Baseus BAS-0014 Magnetic Mini Wireless Fast Charge Power Bank User Manual
- June 14, 2024
- Baseus
Table of Contents
Baseus BAS-0014 Magnetic Mini Wireless Fast Charge Power Bank
Safety tips and warnings
Improper use of the product may result in the battery not operating properly or causing severe overheating, which could result in a fire or explosion. To avoid personal injury and property damage, please follow the instructions below when using and storing this product.
- This device is NOT a toy11! They should be kept: out of the reach of children. Children should not be allowed to operate this appliance as this could result in an accident.
- This device should be charged: using a charger that complies with local safety standards, taking into account all dangers and risks of damage.
- DO NOT apply pressure to the device and avoid hitting it. The battery and circuit powering <1CY magic! be damaged if the device is dropped from a great height, receives a large shock or is immersed in liquid. In this case you should avoid: using the product.
- If the device becomes deformed, no longer leak-tight or its performance drops dramatically, it should be discontinued.
- You should NOT charge the power bank or other devices in places where they would limit the dissipation of heat from their housing, such as trouser pockets, closed pockets, bags, and couches. The device should not be covered during operation. If you charge other devices for a long time, DO NOT: y setC: No device on the power bank because. could be limited: heat dissipation from its housing.
- This equipment SHOULD NOT be disassembled, subjected to pressure, pierced, immersed in water, thrown into fire, exposed to high temperatures or heat sources above 140°F (60°C) or subjected to a short circuit.
- DO NOT place: the device in places where extremely high temperatures occur. For example, in a place where there is direct sunlight or in a vehicle with a higher internal or external temperature.
- This device contains lithium batteries, DO NOT disassemble it! This could result in danger or damage to the battery.
safety instructions
- Before using the device for the first time, it must be fully charged: Powerbanks May <1. specSlon<1. energy conversion efficiency, di ate capacity
- the power bank does not equal the energy needed to charge another device. 3. Select an appropriate charger to recharge the power bank and appropriate cables when charging other devices.
- Please take care of this when charging this device. DON’T: Hive animals, leaving them unattended.
- After you have finished charging your power bank or other device, please clean the cable to maintain the integrity of the product.
- If you press the power button and the Niksii indicator does not light up, you need to charge this product again.
- During long-term storage, the battery charge will decrease to between 25% and 50%. The device should be placed in a dry and cool environment. To reduce battery aging, avoid storing the product with an empty or fully charged battery.
- Do not disassemble the product yourself. Improper use or placement of the product may shorten its service life or cause damage, for which our company is not legally responsible and does not provide any warranty. We ask for your understanding.
- During wireless charging, there must be no metal objects or materials (such as: iron plates, rings, metal phone cases, etc.) between the back of the phone being charged and the charging area.
- If any interference or overheating of the device occurs during wireless charging, it may mean that the pickup coil of the phone being charged is not completely aligned with the wireless charging coil. It also means that there is a metal object inside the phone case. Try to cool down the phone first, remove the protective case, and then place it in the right place.
Product parameters
- Name: P owerbank
- Model No.: PPCXM20
- Battery: Lithium polymer
- Capacity(:: 20,000 mAh /74 Wh
- Coefficient 6/energy conversion factor: 75% C-type
- input: 5V-3A; 9V-2A
- Type C output: 5V-2.4A; 9V-2.2 2A; 12V-1.5A
- Wireless output power: SW/7.SW/low/l SW
- Total output power: 5V-2.4A
- Device dimensions: lll, 3X70,4X30.9 mm
- Device weight: approximately 360g
Package contents
- Power bank, l pcs.
- Instruction manual, pcs.
- Warranty card, pcs.
- Charge cables<1CY,1 pc.
Product structure diagram
Product description
- A portable charging device that charges wired or wireless mobile phones, tablets, game consoles and other devices digital. It uses a magnetic nozzle and supports fast-charging
- Apple 20 W PD, fast bidirectional charging via Type-C connector, fast 15 W wireless charging, etc. It has a built-in security system against damage by external objects, pretending, excessive discharging, temperature, and other failures.
Operating conditions
- Operating temperature: non-tropical area, from 0°C to 35°C
- Storage temperature : 0°C to 40°C
Description of icons
- The 5-year icon refers to “an important period of use in a friendly way environment” and not to the product quality assurance period. Electronic products contain toxic and harmful substances such as nitrogen, mercury, and cadmium. Too long
- The use of these products may lead to leakage or excess of these toxic and harmful substances, cause environmental pollution or serious injury to people, and damage to property. The concept of “useful period” or “environmentally friendly way” means that all electronic products should only be used within this validity period. We are not responsible for any responsibility for safety issues related to using this product beyond its safe service life.
- Operating instructions During wireless charging
- This product has automatic wake-up functions for the purpose of wireless charging, just place your phone on it to charge started automatically. Due to incompatibility, some phones require activating the wireless charging function using a button. Press the button once and the battery indicator will illuminate starting wireless charging.
- Then place the device in the loading area. Wireless charging mode will turn off automatically if nothing is placed in the charging area within 30 seconds.
- Wireless charging tips
Place your phone on the wireless charging area (as shown in Fig drawing) to start wireless charging. To charge a wireless device, the distance between the charging phone and the power bank must be a maximum of 8 mm. Otherwise, charging will be interrupted and you will need to adjust the phone’s connection.
Statement on Toxic and Hazardous Substances in Electronic Information Products
This form is compiled in accordance with SJ/T 11364.
- O: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in the GB/T 26572 standard.
- X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in the GB/T 26572 standard.
This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
FCC ID : 2A482-PPCXM20
Warning Please follow the above safety instructions damage roll causes fire,
deck shock,
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB/T 35590
Hotline: +86-4000-712-711
Website: www.baseus.com
Official After-sales E-mail Address :
care@baseus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>