Electrolux PI91-5SGM Vacuum Filter User Guide
- May 15, 2024
- Electrolux
Table of Contents
Electrolux PI91-5SGM Vacuum Filter
Product Specifications
- This product is a vacuum filter guide that helps users choose the right filter for their vacuum cleaner.
- It provides information on different filter types and recommendations for cleaning and replacement intervals.
Product Usage Instructions
Choosing the Right Filter
Refer to the model series and compatible vacuum filters listed in the guide to choose the appropriate filter for your vacuum cleaner.
Cleaning and Replacement Recommendations
- It is recommended to clean fine dust filters every month, depending on use.
- HEPA filters should be cleaned or replaced every 6-12 months, depending on use.
How to Know When to Clean or Change Filters
Filters should be cleaned or replaced when you notice a decrease in suction power or after the recommended time intervals.
Cleaning or Changing Filters
Follow these general steps to clean or change your vacuum filters:
- Turn off and unplug the vacuum cleaner.
- Locate the filter compartment and remove the old filter.
- For cleaning: gently tap the filter to remove dust or rinse it with water as per the manufacturer’s instructions. Allow it to dry completely before reinserting.
- For replacement: insert the new filter according to the vacuum cleaner’s manual.
- Close the filter compartment securely.
FAQ
- Where can I purchase the recommended filters?
- The compatible vacuum filters mentioned in the guide are available for purchase at your vacuum cleaner retailer. Please note that availability may vary by country.
- How often should I clean my fine dust filters?
- We recommend cleaning fine dust filters every month, but the actual frequency may vary based on usage intensity.
- Can I use a filter from a different model series in my vacuum cleaner?
- We recommend using only compatible filters listed for your specific model series to ensure optimal performance and longevity of your vacuum cleaner.
Vacuum Filter Guide
- Choose the right filter for your vacuum cleaner using the information below
- For optimum filtration and cleaning, clean and/or replace your vacuum filter/s regularly
- It is recommended to clean your fine dust filters every 1 month (depending on use).
- HEPA filters should be cleaned or replaced every 6-12 months (depending on use).
Ways to know when your filter/s should be changed or cleaned
- When using your vacuum, if a strong or musty smell is present.
- If your filter looks damaged, bent or cracked.
- If your vacuum suction doesn’t seem to be as strong your filters may be full.
- Your vacuum performance overall is low.
- Unusual or strange noises while in use.
How to clean or change your filter/s
Fine Dust filters
- Remove the filter and empty out any loose contents/rubbish.
- Rinse under warmer water for 1 minute (max 400C).
- Leave out to dry, making sure it is completely dry before refitting to your vacuum.
HEPA filters
- Detach the HEPA filter and rinse under cold water for 2 minutes.
- Leave out in a well-ventilated room/outside to dry for 24+ hours or until completely dry.
- Refit the filter back into your vacuum.
Available to purchase at your vacuum cleaner retailer. Please note that not all models are available in all countries.
Scan here for more information.
Documents / Resources
|
Electrolux PI91-5SGM Vacuum
Filter
[pdf] User Guide
PI91-5SGM Vacuum Filter, PI91-5SGM, Vacuum Filter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>