Schneider Electric Resi9 Residual Current Circuit Breaker Instruction Manual

Resi9 R9H1342p – R9H1842p

Resi9 Residual Current Circuit Breaker

PLEASE NOTE

• The installation, maintenance and eventual replacement of this device must only be carried out by a qualified electrician.
• All applicable local, regional and national regulations must be complied with during the installation, use, maintenance and replacement of this device.
• This device should not be installed if, when unpacking it, you observe that it is damaged.
• Schneider Electric cannot be held responsible in the event of noncompliance with the instructions in this document and in the documents to which it refers.
• The service instruction must be observed throughout the life time of this device.

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

• Turn off all power supplying this device before working on it.
• Use a voltage tester with a suitable rated voltage in order to check that all active conductors aren’t energized.
• Carefully inspect the work area to check that no tools or objects could have been left inside the equipment.
  Failure to follow these instructions will result in death or serious injury.

| A (mm)| B (mm)| C (mm)
---|---|---|---
13M 1R| 250| 252| 27
13M 2R| 375| 252| 27
13M 3R| 500| 252| 27
13M 4R| 625| 252| 27
18M 1R| 250| 357| 27
18M 2R| 375| 357| 27
18M 3R| 500| 357| 27
18M 4R| 625| 357| 27

Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F – 92506 Rueil Malmaison Cedex
www.se.com
NHA7467301-05
© 2022 Schneider Electric – All rights reserved. NHA7467301-05

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>