Zomnua 4235 Keyless Entry Door Lock User Manual

June 14, 2024
Zomnua

Zomnua 4235 Keyless Entry Door Lock

Zomnua-4235-Keyless-Entry-Door-Lock-PRO

INTRODUCTION

ParameterZomnua-4235-Keyless-Entry-Door-Lock- \(1\)

Keypad DescriptionZomnua-4235-Keyless-Entry-Door-Lock-
\(2\)

PACKAGE INCLUDED

Zomnua-4235-Keyless-Entry-Door-Lock- \(3\)

PRODUCT DETAILS

Product Overview

Zomnua-4235-Keyless-Entry-Door-Lock- \(4\)

Rear View

Zomnua-4235-Keyless-Entry-Door-Lock- \(5\)

GETTING STARTED

Identify Left/Right Hand Door
Stand by OUTSIDE facing the keypad.Zomnua-4235-Keyless-Entry-Door-Lock-
\(6\)

Check Door MeasurementsZomnua-4235-Keyless-Entry-Door-Lock-
\(7\)

KEYPAD DOOR LOCK INSTALLATION

Adjust the Latch

  • A. Measuring if the latch is long enough, pull it to adjust from 60mm to 70mm.
  • B. Please make sure the hole in the middle is square instead of rhomb like picture on the top.
    Please keep the “square” in the left or right of latch ,not in the middle of the latch.

Install the Latch and Strike Plate

  • A. Insert the latch and keep the latch quare hole horizontal. Zomnua-4235-Keyless-Entry-Door-Lock- \(10\)
  • B. Use Strike & Latch Screws to tight up.

Adjust the Handle Direction

  • A. Loosen the screws on the front and back panel to adjust the handle direction.
  • B. Left Hand Door:
    • Turn the front handle to Left.
    • Turn the back handle to Right.
  • C. Right Hand Door:
    • Turn the front handle to Right.
    • Turn the back handle to Left.

Install the Front Panel

  • A. Adjust the flat ruler direction and Handle Direction Adjustment Screws to fix the handle direction.
  • B. Determine the Handle Direction Adjustment Screws installation position according to the door opening direction.Zomnua-4235-Keyless-Entry-Door-Lock- \(16\)
  • C. Tighten up 3pcs female screw bolt.

Route the IC Wire & Install the Mounting Plate

  • A. Route the IC wire under the latch and cross it over the plate hole.Zomnua-4235-Keyless-Entry-Door-Lock- \(17\)
  • B. Tighten up 4pcs mounting plate screws to fix the mounting plate.Zomnua-4235-Keyless-Entry-Door-Lock- \(18\)

Install the Back PanelZomnua-4235-Keyless-Entry-Door-Lock-
\(19\)

  • A. Connect the ic wire.
  • B. Tighten the 4*back panel screws.
  • C. Install the batteries and cover.

Test

  • A. Put the batteries in and Test the keypad, enter 123456# to unlock.Zomnua-4235-Keyless-Entry-Door-Lock- \(20\)

How to reset

  • A: Take the back panel apart and press the inside reset button for 3s (Make sure the IC wire and battery is installed properly in the period.) Zomnua-4235-Keyless-Entry-Door-Lock- \(21\)

HOW TO SET THE LOCK

Detailed operation steps

Zomnua-4235-Keyless-Entry-Door-Lock- \(22\) Zomnua-4235-Keyless-Entry-Door-Lock- \(23\) Zomnua-4235-Keyless-Entry-Door-Lock- \(24\) Zomnua-4235-Keyless-Entry-Door-Lock- \(25\) Zomnua-4235-Keyless-Entry-Door-Lock- \(26\)

Please feel free to contact us if you have any questions or concern
Customer Support
Email: zomnuaservices@hotmail.com
Toll Free(USA: 1-888-666-0779
Toll Free(CAN): 1-855-538-2656

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals