HYPERX HX-HSCFX-BK-WW Cloud Flight Headset Keyboard Instruction Manual
- June 14, 2024
- HYPERX
Table of Contents
User Manual
HyperX CloudX Flight™ Headset Keyboard
HyperX CloudX Flight™
Part Numbers
HX-HSCFX-BK/WW
Find the language and latest documentation for your HyperX CloudX Flight
Headset here.
HyperX CloudX Flight Headset Installation Guide
Overview
A. Game balance button
B. Chat balance button
C. Microphone mute button
D. Ear cup LED
E. USB charge port
F. Power button
G. Microphone port
H. Volume wheel
I. Detachable microphone
J. Microphone mute LED
K. Wireless adapter
L. Wireless status light
M. USB charge cable
Specifications
Headphone
Driver: Dynamic, 50mm with neodymium magnets
Type: Circumaural, Closed back
Frequency response: 20Hz–20,000Hz
Impedance: 32 Ω
Sound pressure level: 113dBSPL/mW at 1kHz
T.H.D.: < 2%
Weight: 288g
Weight with mic: 298g
Cable length and type: USB charge cable (1m)
Microphone
Element: Electret condenser microphone
Polar pattern: Bi-directional, Noise-cancelling
Frequency response: 100Hz-10,000 Hz
Sensitivity: -51dBV (0dB=1V/Pa,1kHz)
Battery life*
30 hours – LED off
18 hours – Breathing LED
13 hours – Solid LED
Wireless Range***
2.4 GHz
Up to 20 meters
Tested at 50% headphone volume
Wireless range may vary due to environmental conditions
Usage
- Connect the wireless adapter to a USB port on the Xbox One® system.
- Power on the headset.
- When the wireless adapter status light is solid, the headset is now connected to the adapter.
- If logged in with an account, the Xbox One® will assign the headset to that account and notify the user.
Note: Connecting the headset to the Xbox One® system does not automatically mute or adjust the sound from the TV.
Headset Controls
Power button
Hold the power button for 3 seconds to power on/off the headset.
With the headset powered on, short press the power button to cycle through the
ear cup LED modes.
The supported LED modes are solid (default), breathing, and off.
Volume wheel
Rotate the volume wheel up or down to adjust the volume level. Game/Chat
balance buttons
Press the game/chat balance buttons to adjust mix between game audio and chat
audio. The game/chat balance functionality operates independently from the
overall headset audio volume.
Microphone mute button
Press the microphone mute button to toggle the microphone mute. The microphone
mute LED will indicate the current mute status.
| Microphone Mute LED | Mic Status |
|---|---|
| On | Muted |
| Off | Active |
Hold the microphone mute button for 3 seconds to turn mic monitoring on/off.
Headset Status Beep Tone Indicators
The headset will emit beep tones to indicate status for power, volume, game/chat balance, microphone mute, mic monitoring, and battery charge.
| Power Status | Beep Tone Indicator |
|---|---|
| Power on | One tone (high) |
| Power off | Two tones (high, low) |
| Volume Status | Beep Tone Indicator |
| --- | --- |
| Setting to 100% maximum volume | Three tones (high) |
| Setting to 0% minimum volume | Three tones (low) |
| Game/Chat Balance Status | Beep Tone Indicator |
| --- | --- |
| Setting to 50% Game / 50% Chat | One tone (mid) |
| Setting to 100% Game / 0% Chat | Two tones (low) |
| Setting to 0% Game / 100% Chat | Two tones (low) |
| Microphone Mute Status | Beep Tone Indicator |
| --- | --- |
| Microphone muted | Two tones (high) |
| Microphone active | One tone (high) |
| Mic Monitoring Status | Beep Tone Indicator |
| --- | --- |
| Mic Monitoring enabled | One tone (low) |
| Mic Monitoring disabled | One tone (low) |
| Battery Status | Beep Tone Indicator |
| --- | --- |
| 25% battery remaining | Two tones (low) |
| 10% battery remaining | Three tones (low) |
| 5% battery remaining | Five tones (mid, low, mid, low, mid) |
Headset Charging
When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.
| Ear Cup LEDs | Charging Status |
|---|---|
| Breathing | Charging |
| Off | Charging complete |
Manually Pairing Headset and Wireless Adapter
The headset and wireless adapter are already paired together for first time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together.
- Make sure the headset is powered off.
- Plug the USB wireless adapter into the Xbox One® system.
- Use a small pin to press the small button on the back side of the USB wireless adapter for 3 seconds. The USB wireless adapter LED will be fast blinking.
- With the headset turned off, press and hold the headset power button for 10 seconds to enter pairing mode. The headset earcup LEDs will blink rapidly.
- When the USB wireless adapter LED turns solid and the headset ear cup LEDs have returned to their last used mode, the pairing process has been completed.
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/headsets
Document No. 480HX-HSCFX.A01
HyperX CloudX Flight
Documents / Resources
|
HYPERX HX-HSCFX-BK-WW Cloud Flight Headset
Keyboard
[pdf] Instruction Manual
HX-HSCFX-BK-WW Cloud Flight Headset Keyboard, HX-HSCFX-BK-WW, Cloud Flight
Headset Keyboard, Flight Headset Keyboard, Headset Keyboard, Keyboard
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>