Nictemaw XQB60-818-B Fully Automatic Washing Machine Instruction Manual

Nictemaw XQB60-818-B Fully Automatic Washing Machine

Product Information

Specifications

• Model: XQB60-818-B
• Dimensions: 30190mm
• Country of Origin: China

Product Usage Instructions

Precaution

Before using the machine, please read and understand the following precautions:

• Ensure the machine is placed on a stable and level surface.
• Do not overload the machine with excessive laundry. Follow the recommended load capacity mentioned in the user manual.
• Keep the machine away from direct sunlight and sources of heat.
• Do not operate the machine with wet hands.
• Unplug the machine when not in use or during maintenance.
• Do not use the machine if the power cord or plug is damaged.
• Keep the machine clean and free from dust and debris.

Shooting Instruction

The machine undergoes water inflow and outflow testing during production. As a result, there might be water residue or traces of water inside the sink. This is a normal phenomenon and does not indicate a defect in the product.

Frequently Asked Questions (FAQ)

Q: How do I clean the machine?

A : To clean the machine, follow these steps:

1. Unplug the machine and wait for it to cool down.
2. Wipe the exterior surfaces with a damp cloth.
3. Remove any lint or debris from the filter and drain pump area.
4. Run a cleaning cycle using a washing machine cleaner or a mixture of vinegar and water.
5. After the cleaning cycle, wipe the interior drum with a dry cloth.
6. Plug the machine back in and it is ready for use.

Q: Can I use bleach in this machine?

• A : It is recommended to check the user manual for specific instructions regarding the use of bleach. Some machines have a dedicated bleach dispenser while others may require manual dispensing.
• Follow the guidelines provided in the user manual for safe and effective use of bleach.

NAME OF PARTS

• Note: All the drawings in the manual a schematic diagrams.
• Due to the product improvement, the product you get and its accessories may be not the same as this manual, please understand.

Marks Instruction

• Warning sign With this symbol, you should have to operate strictly according to instructions. If not, it may cause damage to a washing machine and even endanger the user’s life.

Forbidding Sign

• All with this symbol, there is something we are forbidden to do in any way, if not, may cause damage to a washing machine and even endanger the user’s life.
• Please check the power socket carefully and make sure the ground wire is connected for safety operation.
• A power supply is 110V/60 Hz.
• Each machine will be tested for water inflow and outflow during production.
• Therefore, there may be water residue or traces of water inside the sink, which is a normal phenomenon.

IMPORTANT SAFETY PRECAUTION

• Please connect the plug to the 110 V power socket, and make sure the ground wire is connected firmly. If possible, please use the waterproof protector.
• Please make sure you can remove the plug conveniently when using the machine. You should have to remove the plug and stop the water- supply when the power is off or when moving the machine or cleaning the machine.
• You should not fix or remove the plug with wet hands.
• Do not over-bend, stretch, and press the power cord.
• Please keep the plug clean and dry.
• If there is some trouble with the power cord or plug, Please call the professional to deal with it.
• If the washing machine is installed on the ground with carpet, please make sure the carpet not block the vents.
• Do not pour the hot water over 50°C into the tub.
• Please do not place the machine in the bathroom.
• Such action may damage the electrical insulation.
• Do not clean the machine with spray water.
• Do not put wet clothes,heavy and hot things on the top of the machine.
• Do not wash waterproof clothing such as raincoats, car covers, etc.
• Abnormal vibration may occur in the spin tub.
• Pay special attention to washing the floating clothes to avoid damage.
• Do not share one power socket with other electrical appliances.
• Do not use an unappointed power source.
• Keep the plug strip clean.
• Never put your hand into the tub while the machine is working. Keep children away from the machine.
• Do not disassemble, repair, and repack the machine by yourself.
• Do not put heavy or hot things on the top of the machine.
• Do not wash laundry soaked with petrol and organic solvent.
• Keep the machine away from children, persons with physical, sensory, or mental disabilities, or anyone who is not familiar with the usage of this machine, unless guidance is given.
• Keep the machine away from heat-generating equipment and avoid direct sunlight.
• Make sure the filter is in good condition and fixed well before washing.
• Please make sure the inlet hose is fixed correctly. Put down the drain hose and supply water before washing.
• We suggest using a few-foam detergent.
• Do not use the machine when the temperature is below 0 C. To avoid damage to the machine and to have a good washing result, please reuse the machine after placing it in the warm area for 2 to 4 hours if it is placed somewhere below 0°C.

INSTALLATION &ADJUSTMENT

• For users to use the machine safely and correctly, please install and adjust the machine according to this instruction.

Remove Package

1. Open and remove the carton box, and take the rat-proof board out.
2. Open the top cover of the washing machine, and take out the accessories from the tub.
3. Remove other packages, including the rose Plastic in the base foam.

Fix the rat-proof board

• Tilt the back of the machine a little.
• Put the Rat-proof board up and follow the arrow direction to insert the board on the bottom of the machine and fix it well.

Adjustment

• Keep the machine away from the wall more than 20mm. The maximum allowance inclination angle between the ground and palm is 2° Uneven or tilted ground may cause the machine unevenly running or stop working.

• Please adjust the machine as follows

Level

• Hang a rope with a tied hammer to confirm whether the machine is in the level line.

Adjust

• Adjust the adjustable feet slightly up, and rotate the feet until arrive at the level line.

USAGE OF DRAIN HOSE

1. Unload the screws of the back covers with a screwdriver. Remove the back cover and unload the clips.
2. Take the hook of the drain hose and put the drain hose out from the base.
3. Unload the block cover from the base, and put it back in another hole in the base.
4. Put the drain hose through the opposite side of the hole for the drain hose. Fix the drain hose well.
5. Put the drain hook onto the drain hose.
6. Put back the back cover onto the machine and fix it well.

Keep the drain hose running smoothly.

1. The height of the drain hose should be less than 100cm . Otherwise, it will cause draining not to smooth, and even the machine will stop working if it takes a long time to drain water.
2. Do not stampede or press the drain hose.
3. If the drain hose is too long, it can be cut shorter. In order to have better water flowing, please cut the hose obliquely.
4. If you need to have a longer drain hose, please buy the drain hose separately and add it in. The dia. of the drain hose should be the same or over 30mm dia. and the length should be less than 1.5m.
5. When adding the drain hose, please cut from A or B.

INSTALLATION OF INLET HOSE

Note carefully:

1. Please use the new water inlet hose assembly from the package. The old water inlet hose assembly should not be reused.
2. Allowed input water pressure: 0.03~0.85Mpa.

Correct Faucet

• The depth of the end mouth should be more than 10mm. The end mouth should be smooth.
• Please use the file to polish it to avoid leakage.

Connect the inlet hose to the faucet

1. Slide down the slider to unload the inlet-water connection from the inlet-water assembly. (See picture 1)
2. Make sure the exposed thread is 4mm(see picture 6).1f the exposed thread is less than 4mm, please loosen the nut and make the exposed thread 4mm.
3. Loosen the inlet water screws to an appropriate position and connect them to the faucet, see picture 2.
   • (If the mouth dia. of the faucet is too big, the inlet water hose cannot connect with the faucet, please loosen the 4 screws and unload the bush, see picture 3.
4.  Tighten the screw equally, see picture 4.
5. Fasten the nut, see picture 5. The length of the exposed thread after tightening should be less than 2mm, see picture 6.

Note carefully:

1. Please use the new water inlet hose assembly from the package. The old water inlet hose assembly should not be reused.
2. Allowed input water pressure: 0.03~0.85MPa.

Connect an inlet water hose to a washing machine

Inlet valve connection Absorbent pad

Connection of inlet water hose

1. Press down the slider, and insert the hose into the connection.
2. Lose the slider until hearing the “CLICK” sound.

Check the connection

1. Pull the inlet hose slightly to confirm it is fixed well
2. Open the faucet to check the leakage.
3. Do not bend the hose with strong force.
4. Please check the connections and keep it fixed well every time before using.

Unload the inlet hose

1. Close the faucet.
2. Press down the slider to take the hose down.

There is no need to unload the inlet hose if you use the washing machine over 1 time per week.

PREPARATION

Preparation before wash

1. Fix the inlet hose well to a faucet, and open the faucet.
2. Make sure the socket is ground-connected before you make the plug-in power.
   • The ground-connected should not be connected to any of the gas pipeline and water pipelines.
3. Put the drain hose down.
4. Place the washing machine on level.

Note:

• Water temperature SHOULD NOT be over 50°C
• Check the laundry before wash

1. Check and make sure the laundry is fit for washing in the washing machine, and suitable for washing in water to avoid clothing being deformed.

2. Do not wash decolorized clothing together with normal clothing.

3. Make sure the laundry has no coins, clips, buttons, needles, etc.

4. Fasten the buttons, and zipper of the articles of clothing. Turn them inside before washing.

5. Put the floating articles of clothing down to the bottom before washing. If the clothing floats on the surface of the water, Please press the “Pause/Start” button to stop washing and press the clothing down to the bottom and Press”Pause/Start” button to restart washing again.

6. Do not wash water-proof laundry such as shower curtains, raincoats, etc. Do not
   wash carpet and electric blanket to avoid abnormal vibration and accidents.

7. Put the underwear, panty, bra,clothing with lace, nylon, and thin fiber into a special washing net before washing.

8. Do not wash the clothes with volatile stains.

9. Do not overwash. Please put the denim jeans and large clothes loosely into the tub.

• Do not wash the carpet and an electric blanket!
• Do not spin the worsted wool fabric clothes to avoid clothes shrinkage and deformation.
• Do not spin the down clothes and waterproof items of clothing to avoid dangerous!

PUT IN WASHING AND DETERGENT

• The capacity is the allowed maximum standard weight of dry laundry in one operation.
• Laundry thickness size, type, etc. will affect the actual washing capacity. It is better to put the appropriate laundry into the washing machine.
• Put detergent in the tub.

Weight of laundry for reference

• Work-wear(upper&pants) (about 0.8~2.46 lb in cotton)
• Jeans (about 1.76 lb)

PROGRAM OPERATION

• Optional Levels, default level 6.
• Program/preset button 10 different washing procedures
• Common, 02 Normal, 03 Quick, 04 Blanket, 05 Air dry(Push button “Level / Air-dry” could choose dry time),06 Soak,07 Wash,08 Spin, 09 Wash and Rinses, 10 Rinses and Spin.
• Under the initial state press this button for 2 seconds to enter the appointment with 0-24h adjustable.
• Start/Pause Button
• Powered on, press this button to launch the machine.
• During runtime, press to pause, then press again to start.
• Power Button press ‘Power’ to connect the power.
• Switch on the power button to cut off the power.
• Child-Lock: Press the ‘water level’ and ‘Program’ Buttons together.
• Cancel Child-Lock: Press the ‘water level’ and ‘Program’ Buttons together again.

MAINTENANCE

• Please cut flewersuey when eating and eating the scraps and debris
• Please cut off the power supply when cleaning and clearing the scraps and debris.

The usage of filter

• Must use a filter during washing.
• The user should have cleaned the filter after finishing washing.
• Installation and movement of filter:

1. Press down the elastic plate in the upper of the filter, then pull out the filter, see picture 1.
2. Pull out the back cover of the filter by pulling the end of the back cover, see picture 2.
3. Clean the filter.
4. Put the upper back cover into the upper filter, and press the end of the back cover into the front filter, see picture 2.
5. Put the end filter into the filter box. Press the upper filter into the box.
6. Make sure the filter is fixed well to avoid loose when washing.

• Filter in inlet valve could be blocked easily.
• Users should use a brush to clean it every 2 months.
• When the body is dirty, please clean it with wet wipes:
• Do not wash with spray water.
• Clean with a neutral detergent.
• Never use or apply alcohol, thinner, gasoline, kerosene, and the like. This will damage the machine.

Note:

1. When finish washing, please turn off water supply if necessary, and unload the water inlet hose).
2. Please do not leave water in the tub for a long time. Drain the water every time when finish washing.
3. Please remove the plug from the socket before maintenance.
4. Hang the plug and drain hose well Use the clean and soft wipes to clean the machine. Open the cover for about 1 hour until it is dry, then close the cover.

TROUBLESHOOTING

• Before you call for a technician or send your machine for repair, please check this troubleshooting list :
• Do not attempt to repair the machine by yourself.

connected

well to the power outlet.

| l.Connect the plug well to the

power outlet.

2. There is no power in the

power outlet.

| 2. Check the power outlet or

connect to another power outlet.

3. The”Power” is not pressed

down to offer power.

| 3. Press down the “power”.
4. There is no power supply at all.| 4. Start again when supplying power.
water inlet hose in leakage| l.The Inlet hose is not fixed well to the faucet.| l.Fix the inlet hose well to the faucet again.
2. The inlet hose is not fixed well to the washing machine.| 2.Fix the inlet hose well to the washing machine.

Unable to drain.

| l.The level of the draining mouth is too high or the drain hose is not put down.| l.Put the drain hose down.
2. The drain hose is bent or blocked.| 2. Put the drain hose well,

and resolve the block.

Unable to input water| l.There is no water supply.| l.Start again when supplying water.
2. The faucet is not open.| 2.0pen the faucet.
3. The inlet is blocked.| 3. Clean the inlet.
Stopped during spinning| The spinning laundry is not

balanced.

| The machine itself would

automatically correct the imbalance by adding water.

Unable to spin

| l.The top cover is open after

draining.

| l.Close the top cover well.
2. Reopen the top cover when spinning.| 2. Close the top cover well.
Spin intermittently when spinning| It is for better spin results.| It is normal. Don’t worry.
There is some water in the drain hose when first use| It is the little water left in the machine when testing in the factory.| It is normal. Don’t worry.

Phenomena The reason to settle

The digits on displays ED.| •  The top lid is opened during the reserve procedure.| •  Close the top lid.
---|---|---
The drainage cannot work or is too slow. The digits on displays El.| •  Is the drain hose put down?

•  Is the drain hose blocked?

| •  Put down the drain hose.

Open and close the top lid once.

•  Clean the foreign material. Open and close The top Lid Once.

It stops running in midway.

The digits on display are E2.

| •  The top lid is not closed.| •  Close the top lid.
The safety switch acts and the spinning cannot work. The digits on display E3.| •  Are the laundries put slantingly?

•  Is the machine slanting?

| •  Reorder the laundries. Close the top lid.

•  The machine will start running after seconds of

being placed horizontally.

The water filling does not work, the digital displays E4.| •  Is the water tap opened, or is there a water supply failure?

•  Is the water inlet valve blocked?

•  Is the water pressure too low?

| •  Open the water tap. Open and close the top lid once.

•  Clean the water inlet valve. Open and close the top lid once.

•  Open and close the top lid once. Use until the water

pressure is normal.

The digits on displays E6.| •  The water level sensor is bad| •  Please contact the after-sales service

department.

The machine does not act| Not wash| •  Is there a power failure?

•  Is the power plug inserted tightly?

• Has the water level reached the preset position?

| •  Please use it when there’s a power supply.

•  Insert the power plug tightly.

•  Fill the water to the preset position.

Not spin| •  Is the power plug inserted tightly?

•  Is the top lid closed reliably?

•  Are the laundries set flat?

| •   Insert the power plug tightly.

•  Close the top lid.

•  Set the laundries flat.

There’s an abnormal sound inside the machine| •  Is the machine slanting?

•  Are the laundries put slantingly in spinning?

•  Are there any foreign materials?

| •  Adjust the machine to be even

•  Reorder the laundry and close the top lid.

•  Remove the foreign materials.

The water tap leaks| •  Is the screw of the jointer of water inlet hose loose or awry?| •  Fasten the screw of the jointer properly.

PACKING INSTRUCTION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>