BAOVERI K9419 Electric Toothbrush with 8 Brush Heads Instruction Manual

BAOVERI K9419 Electric Toothbrush with 8 Brush Heads Instruction Manual

Read this user manual carefully before you use the appliance and save it for future reference.

Product specification

Product Model :  D32
Brush Head Vibration Frequency : 42000vibration/min(Unsustainable)
Rated Power : 2W
Nominal Voltage :  3.7 —
Rated input voltag e:  5=
Rated Power Inpu t:  2W
Rated Waterproof :  IPX7
DESINGER:DESIGNED BY BAOVERI IN USA

Package Includes

1xSonic Electric Toothbrush 6x”U”shape Replacement toothbrush heads 2x”W”shape Replacement toothbrush heads 1xCharging base

Support Function

5 brushing modes
3 intensity levels
60-day battery life
2 min smart timer
30 sec quadpacer IPX7 Waterproof Safe and gentle

Danger

Keep the charger away from water. Do not place or store it over or near water in a bathtub, wash basin, sink, etc. Do not immerse the charger in water or any other liquid. After cleaning, make sure the charger is completely dry before you connect it to the mains.

Warning –

• The charging cord cannot be replaced.
• Always have the charging cable replaced with one of the original type to avoid a hazard.
• Do not charge the toothbrush outdoors or near heated surfaces.
• If the appliance is damaged in any way (brush head, toothbrush handle, or charging cable), stop using it. This appliance contains no serviceable parts. If the appliance is damaged, contact the Product support for more information.
• This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervisionor instruction way and if they understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

Caution

• Do not clean the brush head, the handle, or the charging cable in the dishwasher.
• If you have had oral or gum surgery in the previous 2 months, consult your dentist before you use the toothbrush.
• Consult your dentist if excessive bleeding occurs after using this toothbrush or if bleeding continues to occur after 1 week of use. Also, consult your dentist if you experience discomfort or pain when you use the Sonic Electric Toothbrush.
• The BAOVERI Sonic Electric Toothbrush complies with the safety standards for electromagnetic devices. If you have a pacemaker or other implanted device, contact your physician or the device manufacturer of the implanted device prior to use.
• This appliance has only been designed for cleaning teeth and gums. Do not use it for any other purpose. Stop using the appliance and contact your doctor if you experience any discomfort or pain.
• The BAOVERI Sonic Electric Toothbrush is a personal care device and is not intended for use on multiple patients in a dental practice or institution.
• Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of wear appear. Do not use other brush heads than the ones recommended by the manufacturer.
• If your toothpaste contains peroxide, baking soda or bicarbonate (common in whitening toothpastes), thoroughly clean the brush head with soap and water after each use. This prevents possible cracking of the plastic.
• -If the toothbrush is left unused for a long time, the charging Indicator will not display when the toothbrush is charged again. Please wait patiently for 6-10min, the product can be normal to use.

Electromagnetic fields (EMF)

This BAOVERI appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields

Product Charging

The flashing green indicator light at the bottom of the toothbrush means that the toothbrush is on low power, please charge it in time.

The charging method is as follows

1. The charging indicator light flashes green: charging
2. The charging indicator light is steady green: fully charged
3.  When the power is low (the charging indicator flashes green or cannot be turned on), please connect the charging cable and the power supply, and fully charge will take about 4 hours.

Note: The original charging base is the exclusive for sonic electric toothbrush D32, which does not support charging for other devices. 6

Remaining battery reminder

After each turn on the toothbrush, the 5 mode Indicator light will be on for 2s to indicate the remaining power of the toothbrush battery.

Brush heads

Your BAOVERI Sonic Electric Toothbrush comes with a range of brush heads which are designed to deliver superior results for your oral care needs.

The number and type of brush heads might change according to the toothbrush type you purchased

1. “U” shape brush head (6niu)
2. “W” shape brush head (7niu)

The dentist recommends replacing the toothbrush head every 3 months.

Time Reminder

During the brushing process, the toothbrush will pause every 30s to remind you to brush the different sections of your mouth. 2 minutes is the best brushing time recommended by the ADA in the United States. Therefore, the toothbrush will automatically shut off after running for 2 minutes.

Memory function

When the toothbrush runs for 3s and then turns off, the toothbrush’s smart chip will automatically memorize the mode and intensity settings before it is turned off.
When the toothbrush is turned on for the next time, the toothbrush will automatically enter the mode and intensity settings in the memory.

Applicable people for 5 brushing modes

Clean: Most people
White: People with yellow teeth are caused by black-yellow pigments such as coffee stains, tobacco stains, tea stains, etc.
Polish: People with calculus or tartar problem Gum Care: People with bleeding gums problem Sensitive: People with sensitive gums and teeth.

Suggested brushing ways for 5 brushing modes

The power toothbrush equipped with 5 different modes to accommodate all your needs

Clean or Sensitive mode

Clean or sensitive mode is suggested to use 2-minute with intensity level 3. It gives you a thorough and complete clean. To reach optimal results, follow the instructions below:

1. brushing the upper teeth at the right (segment 1) and brush for 20 seconds, on both the outer and inner surfaces before you move to the upper front teeth (segment 2). Continue brushing for segments 3 to 6 to ensure even brushing in all 6 segments of the mouth.

White+Polish mode

White+Polish mode is suggested to use 2-minute 40-seconds with intensity level 3. To reach optimal results, please follow the instructions

below:

1. brushing the upper teeth at the right, (segment 1) brushing it for 20 seconds before moving to the upper front teeth (segment 2). Continue doing this for segments 3 to 6 to ensure even brushing in all 6 sections of the mouth.

2. After completing all 6 of these segments, the toothbrush switches to polishing mode.

3. To polish your teeth, brush the outer surface of your upper teeth for 20 seconds (segment 2) and then brush the outer surface of your lower teeth for 20 seconds (segment 5). The polishing the motion used in this part of the mode will feel different from the first two minutes of the mode.

Gum Care mode

Gum Care mode is suggested to use 3-minute 20-seconds with intensity level 3. In order to reach optimal results, follow the instructions below:

1. Begin brushing the upper right teeth (segment 1) and brush for 20 seconds, on both the outer and inner surfaces before you move to the upper front teeth (segment 2). Continue doing this for sections 3 to 6 to ensure even brushing in all 6 segments of the mouth.

2. Next, to take optimal Care for your gums, brush the outer and inner surfaces of your upper right back teeth for 20 seconds (segment 1), then brush the outer and inner surfaces of your upper left back teeth for 20 seconds (segment 3).

Continue brushing the outer and inner surfaces of your lower right back teeth for 20 seconds (segment 4), followed by another 20 seconds on the outer and inner surfaces of your lower left back teeth (segment 6). The brushing motion used in this part of the mode will feel different from the first two minutes of the mode.

Intensity settings

M 000 Your power toothbrush gives you the option to choose between 3 different intensity levels: low, medium and high. If you wish to change to a different intensity, you can do so by pressing the mode/intensity button for 1.5s while brushing. The intensity cannot be changed as long as the handle is powered off or paused.

Using your BAOVERI Sonic Electric Toothbrush

Brushing instructions

1.  Attach your desired brush head. Align the brush head so the bristles point in the same direction as the front of the handle.
   
   (Notes: The bristles of the toothbrush head should be facing upwards with the power on/off button.)

2.  Wet the bristles.
   

3.  Apply a small amount of toothpaste on the bristles.
   

4. Place the toothbrush bristles against the teeth at a slight angle (45 degrees), pressing firmly to make the bristles reach the gumline or slightly beneath the gumline.

Note : Keep the center of the brush in contact with the teeth at all times

5. First, Press the power on/off button to switch on the BAOVERI Sonic Electric Toothbrush. Second, press the mode/intensity button to choose the mode you need. Third, Long press the mode/intensity button for 1.5s to choose the suitable intensity. From left to right, the intensity indicator means low intensity, medium intensity and high intensity.

For example: If you need to choose the polish mode with high intensity. Follow these steps:

1. Press the power on/off button to switch on the Sonic Electric Toothbrush.

2. Press the mode/intensity button to choose the polish mode.

3. Long press the mode/intensity button for 1.5s, after the low intensity indicator lights up, release the button;

4. Long press the mode/intensity button for 1.5s again, after the medium intensity indicator lights up, release the button.

5. Long press the mode/intensity button for 1.5s once more, after the high intensity indicator lights up, release the button. That is all.
   

6. Apply light pressure to maximize BAOVERI Sonic Electric Toothbrush’s effectiveness. Brush your teeth with a small back and forth motion so the bristles reach between the teeth. Continue this motion throughout the brushing cycle.

Note: The bristles should flare slightly. Do not scrub.

7. To clean the inside surfaces of the front teeth, tilt the brush handle semi-upright and make several vertical overlapping brushing strokes on each tooth.

8. Press the power on/off button to switch off the BAOVERI Sonic Electric Toothbrush

Maintenance and storage

Toothbrush handle

1. Remove the brush head and rinse the metal shaft area with warm water. Make sure you remove any residual toothpaste.
2. Wipe the entire surface of the handle with a damp cloth.
   Note : Do not use isopropyl rubbing alcohol, vinegar or bleach to clean handle as this may cause discoloration.

Brush head

1. Rinse the brush head and bristles after each use.
2. Remove the brush head from the handle and rinse the brush head connection with warm water at least once a week.

Storage

If you are not going to use your BAOVERI Sonic Electric Toothbrush for an extended period of time, unplug the charger from the wall socket, clean it and store it in a cool and dry place away from direct sunlight.

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Troubleshooting

warm water and cotton swabs
There issomething onthe metal shaftarea of thetoothbrushhandle| Rinse the metalshaft area oftooth brushhandle with warm water and paper
Mismatched tooth brush head| Replacement tooth brush head
Power consumption is too fast| Frequent use| Charging in time
Toothbrushvibrationfrequencygetting lower| The toothbrushhead is notinstalledproperly| Remove thetoothbrushhead andreinstall it
Low power| Charge required

Product Support: 18 months Your satisfaction is always our top priority. Please feel free to contact us through the following steps: 1). Log in to your Amazon account. 2). Open your purchased orders 3). Click the store name next to “Sold by:” 4). Click “Ask a question.” The seller support team email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>