MISIRUN GT88 Ultra Smart Watch User Manual
- June 14, 2024
- MISIRUN
Table of Contents
MISIRUN GT88 Ultra Smart Watch
Welcome
Welcome to use our high-performance wristband SmartWatch which creates a thoughtful and healthy experience for you.
Device maintenance
Please remember the following tips when you maintain your SmartWatch:
- Clean the smart watch regularly, especially its inner side, and Keep it dry.
- Adjust the smart watch tightness to ensure air circulation.
- Excessive skincare products should not be used on the wrist. wearing the smart watch.
- Please cease wearing the smart watch in case of skin allergy or any discomfort.
Schematic diagram of the main body of the smart watch
Middle heart rate test, Higher charging position.
Power-on
Long press the side button for 3 seconds or plug in the magnetic charging cable to charge the smart watch.
Downloading and binding the Smart Watch APP
Download and install the app.
Scan the QR code with your mobile phone to download the app.
For the iOS system, select APP, store search Da Fit.
Android system, select Google Play to download and install Da Fit. Or scan the
QR code to download.
**Da Fit
**
| APP Store: Fit
---|---
Google Play: Da
Fit
Note: Your mobile phone must support Android 5.1 or iOS 8.0 or above and Bluetooth 4.0 or above.
Bind Smart Watch with APP
- Click on “Add Device” to bind the smart watch.
- Click on your device in the list of scanned devices.
- The iOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pair” to confirm. Connect it directly to the Android system.
- Successfully bound.
Bluetooth Call Connect
Android: After the APP successfully connects to the watch’s Bluetooth.
- The phone will automatically pop up a “pairing” request, click “Allow”.
- For some brands of mobile phone models, there is no need to pop up the pairing confirmation permission. After connecting to Bluetooth, the call function is also directly connected. After the binding is successful, you can answer and make calls on the watch.
- The watch has the phone call mode switch, which is enabled by default. If you manually close the audio mode, you need to manually open it to connect to the audio mode.
Remove the Bluetooth call connection
Android: For the Android mobile phone, the device can be disconnected from
your mobile phone by simply clicking on Remove device.
iPhone: firstly, users need to “Remove devices” on the “Da fit” app, then
enter into mobile phone Setting – Bluetooth, find GT88, click the icon on the
right “forget this device” smartwatch, and mobile phone are disconnected.
Introduction of smart watch functions
Power-on status
Switch the menu interfaces on the main screen, as the interfaces shown in the following;
-
Introduction of main interface functions
After the smartwatch and APP are first paired, the time and date on the mobile phone will be synchronised. -
Step counting, distance and calories
The step-counting interface shows steps. Wear the smartwatch on your wrist, and the smartwatch can automatically count steps, distance and calories. -
Sleep monitoring
Wearing the smartwatch at night to automatically judge whether you are in a sleep state, to record deep sleep and light sleep respectively, and to summarize the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of your wrist movements when you sleep.
Note: Because users’ sleep times and habits are different, the time of sleep monitoring is only for reference. -
Heart rate measurement
Enter the heart rate test interface, the motor will vibrate once after “Start measurement” and “Stop”, and the current measurement data will be displayed. -
Exercise
Sports interface, including a variety of sports, walking, running, cycling, skipping rope, badminton, basketball, football and so on. -
Al voice
When the smartwatch is connected to a mobile phone, talk after touching tab ,one-tab active “AI voice assistant” to make calls, check the weather, play music. -
Phone
Turn on the Bluetooth function of your phone and smartwatch. The phone searches for the smartwatch’s Bluetooth device and initiates pairing. When both parties confirm the pairing, there will be a prompt that the connection is successful. Click the dial pad of the watch to dial and answer the phone. -
Blood pressure
Enter the blood pressure test interface, the motor will vibrate once after “Start measurement” and Stop”, and the current measurement data will be displayed. The environment for measuring blood pressure should be quiet and at a suitable temperature. The user should rest for at least 5 minutes, and avoid tension, anxiety and emotional excitement before measurement. Repeatedly measure blood pressure three times with emotional excitement before measurement. -
Blood oxygen
Enter the blood oxygen test interface, the motor will vibrate once after “Start measurement” and “Stop”, and the current measurement data will be displayed.
Blood oxygen saturation (Spo2) is the percentage of the volume of oxyhemoglobin (Hbo2) combined by oxygen in the blood to the volume of all (Hb, hemoglobin) which can be combined, i.e, the concentration of blood oxygen in the blood.
Note: The data measured for blood pressure and blood oxygen are for reference only, and cannot be used as the basis for relevant medical purposes. -
Weather
The weather page will display the current weather today, and swipe up to display the weather forecast for the next 6 days. For weather information, it needs to connect with the client end before data can be obtained. If the disconnection time is long, the weather information cannot be updated. -
Messages
You can view the content pushed by the message in the information interface. At most five messages can be saved. After five messages are saved, the messages displayed before will be replaced by new messages one by one. -
Shutter
After connecting with the mobile phone, the smartwatch can be used as a remote controller for the mobile phone ‘s camera. Open “Photo Control” in the APP to “Shake” the smartwatch and click on the icon to take a photo. -
Music control
After connecting with the mobile phone, the smartwatch can control the music player on the mobile phone. When music is playing on your phone, you can use your smartwatch to control the play/pause, the previous song and the next song. -
Flashlight
After opening, the screen will be adjusted to the maximum, The brightness is always on, and you can exit the interface after swiping left. -
Game
Built-in the games that named”2048″ to help you relieve stress. -
Setting
Click the “Settings” to enter the function list, including Display, Sound and Vibration, Do Not Disturb, Power Saving Mode, Phone Switch, Call Reset, System, About, etc.
Remove Device
For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device. For Apple mobile phones after binding removal, you need to click on the symbol on the right in Setting Bluetooth and choose to ignore the device.
As shown below:
Enter the blood pressure test interface, the motor will vibrate once after “Start measurement” and Stop”, and the current measurement.
Frequently Asked Questions (FAQs)
Q: Why does the smartwatch automatically disconnect Bluetooth when the Android screen goes out?
1. Lock background APP. When the Da Fit process is cleared, the smart watch will be disconnected from the mobile phone. 2. Set APP self-startup. 3. Unrestricted background operation. The Android mobile phone installed with an app intelligently restricts the background operation by default, and the app should be set manually without any restriction.
Q: Why cannot the smartwatch receive push messages?
1. Please confirm that you have turned on the switch for message push at the mobile phone client. 2. Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smartwatch is completed by reading the message from the mobile phone notification bar. The smart watch will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification. 3. Turn on the mobile phone – Settings. Enter “Notification Use Right” on the top search box, re- open Da Fit. (Switch of Wechat, QQ, call, SMS and mobile phone client).
Q: Why can't take a hot bath with the smart watch?
Answer: The bath water has a relatively high temperature, and generates a lot of vapour,which is in the gas phase with a small molecular radius and can easily infiltrate into the smart watch from the shell gap. When the temperature drops, the vapour will condense into liquid-phase droplets which will easily cause a short circuit inside the smart watch and damage the circuit board and then damage the smart watch.
Warning:
Please consult your doctor before taking up a new exercise. The smart watch should not be used for any medical purpose, though it may dynamically monitor the heart rate in real-time.
