Swan ST14610GRYN Nordic 2 Slice Toaster User Guide
- June 14, 2024
- Swan
Table of Contents
wan ST14610GRYN Nordic 2 Slice Toaster
Product Information
Specifications
- Product Name : Toastmaster 2000
- Model Number : TM2000
- Power : 1200W
- Voltage : 110V
- Dimensions : 12.5″ x 8″ x 7″
- Weight : 4.5 lbs
Product Usage Instructions
1. Crumb Tray
The crumb tray should be emptied after each use to prevent a build-up of crumbs, which may affect the performance of the device. Follow these steps to empty the crumb tray
- Locate the crumb tray at the bottom of the toaster.
- Slide the crumb tray out from its slot.
- Dispose of the crumbs in an appropriate manner.
- Wipe the crumb tray clean with a damp cloth.
- Slide the crumb tray back into its slot.
2. Lever
The lever is responsible for holding the bread in place during toasting. It is important to ensure that the lever is held down for a period of 5 to 10 seconds to allow it to stay in place and connect properly. This will provide a balanced toasting of the bread. Avoid heavy handling of the device as it may cause damage to the internal heating element and lever. Even small damages can gradually worsen over time.
Frequently Asked Questions (FAQ)
-
Q1: How often should I empty the crumb tray?
A1: The crumb tray should be emptied after each use to prevent a build-up of crumbs that may affect the performance of the device. -
Q2: How long should I hold down the lever?
A2: Hold down the lever for a period of 5 to 10 seconds t ensure it stays in place and connects properly for balanced toasting of the bread. -
Q3: Can heavy handling damage the toaster?
A3: Yes, heavy handling of the toaster can cause damage to the internal heating element and lever. Even small damages can gradually worsen over time.
TROUBLESHOOTING GUIDE
-
A troubleshooting solution is to clean and maintain the device which is found on page 6 of the manual. The defect could be due to needing to empty the crumb tray, it is worth emptying after each use to prohibit a build of crumbs which may affect the performance of the device. It is also worth making sure that the customer is holding down the lever for a period of 5 to 10 seconds, which should allow the lever to stay in place and connect properly, this will provide a balance toasting of the bread. Any heavy handling to the device may also cause damage to the internal heating element, even small damages gradually become worse over time.
-
Our customer service team have stated that the placement of the central heating panel will generate higher heat than the outside toasting panels. This is because there is a lot more heat generated from the combined grills resulting in the inner side of the toast being slightly crisper simply because the bread item will be exposed to a more concentrated amount of heat. Therefore, there may be a slight imbalance when toasting.
Crumb tray -
emptying after each use to prohibit a build of crumbs which may affect the performance of the device.
Lever
-
It is also worth making sure that the customer is holding down the lever for a period of 5 to 10 seconds, which should allow the lever to stay in place and connect properly, this will provide a balance toasting of the bread. Any heavy handling to the device may also cause damage to the internal heating element and level, even small damages gradually become worse over time.
Trip -
Please check the power supply, please check to ensure the device is plugged in and that the plug socket is working and can fulfil the power of the device. I have found that with high-powered electric devices it is important to check what other devices are on the same circuit, i.e. any other high-power electric including microwaves, coffee machines, and Kettles, as such devices need a high surge of power for it to properly function, If other devices are on the same circuit then this will limit the power and could consequently blow the fuse, or cause the fuse to trip the electrical network. I would also suggest to the customer check the electrical outlet of the device to see if it is compatible with the device. Always ensure that the voltage on the rating label corresponds to the mains voltage in your home.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>