OLIGHT Oclip Rechargeable EDC Flashlight User Manual

OLIGHT Oclip Rechargeable EDC Flashlight

Product Information

Specifications

(MOONLIGHT), 5h
(REDLIGHT)
Charge Type| USB-C
Cable Length| 0.25m
Input| 5V/1A
Charging Time| About 1.5 hours
Dimensions| (L)48.5(W)21(H)23mm
Weight| 30g/1.06oz

Product Overview

• A clip-on light with dual light sources. The product features a high-performance LED, an on/off battery level indicator, a magnetic base, and a clip for easy attachment.
• The product also includes a rechargeable Li-ion battery with a capacity of 280mAh and a Type-C charging port for convenient charging.

Product Usage Instructions

Charging

• To charge the product, connect the USB-C charging cable to the Type-C charging port on the product and connect the other end to a power source.
• A red light will indicate that the product is charging, and a green light will indicate that the charging is completed.

On/Off

To turn on the product, press and hold the button for more than 1 second. To turn it off, press and hold the button again for more than 1 second.

Lockout / Unlock

• To activate the lockout mode, when the product is off, press and hold the side switch for about 2 seconds. The product will enter the moonlight mode briefly and then switch off to indicate the lockout mode. The red indicator at the center of the switch will be on for a short time to indicate that the product is in lockout mode.
• To unlock the product, continue holding the side switch for over one second until the moonlight mode is on again.

Moonlight Mode

To activate the moonlight mode, press and hold the button for 1 second or more when the product is off. If the last used mode was moonlight mode, simply press the button to turn on the product in moonlight mode.

Change Brightness Level (White light mode only)

In white light mode, long press the button to change the brightness level. The output starts from the current brightness level and changes in the order of Low -> Medium -> High -> Low. Release the button to set the desired brightness level.

Strobe Mode

To activate strobe mode, press and hold the button for more than 2 seconds.

Red Light Mode

To switch between red and white light mode, press and hold the button for more than 0.5 seconds.

Change Red Light Mode

In red light mode, press and hold the button for more than 0.5 seconds to change the red light mode. The modes include red light and red light blink.

Beacon Mode

To activate beacon mode, double press the button. The modes include white light beacon and red light beacon.

Battery Indicator

The product has a battery indicator that shows the battery level. Double press the button to check the battery level. The indicator will show green for 60-100% battery, orange for 30-60% battery, and red for 0-30% battery.

Frequently Asked Questions (FAQ)

• How long does the product’s runtime last?
  The runtime of the product varies depending on the brightness level and mode. At 100% brightness, the runtime is 1 minute (HIGH), 60 minutes (MEDIUM), 90 minutes (LOW), 12 hours (MOONLIGHT), and 5 hours (REDLIGHT).

• How long does it take to charge the product?
  The product takes about 1.5 hours to fully charge using the included USB-C charging cable.

• Can the product be locked to prevent accidental activation?
  Yes, the product has a lockout mode that can be activated by pressing and holding the side switch for about 2 seconds when the product is off.

• How do I switch between red and white light mode?
  To switch between red and white light mode, press and hold the button for more than 0.5 seconds.

• Can I check the battery level of the product?
  Yes, you can check the battery level by double pressing the button. The battery indicator will show green for 60-100% battery, orange for 30-60% battery, and red for 0-30% battery.

BOX CONTENT

Product specification

see Table 1 and Table 2.

Product overview

see Figure 1.

Operating instructions below:

1. Charge
   see Figure 2.

2. On/Off
   see Figure 3.
   Single press the button to turn on and off. When turned off, the current mode will be memorized. (Strobe and White Light Beacon can’t be memorized)

3. Lockout / Unlock
   see Figure 4.
   When the light is off, press and hold the side switch for about 2 seconds to access the lockout mode. The light will enter the moonlight mode first and then switch off to signal the lockout mode. The red indicator at the center of the switch will be on for a short time to indicate that the light is still in lockout mode. To unlock it, continue holding the side switch for over one second until the moonlight mode is on again.

4. Moonlight mode
   see Figure 5.
   To activate Moonlight mode, press and hold the button for 1 second or more when the flashlight is off. If the last used mode was Moonlight mode, simply press the button.

5. Change brightness level (White light mode only)
   see Figure 6.
   In the white light mode, long press the button to change the brightness. The output starts from the current brightness, and changes in the order of Low->Medium->High->Low. Release the button to select the brightness.(Note: Moonlight mode are not included in this cycle).

6. Strobe mode
   see Figure 7.
   To turn Strobe on, quickly press the button three times or more when the light is off. Press or press and hold to turn off Strobe.

7. Red light mode
   see Figure 8.
   While the light is on or off, double-press to enter red light mode. Single- press to turn off, and the current mode will be memorized when the light is turned on again.

8. Switch between red and white light mode
   see Figure 9.
   When the light is on, double press the button to switch between red light mode and white light mode.

9. Change red light mode
   see Figure 10.
   In the red light mode, press and hold for more than 0.5 seconds to switch to red light blink, release the button, and press and hold for more than 0.5 seconds to go back to constant red light.

10. Beacon mode
    see Figure 11.
    To turn Beacon on, quickly press the button three times or more when the light is on. Press or press and hold to turn off Beacon.

Battery Indicator

see Figure 12.

DANGER

• Do not disassemble the product.
• Do not throw the product into the fire, it may cause the battery to burn or even explode, causing unpredictable disasters.

CAUTION

• Do not look directly at the light source or shine it into your eyes, as this may cause temporary blindness or permanent damage to your eyes.
• Do not obstruct the lens, or else the energy emitted from the light may cause the object to burn.
• Don’t place, charge or use this light in a car where the temperature inside may exceed 60°C or in similar environments.
• Do not immerse the product in water or other liquid as it will damage the product.
• Do not place the light in a dusty environment as dust may enter the switch and cause functional failure.
• The clip is magnetic, and the metal powder adsorbed on the surface will affect the function, please clean it immediately.

NOTICE

• Please only use the TYPE-C charging cable to charge the product to avoid damage.
• Charge the product completely before storing it for a long period.
• If the product is carried, transported, please lock the product.
• When the charging port is not in use, keep the dust cover closed to prevent dust or foreign objects from entering.

REMARK

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Non-pet toys.
• When the ambient temperature is below 0°C/32.0 °F, the light can only output at the low and medium brightness mode.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement. Within 2 years of purchase: Contact Olight for repair or replacement. If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal use conditions, we provide a conditional quality assurance as appropriate.

ABOUT COMPANY

• USA Customer Support
  cs@olightstore.com

• Global Customer Support
  contact@olightworld.com Visit www.olightworld.com to see our complete product line of portable illumination tools.

• Dongguan Olight E-Commerce Technology Co., Ltd

• 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>