Huanyang HY Series VFD Variable Frequency Drive User Guide
- June 14, 2024
- Huanyang
Table of Contents
Huanyang HY Series VFD Variable Frequency Drive User Guide
1 Terminal Configuration
1.1 Main Circuit Terminals
1.2 Arrangement of Control Circuit Terminals
1.3 Function Description of Control Circuit Terminals
1.4 Wiring Diagram
2 Keypad description
3 Parameter setting description
Note: The sign ” ” below means cursor flicking
3.1 Parameter setting figure
The operation panel of HY series adopts two-level menu structure for parameter setting and other operations. The following flowchart is an example of how to set function code Pd001 to 1 (change the running function of the keyboard RUN to terminal control).
Remarks: Press the PRGM , STOP or SET can return to the first-level menu from the second-level menu. The difference of the three is: press the SET to save the set parameters into the control panel and then return to the first-level menu with shifting to the next function code automatically; press the PRGM or STOP to directly return to the first-level menu without saving parameters and keep staying at the current function code.
4 Cases about operation
Note: The sign ” ” below means cursor flicking
⚫ Example 1: Restore factory setting, set function code Pd013 from 00 to 08.
Note:
After factory set, panel potentiometer needs to be set to work cPD0.02=1 and
Pd070=1}Suitable for 50hz motor)
⚫ Example2 Set frequency from 50Hz to 400Hz
- Set function code Pd005 to 400
- Set function code Pd004 to 400
- Set function code Pd072 to 400
(Note: The setting sequence cannot be changed)
⚫ Example 2: The potentiometer on keypad is available set function code Pd002
to 1cfor the 50hz motor
5 General functional parameters
Note: The function code parameters can be changed under the status of inverter stopping output.
HUANYANG ELECTRICAL CO.,LTD
Factory Add: Chennan Village, Damaiyu Street ,Yu Huan Town,
Tai zhou City, Zhejiang 317600 China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>