rights reserved.
Bluestone is o trademark of SM TEK GROUP INC.
New York, NY 10001
www.smtekgroup.com
Made in China