TRISTAR BQ-2870 Electric BBQ Instruction Manual
- June 4, 2024
- Tristar
Table of Contents
TRISTAR BQ-2870 Electric BBQ
SAFETY
- By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
- The appliance must be placed on a stable, level surface.
- The user must not leave the device unattended while it is connected to the supply.
- This appliance is only to be used for household purposes and only for the purpose, it is made for.
- This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
- To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
- Keep the appliance and its cord out of reach of children less than 8 years.
- The temperature of accessible surfaces may be high when the appliance is operating.
- The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
- WARNING: Charcoal or similar combustible fuels must not be used with this appliance.
- To prevent fire or shock hazards do not expose this appliance to rain or moisture.
- The surface is liable to get hot during use.
Cleaning and maintenance
- Always unplug the device and let it cool down completely before cleaning
- Remove and empty the fat collecting tray after each use and wash the tray in warm, soapy water.
- Wipe the outside with only a slightly moistened cloth ensuring that no moisture, oil or grease enters the cooling slots.
- Never use abrasive cleaners, metal brushes or paint thinner to clean the base, otherwise, the barbecue will be damaged.
- Never immerse the device underwater, the device and the various parts are not dishwasher-proof.
- The grill rack can be cleaned with a metal brush and abrasive cleaners, please make sure the rack will be rinsed and dried after cleaning. After cleaning apply a thin layer of cooking oil to the rack.
PARTS DESCRIPTION
- Main body
- Thermostat knob
- Indicator light
- Plastic feet (for table model)
- Stand
- Storage rack
- Water/grease tray
- Grill rack
- Heating element
BEFORE THE FIRST USE
- Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
- Clean before use the appliance with a damp cloth.
- By using the appliance for the first time, the appliance may smell and emit some smoke. This is normal, the grease that may have adhered to the element during manufacture is burning off.
Assembly of the stand
- The stand must be assembled before using the barbecue grill.
- Take the metal poles and insert the long pole into the short pole. Make sure that the holes of both poles are aligned. The shorter metal pole should be facing upwards towards the grill unit.
- Attach the legs (metal poles) of the stand to the metal plates. Place the holes of the short as well as the long metal plates over the holes of the metal poles and insert the screw. Attach the nut onto the screw and slightly fasten it. The long metal plates should be attached to the front and the short metal plates should be attached to the sides of the stand. Attach the remaining 3 legs to the stand accordingly.
- Fasten the nut.
- The mounted stand has a trapezoidal shape. The narrow side is facing upward.
- Insert the rubber caps into each opening of the assembled leg.
- Insert the storage rack.
- The stand is now fully assembled.
Assembly of the grill
- Fold out the main body (1) as a table and lock it firmly by the metal lock (2).
- Use the (ST2.9X12) screws (3) to fix the 2 pieces of plastic plates (4).
- Place the plastic plates on the bottom of the main body (1) by 4 (ST2.9X10) screws (5).
- Use one (ST2.9X10) screw (6) to lock the water/grease tray (7) to the main body.
- Slide the heating element into its position (9). Note: the heating element is equipped with a safety switch, if the element is not placed in the correct position the element will not function. Place the grill rack (8) into the main unit.
- Use the 4 supplied plastic feet for table version or place the grill on the stand.
USE
- Make sure you place a heat resistance coating under the appliance in order to prevent traces due to heat and grease stains on your table.
- Fill the grease tray with water, and make sure the water level remains below the element.
- During the use the water will evaporate and should be refilled. Note: make sure you do not drip water onto the element.
- Insert the mains plug into the wall socket.
- Set the thermostat control knob to the ‘Max.’ position. The indicator light turns on and the heating element is permanently switched on.
- After approximately 5-10 minutes, the heating element reaches the right temperature. Turn the thermostat control knob back to a lower position and/or adjust the grill rack to the middle or upper position.
- The appliance can also be used to keep food warm; turn the thermostat control knob to a low position, and the heating element will be switched on and off alternatively to keep the food warm.
- After using the appliance, turn the thermostat to “MIN” and disconnect from the mains supply socket.
- Covering the BBQ with aluminum foil or other material is dangerous! The heat cannot get away and will cause the BBQ to melt and malfunction.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual, and packaging put your attention to this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances, you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
Tristar Europe B.V. | Jules Verneweg 87 5015 BH Tilburg | The Netherlands | www.tristar.eu.
References
- Tristar | Household appliances - Unbeatable basics for your home
- Tristar | Accessories & spare parts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>