ABLEWARE 764271000 In Bed™ Head Wash System Instructions
- June 4, 2024
- ABLEWARE
Table of Contents
ABLEWARE 764271000 In Bed™ Head Wash System
Note:
The Basin drain is located inside the basin of the InBed™ Head Wash System.
The drain spout is located on one of the side walls.
Instruction For Use
- Before use, open the basin drain and loosen the drain spout for ventilation.
- Position the person’s head, neck, and shoulders on the neck support.
- Moisten hair and shampoo.
- Rinse and towel dry hair thoroughly.
- Before closing the basin drain make sure all the water has drained into the unit.
- Close basin drain and drain spout for transport.
- To empty, stand the unit upright, loosen the basin drain, and open the drain spout.
- Empty water out of the drain spout into a sink.
Note:
- In order to prevent leakage make sure the two neoprene gaskets are always in place when closing the basin drain.
- The unit should be cleaned using a mild soap or detergent if desired. A spray disinfectant can be used to clean the device and prevent mildew. Make sure to thoroughly rinse after using any disinfectants or detergents.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>