Galanz GLHBRDRE026 4 in 1 Retro Immersion Hand Blender and Food Chopper User Manual

Galanz GLHBRDRE026 4 in 1 Retro Immersion Hand Blender and Food Chopper

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including  the following:

• Take extra precaution when operating product. Always ensure that the immersion blender shaft is thoroughly sterilized. Use a sterilizing solution in accordance with the sterilizing solution manufacturers’ instructions.
• Never touch the blades while the machine is plugged in.
• Keep fingers, hair, clothing, and utensils away from moving parts.
• Unplug after use and before changing attachments.
• Never blend hot oil, grease or fat.
• Children or minors should not use without the supervision of an adult.
• Please refrain from using if damaged.
• Refrain from getting wet.
• Keep away from hot surfaces
• Only use with authorized attachments
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Not authorized for usage by children.
• Cleaning and user maintenance shall not be done by children without supervision.
• Keep out of reach of children.
• This appliance is intended to be used in households and similar environments.
• If the supplier cord is damaged, please refrain from usage and have replaced by the manufacturer or service agent.
• The machine should not be operated by means of an external timer-switch or by means of a separate system with remote control.
• Do not leave unattended while the product is plugged in.
• Turn off the appliance before changing the accessories.
• This product shall not be used by children.
• Potential injuries can occur with misuse. Precaution should be taken when handling the blades

NOTICE
This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify this safety feature.

Model No.                            GLHBRDRE026

Power Consumption               120V,60Hz
Watts                                  260W

WHAT’S IN THE BOX

1. Power Button
2. Turbo Button
3. Motor Body
4. Stainless Steel Blending Stick with Stainless Steel Blade
5. Stainless Steel Removable Whisk Attachment
6. 700ml Beaker
7. Beaker Base
8. Chopper/ Grinder Cover
9. 500ml Chopper Attachment
10. Chopping Blades

BEFORE FIRST USE

1. IMPORTANT: Review all warnings in IMPORTANT SAFEGUARDS before
2. Carefully unpack your Immersion Blender and remove all packaging materials. Check the contents to ensure all attachments have been received in good condition.
3. Wipe the motor body and the stainless steel blending stick, whisk, chopper, chopping blades, beaker and beaker base with a clean cloth. Dry thoroughly.

PREPARING & USING YOUR IMMERSION BLENDER

This blender is great for blending, pureeing, making baby food, dips, drinks, smoothies, sauces, salad dressings, and milk shakes.
USING THE BLENDING STICK

1. Attach the stainless steel blending stick to the motor body and turn counterclockwise to lock it into position.

2. Plug the electric cord into a wall socket. Ensure that the unit is plugged in and that the power socket is turned on.

3. Place the food into the beaker or into a suitable container.

4. Insert the blending stick into the mixtures before switching on the power to avoid splatter.
   CAUTION : Immersion Blender should only be immersed in liquids the length of the attachment. Do not submerge beyond the seam of the blending attachment. Do not immerse the motor body into liquids or other mixtures.

5. Press the Power Button to activate the Immersion Blender. Select the turbo button for faster blending.

6. Move the Immersion Bender using a mashing or stirring action to blend and mix the food.

7. When blending is complete, release the Power button before removing the Immersion Blender from the mixture.

8. Release the on or turbo button and unplug immediately after use, before removing or changing attachments.

NOTE : It is recommended that the beakers are not filled more than 2/3 full, this is to allow the blending stick to move up and down without the contents spilling over.

USING THE WHISK ATTACHMENT
The whisk can be used to make whip cream, beat egg whites, mix instant puddings, vinaigrette, mixing desserts or for making mayon­naise.
CAUTION: Do not use the whisk for solid ingredients such as butter and sugar as this will damage the whisk.

1. Attach the whisk to the motor body and turn counterclockwise to lock it into position.
2. Plug the electrical cord into an wall socket. Ensure the unit is plugged in and power socket is switched on.
3. Place your food into a suitable container.
4. Press the Power Button to start with a low speed, this will prevent splatter.
5. Insert the whisk into the food and press the on button. For best results use the turbo button.
6. When the desired results have been achieved, release the ON or turbo button and turn the whisk attachment clockwise.
7. Unplug immediately after use, before removing or changing attachments.

NOTE: For best results, use the whisk in a deep container and use the whisk at an angle when whisking. Ensure when whisking egg whites that you don’t whisk more than 4 large ones at a time and ensure the whisk and bowl are clean and free from grease otherwise the results will be inconsistent.

USING THE MINI-CHOPPER
Use the Chopper attachment to chop small amounts of food such as meat, fish, hard cheese, onion, garlic, vegetables, herbs, crackers, bread, and nuts.
CAUTION : It is not suitable for chopping hard foods such as coffee beans, ice cubes, spices or chocolate as these may damage the blade.

1. Insert the Chopper blade into the Chopper bowl.

2. Fit the chopper blade over the pin in the bowl.

3. Add small pieces of foods to the bowl.
   Note: Remove any bones from meat or fish and cut food into bit sized pieces.

4. Fit the chopping bowl cover, turn and lock into position.

5. Insert the motor unit into the chopper cover and twist to lock into position.

6. Hold the bowl steady and press the ON button, or for more of a rough chop press the turbo button in short bursts to achieve a pulse action.
   Note: Hold the motor body with one hand and the Chopper bowl with the other while processing.

7. When the desired results have been achieved, twist the motor body to unlock and lift the motor body off the chopping bowl. Twist the cover to unlock from the bowl and lift off. Carefully take out the blade before pouring out the contents of the bowl. To remove the blade, slightly turn and then pull it off.

8. Unplug immediately after use, before removing or changing attachments.

CHOPPING GUIDE

Meats

|

200g (7oz)

| Remove any Bones, Gristle. Cut nto 2cm (3/4″) Cubes|

10-15

Almonds

/Nuts

| 200g (7oz)| Remove Shells. Place in Whole Nuts| 20-30
Garlic| 10-15 cloves| Place in Whole Cloves, Peeled| 15-20
Onions| 100g (3.5oz)| Cut into Quarters| 10-15
Cheese| 100g (3.5oz)| Cut into 1 cm ( 3/8″) Cubes| 25-30
Hard Boiled Eggs| 2| Place in Whole Eggs| 5-10
Carrots| 200g (7oz)| Cut average Carrot into Quarters| 15-10
Herbs| 50g (2oz)| Remove Stalks, ensure the herbs are dry| 5-10

• 1. Processing times are approximate.
• 2. Actual usage may vary depending on quality of food and desired chop size.

OPERATING TIPS

• Cut solid foods into small pieces for easier blending or chopping.
• The Immersion Blender is equipped with thermal protection from high operating temperatures. Should the Immersion Blender suddenly stop during use, unplug it and allow 10 minutes to automatically reset.
• To avoid splashing, insert the Hand Blender into the mixture before pressing the Power button, and release the button before pulling the Immersion Blender out of the mixture.
• When blending in a saucepan on a cooktop, remove the pan from the heating element to protect the Immersion Blender from overheating.
• For best blending, hold the Immersion Blender at an angle and gently move up and down within the container. Do not put pressure on the mixture with the Immersion Blender.
• To prevent overflow, allow room in the container for the mixture to rise when using the Immersion Blender.
• Do not let the Immersion Blender sit in a hot pan on the cooktop while not in use.
• Remove hard items, such as fruit pits or bones, from the mixture before blending or chopping to help prevent damage to the blades.
• Do not use your Immersion Blender to process coffee beans or hard spices such as nutmegs. Processing these foods could damage the blades of the Immersion Blender.
• Do not put the pitcher or chopper bowl in the microwave oven.
• The stainless steel Whisk may scratch or mark non-stick coatings; avoid using the whisk in non-stick cookware.
• To prevent splattering, use the Whisk attachment in deep containers or pans.

CARE & MAINTENANCE

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Contact the customer service department for any unusual issues you may experience.
CAUTION : Never immerse the motor body, plug or cord in water or any other liquid.

1. Wash the stainless steel blending stick, whisk, chopping bowl, chopping blade, beakers and beaker base in warm soapy water. These could be placed into the dishwasher for cleaning.
2. Some foods may discolor the plastic especially food such as carrots. To help remove the discoloration, dip a kitchen towel into vegetable oil and rub on the affected area.

STORAGE

1. Unplug and clean unit.
2. Never store the Immersion Blender while it is hot or plugged in.
3. Never wrap the cord tightly around the appliance and do not place any stress on the cord. Store the Immersion Blender in a clean, dry place.

PRODUCT WARRANTY

This warranty applies to products sold by Galanz Americas in the U.S. This warranty is in lieu of any other warranty and expressly applies to the individual product only.
Galanz product is warrantied for one year following purchase for defects in material and workmanship. Please save your receipt as proof of purchase is required to make a warranty claim. During this warranty period, we will provide the replacement cost of this product, a replacement or the equivalent,or repair per our discretion.
The warranty cannot be transferred through resale, including the resale through a 3rd party unauthorized retailer and is only bestowed upon the original consumer purchaser upon purchase from an authorized retailer.

This warranty does not cover and excludes damage or defects caused by:

• Consumer misuse
• Abuse
• Neglect including the failure to clean and/or provide adequate regular maintenance as outlined in the user manual
• Commercial use
• Subjecting the product to any voltage outside the specified
• range
• Loss of parts
• The affixing of any attachments not provided with the product
• Accident, or
• Use in a manner not intended and outlined in the user manual.
• Any subsequent damages caused by the above listed exclusions will not be covered and any claims determined to meet the above exclusions will be denied. All liability is limited to the purchase price and does not include any:
• Retail offered extended warranties
• Tax
• Other charges(including postage to send required materials)
• Incidental and/or consequential damages associated with the product in question.

Every implied warranty, including any statutory warranty of merchantability or fitness for a particular purpose is disclaimed except to the extent prohibited by law, in which case such warranty is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states do not allow limitations on implied warranties or special, incidental, or conse­quential damaged, so the above limitations may not apply to you.

If you have a claim under this warranty, please call our Customer Service number: 1-800-562-0738.
For faster service, please have the model number, serial number, and receipt ready for the operator to assist you.

WARRANTY REGISTRATION

Please mail this warranty card to address below within 30 days of purchase. Or you can register your product on line by going to www.galanz.com\us.
Galanz Americas, 55 Challenger Road, Suite 503, Ridgefield Park, NJ 07660.
PLEASE PRINT CLEARLY.

Name ————————-
Address ————————-
City ___ State _ PostaI Code _
Phone Email —————
Model Number Serial Number ——— ——–
Purchase Location ———————

You must attach a copy of your purchase receipt to validate your registration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>