xiaomi L71 4 Pro Ear Buds User Manual

June 14, 2024
Xiaomi

xiaomi L71 4 Pro Ear Buds

xiaomi-L71-4-Pro-Ear-Buds-FIG-1

Product Overview

Read this manual carefully before use, and retain it for future reference.

xiaomi-L71-4-Pro-Ear-Buds-FIG-2

Instructions

  • Turning On
    When opening the charging case, the earbuds will automatically turn on.

  • Sleep Mode
    Place the earbuds back into the charging case and close the lid, the earbuds will disconnect and go into sleep mode automatically.

  • Wearing
    Take the earbuds out of the charging case, and insert them into your ears according to the left (L) and right (R) marks.

Connecting

Connecting the earbuds to a new device

  • While the lid is open and both earbuds are in the charge case, press and hold the function button on the bottom for 2 seconds. Once the indicator blinks white, the earbuds enter the pairing state after releasing the button.
  • The first time the lid of the charging case is opened, the earbuds automatically enter the pairing state.

Dual-Device Connection

  • The earbuds can be connected to two Bluetooth devices simultaneously.
  • You can enable Dual-Device Connection in Bluetooth settings of the compatible device or More
  • Settings of the Xiaomi Earbuds app after you connect the earbuds to a smartphone.
  • After connecting the earbuds to the first device, put them in the charging case and open the lid.
  • Press and hold the function button on the charging case for 2 seconds, then the charging case’s indicator will start blinking white, and the earbuds are ready to be paired with a second device.

Restoring Factory Settings
While the lid is open and both earbuds are in the charging case, press and hold the function button on the bottom for about 10 seconds. Once the indicator blinks orange and the button is released, the earbuds will restore the factory settings and enter the pairing state again.
Note: Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.

Replacing the Ear Tips

  • Please change the ear tips of both earbuds according to the noise cancellation effect and level of comfort.
  • The size M ear tips are pre-installed on the earbuds.

Short press the Pinch Control Area once

  • Music: Play/Pause Call: Answer/End call
  • Short press the Pinch Control Area twice in a row
  • Music: Next track Call: Decline a cal
  • Short press the Pinch Control Area three times in a row
  • Music: Previous track
  • Long press the Pinch Control Area to switch
    Noise cancellation mode/Transparency mode

Charging the earbuds
When the earbuds are placed in the charging case, they will automatically start charging.

  1. Please use the supplied or a certified USB-C cable to charge the charging case.
  2. Please place the charging case in the centre of the wireless charger with its indicator facing upwards. The indicator lights up if wireless charging is enabled correctly.
    Note: Only use certified Qi-compatible chargers.

Connecting with App

  1. Scan the QR code to download and install Xiaomi Earbuds to enable more features.
  2. Ensure that the earbuds are in the charging case, close the lid, and keep it close to an unlocked and Bluetooth-enabled smartphone; open the lid, and follow the instructions on the app interface to connect the earbuds.
    Compatible with: This product only supports certain Android or iOs systems. For detailed information, please check the product page on www.mi.com.

Specifications

  • Product: Wireless Earphones
  • Model: M2126E1
  • Charging Port: Type-C
  • Operating Temperature : 5°C to 40°C
  • Earbud Input : 5 V = 280 mA Max. (per earbud)
  • Earbud Cell Capacity/Energy: 53 mAh/0.2 Wh (per earbud)
  • Charging Case Battery Capacity/Energy: 565 mAh/2.1Wh
  • Charging Case Input: 5 V = 2.3 A Max.
  • Charging Case Output: 5 V = 560mA
  • Bluetooth Profiles: Bluetooth® 5.3
  • Operating Range: 10 m (in an obstacle-free environment)
  • Bluetooth Operation Frequency: 2402-2480 MHz
  • Bluetooth Maximum Output Power: 20 dBm
  • Wireless Charging Operation Frequency: 110.2-144.2kHz(Only Receive)

EU Declaration of Conformity

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type M2126E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

UK Declaration of Conformity

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type M2126E1 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html

  • This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits depend on whether this equipment is used against the head or on the wrist. The SAR limit is 2.0 watts per kilogram averaged over 10 grams of tissue for use against the head and 4.0 watts per kilogram averaged over 10 grams of tissue for use onthe wrist.
  • During testing, this equipment radios are set to their highest transmission levels and placed in positions that simulate use next to the head.
  • When placing this equipment near your head, keep at least 0 mm of separation to ensure exposure levels remain at or below the as-tested levels.
  • After testing, the highest SAR values are as follows: Next to the head: 0.17 W/kg

Important Safety Information

  • The product has a built-in battery that can not be removed or replaced. To avoid damage to the battery or the product, do not disassemble or modify the battery by yourself. The battery can only be replaced by the authorized service providers and must be replaced with the same type. Replacement of a battery with an incorrect type may defeat a safeguard (such as catching fire, explosion and leakage of corrosive electrolyte). Do not put the battery in trash that is disposed of in landfifills. When disposing of the battery, comply with local laws or regulations.
  • Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
  • Do not expose the product to environments with a temperature that is too low or too high (below 0°C or above 45°C).
  • Keep the product’s indicator away from the eyes of children and animals while the product is in use.
  • Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
  • Do not clean this product with alcohol or other volatile liquids.
  • Avoid any contact with liquids.
  • Do not disassemble, puncture or crush the product nor expose it to fire.
  • Stop using the product immediately if there is any swelling.
  • Do not use the earbuds while driving, and comply with the relevant regulations in your region or country.
  • These earbuds and their accessories may contain small parts. Please keep them out of the reach of children.
  • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
  • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Product information and certification marks are located in the charging case.
  • To prevent possible hearing loss, do not use this product at high volume for long periods of time.
  • The symbol indicates DC voltage. that can result in an explosion.

WARRANTY NOTICE

  • As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi’s official website  https://www.mi.com/en/service/warranty/. Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user’s negligence or fault are not warranted.
  • The contact person for the after-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
  • The present warranties do not apply in Hong Kong and Taiwan.
  • Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaom’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
  • Disclaimer: The illustrations of the product, accessories, user interfaces, and other elements in this User Manual are schematic diagrams for reference only, and they may be slightly different from the actual product. This manual is published by Xiaomi or an enterprise in Xiaomi’s ecosystem. Typographical errors and inaccurate information in this manual or the related programs and/or equipment may change without prior notice. Such changes will be indicated in the latest version of the manual.

ABOUT COMPANY

  • Manufactured by: Xiaomi Communications Co., Ltd.
  • Address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
  • For further information, please go to www.mi.com
  • Importer:
  • Beryko s.r.o.
  • Pod Vinicemi 931/2, 301 00 PIzeñ
  • www.beryko.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals