Zeny TC 100 Professional Airbrush Kit with Mini Airbrush Compressor Set User Guide
- June 14, 2024
- ZENY
Table of Contents
TC 100 Professional Airbrush Kit with Mini Airbrush Compressor Set
User Guide
TC 100 Professional Airbrush Kit with Mini Airbrush Compressor Set
MINI AIR COMPRESSOR TC1OO/TC100A
Thanks for purchasing our air compressor and please read
this
Instruction Manual carefully and thoroughly before
operating the air compressor to receive optimum results.
Spare part list
Index No.| DESCRIPTION| PARTS NO.| Q”TY| INDEX NO.|
DESCRIPTION| PARTS NO.| Q”TY
---|---|---|---|---|---|---|---
1| MOTOR HOUSING| TC-100-01| 1| 20| ADJUST VALVE| TC-60-05-02| 1
2| MOTOR COVER| TC-100-02| 1| 20| ADJUST VALVE| TC-60-05-03| 1
3| CYLINDER HEAD| TC-100-03| 1| 20| SCREW| TC-100-20-04| 1
4| 0-RING| TC-16-06| 1| 20| ADJUST VALVE| TC-60-05-5| 1
5| VALVE PLATE| TC-16-07| 2| 21| MANIFOLD| TC-100-21| 1
6| CYLINDER| TC-100-06| 1| 22| UNDER COVER| TC-100-22| 1
7| SCREW| TC-100-07| 1| 23| THERMALLY PROTECTED| TC-100-23| 1
8| PISTON PLATE| TC-100-08| 1| 24| POWER SWITCH| TC-100-24| 1
9| PISTON RING| TC-100-09| 1| 25| TOP COVER| TC-100-25|
10| PISTON ROD| TC-100-10| 1| 26| DC PLUG| TC-100-26| 1
11| BEARING| TC-100-11| 1| 27| RUBBER STAND| TC-100-27| 4
12| CRANKSHAFT| TC-100-12| 1| 28| WASHER| TC-100-28| 4
13| SCREW| TC-100-13| 1| 29| HOLDER| TC-100-29|
14| MOTOR| TC-100-14| 1| 30| WASHER| TC-100-30| 2
15| INPUT AIR HOSE| TC-100-15| 1| 31| SCREW| TC-100-31| 5
16| OUTLET AIR HOSE| TC-100-16| 1| 32| ADAPTER| TC-100-32| 1
17| NIPPLE| TC-100-17| 1| 33| SCREW| TC-100-33| 4
18| NIPPLE| TC-100-18| 1| 34| LED| TC-100-34| 1
19| SCREW| TC-60-05-6| 1| 35| RESISTANC| TC-100-35| 1
20| VALVE CAP| TC-100-20-1| 1| | | |
Introduction
This mini compressor uses the special non-oil type design. Its non-oil promises the transmission medium not to be polluted. Its output fluid is steady and the range of pressure is from 0 to 25 PSI. It is very suitable to be used for airbrush makeup, airbrush nail, spray flowers. Cake decorating and etc because of its non-oil design and continuously work.
Specifications
MODEL| VOLTAGE| ZERO-LOAD CURRENT| AIR OUTPUT PER MIN|
AUTO STOP| AUTO START| MAX| PRESSURE
SIZE| WEIGHT
---|---|---|---|---|---|---|---|---
TC-100| 12V| <1 .0A| 10Lpm| –| –| 25PSI| 11010060mm| 0.5KG
TC-100A| 12V| <1.0A| 10Lpm| 14PSI| 20PSI| –| 11010060mm| 0.5KG
How to use
- Assemble the airbrush, hose and compressor together and make sure compressor be put to the steady position. The airbrush should be single action type.
- Plug AC cord to the compressor the connect the AC adapter to the electrical source. The adapter’s output voltage is 12V and current is 2A.
- Press ON/OFF to OPEN/CLOSE the compressor.
- If the working-pressure is too large, please rotate the ADJUSTER-VALVE to get proper Working-pressure, the range is from 0 to 25 psi.
Warning
- The compressor should be put in dry, clean and ventilates place.
- Don’t let children contact and play.
- The compressor’s ambient temperature should be in 0-40 and don’t put in polarization.
- Don’t let the compressor work over 30 minutes if don’t assemble the hose and the airbrush.
- Please put the airbrush onto the holder when you don’t use it so that not broken.
Email: ausuc.service@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>