Swiss Madison SM-BV665 Freestanding Class 48 Bathroom Vanity Instruction Manual
- June 14, 2024
- Swiss Madison
Table of Contents
- Swiss Madison SM-BV665 Freestanding Class 48 Bathroom Vanity
- Specifications
- BEFORE INSTALLATION
- SUGGESTED TOOLS & MATERIALS
- INCLUDED PARTS
- FREESTANDING VANITY
- INSTALLATION INSTRUCTIONS
- ONE YEAR LIMITED WARRANTY
- WellMadeForever
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Swiss Madison SM-BV665 Freestanding Class 48 Bathroom Vanity
Specifications
- Model: Freestanding Vanity
- Manufacturer: SwissMadison
- Contact Information : 1-434-623-4766 | info@swissmadison.com
- Website: www.swissmadison.com
BEFORE INSTALLATION
- Inspect the product to ensure no damages have occurred while in shipping.
- Observe all plumbing and building codes under your state and local requirements.
- Floor must be level before installation of vanity.
- All dimensions are nominal! Be sure to measure your vanity before installation.
- The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss Madison products by hiring a licensed professional.
- Read installation instructions thoroughly before installing. Be sure to use proper tools and always wear proper personal safety accessories for your protection.
SUGGESTED TOOLS & MATERIALS
INCLUDED PARTS
FREESTANDING VANITY
Parts for Reference
- Base panel
- Front cross bar
- Left side panel
- Right side panel
- Side leg connecting boards (2)
- Front leg connecting boards (2
- Center panel
- Adjustable panel
- Rear top bar
- Rear bottom bar
- Cross beam (2)
- Left door
- Right door & Center door
- A. Cam bolt
- 8. Cam lock
- C. Wooden dowel
- D. Allen key (2)|
- E. Screws M 7 x 50 mm
- F. Locking nuts
- G. Screws M 4.5 x 12.5 mm
- H. Wrench
- I. Screws M 6.4 x 53 mm
- J. Screws M 4 x 22 mm for handle
- K. Handles (3) |
- L. Foam pad
- M. Shelf support
- N: Screw M 6 x 12.5 mm for
- Anti-deflection bar
- O: Screw M 6 x 15 mm for JCN nut
- P: JCN nut
- US90: Anti-deflection bar
- HS26A : Hinge (6)
- BC67: Corner brace
- BC410: Leg frame bracket (4)
- BO45: Bracket
- LC22B2: Leg (4)
INSTALLATION INSTRUCTIONS
Note: Hammer,sher and screw not included
ATTACHMENT OF FURNITURE
This furniture may represent a danger to your security if it’s attachment to
the wall has been done incorrectly.
This attachment must be done by a person with great expertise who will ensure
adequacy between the device of xing and the wall. Please source the right
ftting according to the wall type. For your safety, it is imperative to fx
your furniture to the wall
Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove any excess silicone compound with a wet rag
ONE YEAR LIMITED WARRANTY
Swiss Madison products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products. Should there be any defects in materials or craftsmanship under regular use that are discovered within the first year of installation, Swiss Madison will provide replacement parts at no charge, or at its discretion, replace any product or part of the product that is deemed defective, under normal installation, use, service or maintenance. This warranty applies only to the original purchaser. Proof of purchase will be required in the instance of a claim. Swiss Madison recommends all installations of Swiss Madison products to be conducted by a licensed, professional plumber or contractor. Swiss Madison will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional for installation. Swiss Madison is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
- The installation recommendations were not followed by the installer
- The product has been moved from its initial place of installation
- The product has in any way been modified from its packaged state
- The product has been subjected to improper maintenance, abuse, misuse, excessive use of chemicals, accidents, or other damages, etc.
Swiss Madison makes no implication that its products comply with any local
building or plumbing codes.
It is the consumer’s responsibility and obligation to determine local code
compliance before and during installation. This warranty extends only to the
original purchaser and first consumer.
Swiss Madison is not responsible for any special, incidental or consequential
damages associated with the installation, replacement, return or use of the
original purchaser’s product. This includes but is not limited to freight
costs, labor, travel time, lost profit, home damages and other contingent
liabilities and costs (including, without limitation, costs associated with
‘professionals’ or ‘experts’, investigations, audits, analyses, attorneys and
any other professional/hired services).
The Swiss Madison warranty is a comprehensive and explicit limit of liability. All items not disclosed within the warranty are not addressable within the responsibility of Swiss Madison. Certain states have variances regarding implied warranties; in those situations, we remain fully compliant.
If you have any questions or concerns, please contact us directly at 1-434-MADISON (623-4766)
WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may cause hazard to children and adults. Swiss Madison is not responsible in any way for personal damages.
If you have any questions or concerns please contact us:
1-434-623-4766
info@swissmadison.com
@SwissMadison
WellMadeForever
www.swissmadison.com
1-434-623-4766 |
info@swissmadison.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>