Satel OPU-3P Alarm Control Panel Enclosure Owner’s Manual

: June 12, 2024
: Satel

Table of Contents

Satel OPU-3P Alarm Control Panel Enclosure
Product Information
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Satel OPU-3P Alarm Control Panel Enclosure

Satel OPU-3P Alarm Control Panel Enclosure product

Product Information

The OPU-3 P Enclosure is designed to provide sufficient space for the installation of 40VA or 60VA network transformers. It can also accommodate a 7 Ah or 17 Ah, 12 V backup battery. The enclosure is specifically designed to not block or weaken radio signals, allowing for the installation of wireless devices and their antennas inside.

Tamper Protection
The enclosure is equipped with tamper protection features to prevent unauthorized access. It provides protection against opening and removing from the mounting surface, ensuring the security of the installed components.

Intruder Alarms
The OPU-3 P Enclosure is suitable for use in intruder alarm systems. It is designed to house and protect electronic components and devices used in such systems. The enclosure is made of plastic, which ensures durability and resistance to environmental factors.

Technical Data

Enclosure dimensions: 324 x 382 x 108 mm
Weight: 1850 g

Please note that the actual appearance of the product may differ from the images provided. The product descriptions on the web service are for informational purposes only.
Visit www.satel.eu for more information.

Product Usage Instructions

To use the OPU-3 P Enclosure:

Ensure that you have all the necessary components, including the network transformers and backup battery, as per your system requirements.
Select a suitable mounting surface for the enclosure, ensuring it is secure and easily accessible.
Carefully open the enclosure by following the provided instructions or referring to the user manual.
Install the network transformers inside the enclosure, ensuring they are securely positioned.
If using a backup battery, place it inside the enclosure, ensuring proper connection and positioning.
Install any wireless devices and their antennas inside the enclosure, making sure they do not block or weaken the radio signal.
Close the enclosure, ensuring it is properly sealed and secured.
If required, activate the tamper protection features to prevent unauthorized access.
Mount the enclosure on the selected surface, following the provided instructions or referring to the user manual.
Connect the necessary cables and wires according to your system requirements.
Test the functionality of the installed components and ensure proper operation.

For more detailed instructions, please refer to the user manual provided with the product or visit the official website at www.satel.eu.
OPU–3 P is a robust, surface–mounted enclosure, made of white ABS plastic. Owing to its aesthetic appearance, the enclosure can be installed in conspicuous locations in usable space interiors. The enclosure base can be recessed into the wall so that the enclosure proper can occupy less space. Its neutral design and ample size make it possible to install inside the enclosure many types of SATEL control panels, their extension modules, communication modules, controllers and a large number of other devices. Installation and maintenance of the system components is further facilitated by using special mounting panels. OPU–3 P is provided with double tamper protection against opening the enclosure and tearing it off the wall. The enclosure has sufficient space for installation of 40VA or 60VA network transformers, and can also accommodate a 7 Ah or 17 Ah, 12 V backup battery. As it neither blocks nor weakens the radio signal, wireless devices including their antennas can be installed inside the enclosure.